Elonex eTouch 702ET V2 Quick Start Guide

Menu Icons

At the top of your screen are the Menu icons. These give you important
information about the status of the eTouch™ as well as options and shortcuts.

You can quickly see whether you are connected to Wi-Fi (the number of Wi-Fi
bars increase or decrease depending on the signal strength), the amount of
charge in your battery. Tap the Back button to go back to the previous
screen.

In addition tapping the time displays app status messages. Tapping the
settings icon gives access to changing further options such as brightness and
access to the full settings screen

Program Menu

On the top right hand side of your home screen is the Apps menu icon. Tap
the square icon open a menu of your installed apps. To open an app just tap it
once and it will launch.

Using Apps

System Panel
Your eTouch ‘multi-tasks’ so programs are never shut down until you
turn the tablet o. With too many programs open you may notice a drop in
performance so its best to periodically close some down. To do this, open the

System App (on rst use press OK), tap the app you wish to close, then tap
End Task to close the selected apps.

Wi-Fi Signal Strength

Battery Charge

Volume Down

Volume Up

Back

Menu

Return to Homescreen

Program Menu

Telephony / 3G

(included for future use)

Security

You can increase the security
settings to protect your eTouch™ by
using a unique unlock pattern. Tap
to Settings > Location and Security
> Setup Screen Lock, choose the
lock type and follow the on-screen
instructions.
Please note that
your unlock
pattern should
use at least 4
dots and the
eTouch™ will be
more secure with a greater number
of dots included in the pattern.

Android is a trademark of Google Inc. Use of this

trademark is subject to Google Permissions

Connecting to
Wi-Fi

Follow the instructions below to
connect to a Wi-Fi Connection:

:: From the home screen tap

Settings, then Wireless and
networks.

:: Then tap Wi-Fi to turn on the
eTouch™’s Wi-Fi module

(please note that this will use your
battery life faster).

:: Tap Wi-Fi Settings, then Add
Wi-Fi Network. The eTouch™ will

then automatically scan for
available Wi-Fi hotspots.

:: Select the desired Wi-Fi hotspot
from the list.

:: If the hotspot doesn't have a
password it will automatically
connect, however if it ‘secure’, a
password window will pop up
letting you enter the correct
password. For password details
refer to your ISP or the sta at the
internet cafe/coee shop etc.

:: You should now be connected and
can surf the Internet by tapping
the Browser icon. To view a web
page tap the white bar at the top
of the screen to enter a web
address, or tap the Google search
bar to enter a search term.

Wi-Fi Connection
Troubleshooting

If you have trouble connecting to
your Wi-Fi please check the
following:
:: Check you have included any
CaPiTaL letters as most passwords
are case sensitive
:: Check you haven’t got CAPS lock
toggled ON.
:: Check you have the correct
password for the hotspot and it
hasn’t been changed.

If you still can’t connect there may
be a temporary conict with your
router’s security authentication.
Please contact your Internet Service
Provider, requesting to temporarily
lower the router’s security
encryption to WEP which will allow
the Tablet to connect to the
internet.

Once connected, you should have
no further problems with getting
online you can request that the ISP
return the encryption to its former
status. This can all be done over the
phone in a couple of minutes.

Tech Support

If you have any diculties
connecting to the internet please
contact our support helpdesk on

(Mon- Fri, - 5p/min from a BT landline, other
networks and mobile will be considerably more
expensive).

0871 222 3456

Files and Folders

To browse your les and folders tap the Explorer.

To copy and paste les from one folder to another, tap and hold the original
le for about 1 second. A menu will pop up with options to Copy, Delete,
Rename. Tap Copy (to create a duplicate of the le) or Move (to move the
existing le). You can then navigate to the destination folder where you want to
copy the le and press the clipboard icon at the bottom of the screen. Then tap
the le once more and tap Paste.

Connecting to a PC

The easiest way of transferring les to and from your tablet is using a Micro SD
Card. However, you can connect the tablet to a PC or laptop using a mini USB
cable. With the eTouch turned ON, connect the cable between the Micro USB
port on the top of your eTouch to the USB port on your PC or laptop. Tap the

time at the bottom to show a notication “USB Connected, Select to copy
les to/from your computer”. Tap this and then “Turn on USB Storage” to

enable data transfer.
On your PC or laptop the tablet will show up as
“Removable Device” (just like a normal USB stick)
and you can drag and drop, or copy and paste les
to and from the eTouch’s folder.

QUICK

START
GUIDE

Introduction

Please read this quick start guide
carefully to help you get the most
out of your eTouch™.

Package Contents

Before using your eTouch™, please
check your package contents to
ensure there aren’t any items
missing. If any of the listed items are
missing or damaged, please contact
your point of purchase for
assistance.

The package includes:

1. 7” eTouch™ Tablet

2. Mains USB Power Adaptor

3. Quick Start Guide
& Warranty Card

Setting up

Your tablet has a screen protector (a
thin lm to protect the screen
during transit). Please use the tab to
slowly and very carefully remove
this from the screen as it will reduce
the quality of the screen image.

Software Lock-Up

If software becomes unresponsive,
connect the power cable.
If your eTouch still doesn’t respond,
Hold down the power button for 10
seconds to hard reset the device,
your user data will not be lost.

Help & Support

To help you get the best out of your
product we provide you with a
limited 1 year Return to Base
Warranty and Support Helpdesk
(see www.elonex.com for more
details).
For all technical support please
contact our helpdesk using the
details below:

0871 222 3456

(Mon- Fri national rate)

eMail Questions

[e-mail]

FAQ’s and Updates

www.elonex.com/support

If you have any problems or

questions please

DO NOT take your eTouch™

back to the store.

Please contact us for some

(this does not aect your Statutory Rights)

helpful advice.

Battery Charging

Your eTouch™ has a built in
3000mAh rechargeable lithium
battery which provides around 5
Hours battery life (depending on
usage).

The eTouch™ is supplied with no
charge in the battery and we
recommend that you charge the
battery for around 8 Hours for its
rst charge, to achieve the best
battery life.

Memory &
Expansion

Your eTouch™ comes with built in
storage, with 2.6GB available for
media les, but will also support up
to a huge 32GB Micro SD card to
store your favourite music, movies
and photos.

To insert a micro SD Card
Insert the card with the metallic
connectors facing downward until
you feel a click which will lock the
card into place.

To remove an SD Card
Go to Settings > Storeage, then tap
‘Unmount SD Card’ to allow you to
safely disconnect the card from the
Tablet. Push the card gently
inwards until you hear a click and
then it will pop out.

About your
eTouch™

With its amazing LED backlit
touchscreen navigating around the
eTouch™ is as easy as a quick swipe
of your ngertips. The Android™ OS
is specically designed with large
buttons and icons which suit the
size of your ngers. You can touch,
tap and swipe the screen, just like
you’d use a mouse, but please don't
use sharp or pointed instruments as
you may damage the screen.

The eTouch™ has a built in
G-sensor which ips the screen
into any orientation, letting
you use it for games, in
landscape, portrait or even
ip it over to show a friend.

micro SD Card slot

5V-DC Power

Input

3.5mm
Audio Port

Microphone

Home Button (Click once)

Click to go to your homescreen

Recent Button (Click & Hold)

Hold to view your recently used apps

Menu Button (Click once)

Click to go to open the menu

Keyboard Button (Click & Hold)

Hold to view the keyboard

Turning your eTouch™ on

Once you’ve charged the battery you can turn the eTouch™ ON by pressing
the power button and the Android™ OS will load. To unlock the screen
(its locked to avoid accidentally pressing buttons when not being used) tap
and hold the padlock icon then slide it to the edge of the circle. The eTouch™
will then load you home screen for you to start navigating
to your chosen function. The screen will automatically
lock after a period of non-use (you can change the length of
this time period in the Settings menu)

To turn your Tablet OFF simply press and hold the Power
button for about 2 second and the ‘power o screen’ will
appear. Tap Power O then OK and the eTouch will power o.

7” LCD Touchscreen

LED Backlit, Capacitive Touch

Speaker

Back Button

miniUSB A (PC Link only)

miniUSB B (Keyboard,

Mouse, USB Storage)

Power Button (Standby)

Press for 10 seconds for hard reset
(Does not harm user data)

Volume + / -

Camera

About your Home Screen

Your Tablet’s home screens let you personalise your working environment to
suit your lifestyle. For example you can set up one screen with your favourite
apps on it, another screen with widgets to your favourite social networking
sites and another page with shortcuts to your work les.
To access your other home screens you can simply touch the screen and swipe
it left or right.

To add a widget or shortcut just ‘tap and hold’ some blank space on your
home screen. A pop-up menu will appear so you can choose your widget
which will appear on the home screen. To move it around the home screen tap
and hold the icon until it becomes larger, then drag it to where you want it.

To delete a widget or shortcut, tap and hold the icon then drag it to the
recycle bin. The recycle bin icon appears in your program menu on the top of
the screen.

You can also add apps to any home screen by pressing the + icon top right. A
preview of all screens will display just tap and hold an app and drag to the
home screen required.

Setting the Time
& Date

Some of the eTouch™’s software
and widgets require the date and
time to be correct to function
correctly. To set the time and date
go to Settings > Date & time.
Uncheck the Automatic setting
then click Set Date, use the + and ­buttons to change the date and
then press Set. Click Set Time, use
the + and - buttons to change the
date and then press Set.

Please Note: If you run out of
battery life you will lose your time
and date settings.