Elo E796382 Quick Start Guide

75mm mounting interface

Power Button Micro USB connection Serial Number

Quick Installation Guide

0702L Touchmonitor

Elo Touch Solutions Technical Support

Online self-help: www.elotouch.com/support

North America

800-ELO-TOUCH
Tel [phone]
Fax [phone]
[e-mail]

Europe

Tel [phone]
Fax [phone]
[e-mail]

The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no
representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a
particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation
of Elo to notify any person of such revisions or changes.

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer
language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior
written permission of Elo Touch Solutions, Inc.

Elo and the Elo logo are either trademarks or registered trademarks of Elo Touch Solutions, Inc..

© 2019 Elo Touch Solutions, Inc. All rights reserved.

Asia-Pacific

Tel [phone]
Fax [phone]
[e-mail]

Latin America

Tel [phone]
[e-mail]

www.elotouch.com

Revision A

P/N E915161

1

Download and install the latest DisplayLink
drivers at www.elotouch.com/support.

Note: DisplayLink driver installation requires
another display to be functioning during
driver installation because the 0702L will not
function without the drivers installed.

4

75mm

75mm

Monitor can be mounted to any standard
75mm x 75mm VESA mounting bracket
using four M4x8mm screws.

Connect the micro USB cable. Ensure the

2

3

rubber gasket (red) is all the way inside the
cable cover area.

Install the cable cover by installing the top

side rst and rotating it down. Secure the door

with the M3 screw included.

5

AUX Power Connector

Data Connector

Connect the Data Connector of the Y-Cable to the host PC USB port.
Note: Some computers also require connecting the AUX Power
connector to the host PC.

Go to www.elotouch.com/support to download user manual.

请访问www.elotouch.com.cn 获取用户手册 请保留备用