Elo E732416 Quick Start Guide

Elo Touch Solutions Technical Support

Online self-help: www.elotouch.com/go/websupport

Technical Support contacts in your region:

www.elotouch.com/go/contactsupport

www.elotouch.com

Quick Installation Guide

Wallmount for ESYXX AiO

Touchcomputer

Revision A

P/N E148959

North America

Elo Touch Solutions
1033 McCarthy Boulevard
Milpitas, CA 95035

800-ELO-TOUCH
Tel [phone]
Fax [phone]
[e-mail]

The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Afliates (collectively “Elo”) makes no
representations or warranties with respect to the contents herein, and specically disclaims any implied warranties of merchantability or tness
for a particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without
obligation of Elo to notify any person of such revisions or changes.

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer
language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior

written permission of Elo Touch Solutions, Inc.

Elo (logo) and Elo Touch Solutions are trademarks of Elo and its Afliates.

© 2014 Elo Touch Solutions, Inc. All rights reserved.

Europe

Tel [phone]
Fax [phone]

[e-mail]

Asia-Pacic

Tel [phone]
Fax [phone]

www.elotouch.com.cn

Latin America

Tel [phone]
Fax [phone]
www.elotouch.com

Installation

For more detailed dimensional information, please refer to the AiO or monitor dimensional

Please go to www.elotouch.com/support to verify you have the latest drivers before installing this device.

drawings at www.elotouch.com

Mount the wall bracket to the wall using 6 fasteners
appropriate for the type of wall structure following all
applicable building code standards.

Attach the other bracket to the AiO system or monitor
using the 4 M4 screws included in the kit.

Hang the AiO on the wall bracket and secure using 2 M3
screws included with the kit on the left and right side of
the bracket.