Elo E732416 User Manual
USER MANUAL
Elo Touch Solutions
15.6” Widescreen E-Series RevC All-in-One Touchcomputer
SW602266 Rev B
Copyright © 2017 Elo Touch Solutions, Inc. All Rights Reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language or computer language, in any form or by any means, including, but not
limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of
Elo Touch Solutions, Inc.
Disclaimer
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its
Affiliates (collectively "Elo") makes no representations or warranties with respect to the contents herein,
and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo
reserves the right to revise this publication and to make changes from time to time in the content hereof
without obligation of Elo to notify any person of such revisions or changes.
Trademark Acknowledgments
AccuTouch, CarrollTouch, Elo, Elo (logo), Elo Touch, Elo Touch Solutions, Elo TouchSystems,
IntelliTouch, iTouch, SecureTouch, TouchTools and VuPoint are trademarks of Elo and its Affiliates.
Windows is a trademark of Microsoft Corporation.
Table of Contents
Chapter 1: Setup ..................................................................................... 4
Unpacking Your Touchcomputer ................................................................................................4
Adjusting the Display ....................................................................................................................5
Calibrating the Touchscreen .......................................................................................................6
Additional Extended Cable Cover for Your System .................................................................7
Additional Mounting Option for Your System ............................................................................8
Chapter 2: Operation .............................................................................. 9
Elo Touch Solutions – E-Series Hardware Monitoring Utility .................................................9
LED Functionality ........................................................................................................................10
Accessing the Input/Output Panel ............................................................................................11
Setting Up the Operating System .............................................................................................12
Creating the Recovery Flash Drive ..........................................................................................16
Recovering the Operating System ...........................................................................................19
Chapter 3: Safety and Maintenance .................................................... 23
Safety ............................................................................................................................................23
Care and Handling ......................................................................................................................24
Chapter 4: Technical Support .............................................................. 26
Technical Assistance ..................................................................................................................26
Chapter 5: REGULATORY INFORMATION .......................................... 27
I. Electrical Safety Information ..............................................................................................27
II. Emissions and Immunity Information ................................................................................27
III. Agency Certifications ...................................................................................................29
IV. China RoHS ...................................................................................................................30
Chapter 6: WARRANTY INFORMATION .............................................. 31
This chapter discusses how to set up and test your touchcomputer.
Touchcomputer
Quick Install Guide
Power Adapter
Extended Cable Cover
Unpacking Your Touchcomputer
Check that the following items are present and in good condition:
C H A P T E R
1
SETUP
Power cable US/Canada Power cable Europe
User Guide – E-Series AiO Touchcomputer
SW602266 Rev B, Page 4 of 32
Adjusting the Display
17°
75°
-17°
+75°
The display screen can be adjusted from -17 to +75 degrees, as shown below.
CAUTION: To prevent tipping or dropping, be sure to hold the base when
adjusting the display.
User Guide – E-Series AiO Touchcomputer
SW602266 Rev B, Page 5 of 32
Calibrating the Touchscreen
The touchscreen is pre-calibrated for accurate touch response.
If for any reason the touchscreen needs to be recalibrated, please double-click
the EloConfig shortcut on the system desktop (for Windows 7 & 8.1) and then
click “Calibrate Touch Screens”.
This launches the calibration program. The window shown below opens. Follow
the instructions to calibrate the touchscreen.
User Guide – E-Series AiO Touchcomputer
SW602266 Rev B, Page 6 of 32
Additional Extended Cable Cover for Your System
E-Series RevC provides an additional extended cable cover in the accessory box.
You may need to replace the original cable cover to the extended cable cover if
most of I/O ports have been connected.
User Guide – E-Series AiO Touchcomputer
SW602266 Rev B, Page 7 of 32
Additional Mounting Option for Your System
REMOVE SCREWS TO
REMOVE FOOT PLATE
1) Mounting on the wall
2) Second monitor mount onto your system (any monitor under 2.5 Kg with 75mm
VESA mount)
User Guide – E-Series AiO Touchcomputer
SW602266 Rev B, Page 8 of 32
C H A P T E R
2
OPERATION
This chapter describes how to interact with the Elo Touch Solutions diagnostic
tool, power LED, and input/output panel.
Elo Touch Solutions – E-Series Hardware Monitoring Utility
E-Series Hardware Monitor Menu
User Guide – E-Series AiO Touchcomputer
SW602266 Rev B, Page 9 of 32
The Hardware Monitor tool provides the following features.
Feature
Description
System
Display the BIOS version, operating system version, Hardware
Control (Volume & Brightness), memory information, and drive
information.
Hardware
Monitor
Monitor the CPU temperature, system temperature, and system
output voltages.
Setting
Set alarms when the CPU temperature, system temperature, and
output voltages that meet the setting criterion.
Alarm
Display the record of all alarms.
About
General information for the E-Series diagnostic tool.
LED Color to Observer
State
Off
No input power — Off mode
Red
Input power present – Off or Hibernation mode
Orange
Input power present — Standby mode S3
Green
Input power present — Power on
LED Functionality
The E-Series base has a LED indicating the state of the touchcomputer. The
table below shows LED state and corresponding color.
User Guide – E-Series AiO Touchcomputer
SW602266 Rev B, Page 10 of 32
Loading...