Elo E441385 Quick Start Guide

Peripheral connections

Ethernet

Peripheral Bay

USB Type A

Contents

1x i-Series All-in-One Touchcomputer
1x US power cable
1x EU power cable
2x Cable cover security screws

www.elotouch.com

Peripheral Bay

Home Button

Power

Button

DC Power In

GPIO

Peripheral Bay

Power Over Ethernet
(P.O.E.) Docking Bay

Micro SD Slot

Micro-HDMI
Out

Peripheral

Bay

Elo Touch Solutions Technical Support

Online self-help:
www.support.elotouch.com

North America

800-ELO-TOUCH
Tel [phone]
Fax [phone]
[e-mail]

Europe

Tel [phone]
Fax [phone]
[e-mail]

Asia-Pacific

Tel [phone]
Fax [phone]
[e-mail]

Latin America

Tel [phone]
Fax [phone]
[e-mail]

Quick Installation Guide

I-Series Android All-In-One

Revision A

P/N E214477

The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no
representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a
particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation
of Elo to notify any person of such revisions or changes.

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer
language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior
written permission of Elo Touch Solutions, Inc.

Elo (logo) and Elo Touch Solutions are trademarks of Elo and its Affiliates.

© 2017 Elo Touch Solutions, Inc. All rights reserved.

Go to www.elotouch.com/support to download user manual.

1 3 5

Serial
Number

Remove the left side cable cover by lifting upward

2 4

Connect the power cable. The system will power on automatically
when plugged in. A tie-wrap can be used to secure the power cable
from accidental removal.

The system must be connected to a network for software setup.
Connect an Ethernet cable now or setup WiFi in step 5. Note the
device serial number for use in step 6.

The device is now ready to mount in your environment. A selection of desk,
shelf, and wall mount options is available at www.elotouch.com

After powering on the I-Series Display, the Network screen on the control
panel will appear if no wired connection is found. Set up your wireless network.
Note: The control panel can be opened any time by pressing the HOME and
POWER keys simultaneously, and typing in a password. The default password
is 1elo.

6

To add your device to your EloView account, go to the EloView web portal at
manage.eloview.com. After logging in, go to the ‘Devices’ page, then click the
‘add device’ button. Enter the device serial number and a name for the device.
Click ‘done’. Your device is now linked to your EloView account and will play
the assigned content in safe kiosk mode. You can also pre-set your devices in
your account. Visit www.eloview.com for details.