Elmo HS-G1, HS-G2, HS-G3, Huddle Space HS-G1, Huddle Space HS-G3 Instruction Manual

...
ELMO Huddle Space
HS-G1/HS-G2/HS-G3
Please read this instruction manual carefully before using this product.
2
IMPORTANT SAFEGUARDS
Read Instructions All the safety and operating instructions should be read before the appliance is operated.
Retain Instructions The safety and operating instructions should be retained for future reference.
Heed Warnings All warnings on the product and in the operating instructions should be adhered to.
Follow Instructions All operating and use instructions should be followed.
Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
Attachments Do not use attachments not recommended by the product manufacturer as they may cause
hazards.
Water and Moisture Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool, and the like. The connector of this unit and the USB cable into the water or foreign matter, or not wet. This could cause a fire or electric shock.
Placement Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product
may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold
with the product. Any mounting of the product should follow the manufacturer’s instructions,
and should use a mounting accessory recommended by the manufacturer.
Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
Power Sources
This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
3
Grounding or Polarization
This product may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug, a plug having a third (grounding) pin. The 2-wire polarized plug will outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. The 3-wire grounding type plug will fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.
Power-Cord Protection
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
Lightning
For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
Overloading
Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
A product and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the product and cart combination to overturn.
Object and Liquid Entry
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
Servicing Do not attempt to service this product yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
• When the power-supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
4
• If the product has been dropped or damaged in any way
• When the product exhibits a distinct change in performance - this indicates a need for
service.
Replacement Parts When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
Safety Check Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
Heat The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that produce heat.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltagewithin the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature
SA 1966
SA 1965
5
FOR UNITED STATES USERS: INFORMATION
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of waste electrical and electronic equipment in the EU countries. Please do not throw the equipment into the domestic refuse. Please use the return and collection systems available in your country for the disposal of this product.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
This symbol [crossed-out wheeled bin Directive 2006/66/EC Annex II] indicates separate collection of waste batteries in the EU countries. Please do not throw the batteries into the domestic refuse. Please use the return and collection systems available in your country for the disposal of the waste batteries.
WARNING:
Handling the cord on this product or cords associated with accessories sold with this product, will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Wash hands after handling.
THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER MAY BE REQUIRED TO TAKE ADEQUATE MEASURES.
6
BEFORE YOU USE
Power Supply
Be sure to use the power cable and AC adapter that come with the product.
The power cable and AC adapter that come with the product are for the product only. Do
not use them with another product.
Be sure to use the AC adapter applicable to your local power specifications. If the product
was sold in Japan, use the AC adapter sold with the product with 100 VAC and 50 or 60 Hz.
Installation
Do not place this product in any humid, dusty, salt bearing wind, or vibrating locations. Use it under the following environmental conditions:
Temperature: 0°C - 40°C Humidity: 30% - 85% (No condensation)
Follow the guidelines below to prevent the unit from dropping or overturning.
• Use the product on a stable base, desk, or table. Do not place the product on an
unstable base or slanted location.
• Place or wire the product to prevent the cables such as power cable and AC adapter
cable from pulling.
Storage and Maintenance
Make sure to turn off the power of the product before cleaning. Use a soft, dry cloth for
cleaning. Do not use any volatile solvent such as thinner or benzene.
When storing the product, do not leave it under direct sunlight or by heaters.
It may be discolored, deformed, or damaged.
Battery
Remove the battery from the remote control when not in use for an extended period of
time.
Do not use a rechargeable battery.
Do not charge or short-circuit the battery.
Follow the regulations of the city or town when disposing of the battery.
Pay attention to the polarity (+ / - ) of the battery.
Children may ingest small batteries; always keep batteries safe and out of reach.
If a battery is swallowed, consult a doctor immediately as this could result in asphyxiation or be an obstacle to digestion, etc.
If any liquid from a battery leaks onto your skin or clothes, flush the area with clean water
immediately. If it gets into your eye, flush immediately with clean water and then contact a doctor.
A battery is used for the internal clock. When you need to replace the battery, contact the
dealer from whom you purchased this product.
7
Other Precautions
Do not open the cover of the product or disassemble the product. Doing so may cause
malfunction.
Carry the product by holding the lower part of the main unit in both hands.
Do not wrap the cable tightly during use, otherwise the cable may be broken.
Save a backup copy before switching HDMI devices. Malfunction of the product may
occur due to a problem while switching the devices.
If the product is used for longer than the warranty period, its performance and quality may
deteriorate due to the lifetime of its parts. For parts replacement (on chargeable basis), consult the dealer from whom you purchased the product or our branch/office near your location.
ELMO shall not be liable for any loss of data or program occurred during the use of the
product.
This product is designed to be used with the normal HDMI devices. It is not designed to be
used for the applications which require high-level reliability and security.
There may be unexpected compatibility problems when different devices of different
manufacturers are connected to the product. Also, the full performance of the devices may not be obtained when multiple devices are connected.
About features
Functions and features may vary depending on the models. Some setting items or functions are not available with some models.
Copyright
Unless used for personal use, it is prohibited strictly under copyright law to use any data recorded using the product without the prior consent of the copyright holder. Even if using for personal use, be careful that there could be a situation where recording is restricted or illegal.
The contents of this document are subject to change without notice.
The latest version can be obtained from the following official website:
http://www.elmousa.com/ http://www.elmoeurope.com/
It is prohibited under copyright law to use or copy any part or the whole of this document
without our prior written consent.
ELMO shall not be liable for any claim for damage or loss of earnings or any claim raised
by a third person due to the use, malfunction or repair of this product.
Recording / Playback
We recommend that you make a test recording and playback before the actual
recording to ensure the normal video and audio recording operations.
When the recording time becomes too long, the video file may be divided into multiple
files.
Microphone
Connecting a microphone other than an electret condenser microphone (a microphone for
a computer) may cause malfunction.
8
TABLE OF CONTENTS
IMPORTANT SAFEGUARDS ·························································································································· 2
BEFORE YOU USE ···················································································································································· 6
TABLE OF CONTENTS ····································································································································· 8
PACKAGE CONTENTS ····································································································································· 9
FEATURE COMPARISON BY MODEL ······································································································· 10
INTERFACE AND FUNCTIONS ··········································································· 10
LED ············································································································· 11
THE NAME OF EACH PART ··························································································································· 12
BASIC OPERATIONS ········································································································································· 16
CONNECTING THE INPUT CABLE TO THE PRODUCT ············································· 16
CONNECTING THE OUTPUT CABLE TO THE PRODUCT ········································· 16
TURNING ON/OFF THE POWER ········································································· 16
SWITCHING THE DISPLAYED IMAGE ······································································································· 17
SWITCHING THE INPUT SOURCE ······································································· 17
REMOTE CONTROL ························································································ 17
RECORDING FEATURE ···································································································································· 19
RECORDING TO THE SD CARD ········································································· 19
RECORDING PROCEDURES ·············································································· 20
OTHER FEATURES ············································································································································· 21
REAL TIME CLOCK FUNCTION ·········································································· 21
VIEWING FILES IN THE SD CARD ON A COMPUTER ··············································· 21
CONNECTING A COMMERCIALLY AVAILABLE HDBaseT DEVICE ······························ 22
BATTERY FOR THE HUDDLE SPACEOPTION ···················································· 22
TROUBLE SHOOTING ······································································································································· 23
SYMPTOMS AND SOLUTIONS ··········································································· 23
SPECIFICATIONS ················································································································································ 25
GENERAL ····································································································· 25
RESOLUTION / FRAMERATE ············································································ 26
TRADEMARKS AND LICENSES ·········································································· 27
9
PACKAGE CONTENTS
The items below are included with the product. If any item is missing, contact the dealer from whom you purchased this product. The items included vary depending on the model. Note in advance that some items may not be included depending on the model.
AC power cableblack
AC adapter
Battery CR2025 (for remote control) For HS-G2/HS-G3 only
Huddle Space
USB cablegray For HS-G2/HS-G3 only
Warranty Card (For Japan/ North America only
Quick Start Guide
HDMI cable (TYPE A-micro) 1m) 2pcs
Quick
Start
Guide
Warranty Card
IR wireless remote control For HS-G2/HS-G3 only
By destination shape is different
HDMI cable (TYPE A-TYPE A) 1m) 2pcs
⑨ ⑧ ⑦
Loading...
+ 19 hidden pages