Elmo Digital Camera User Manual

How to Use the Elmo (document camera)

1. Turn on Elmo – The power switch is located on the left rear side of the base.

2. Turn on Infocus Projector (ceiling mounted) – Point the Infocus remote at the
front of the projector and press the light blue power button located in the
upper left corner of the remote.

3. Put something on the Elmo base.

4. Press the button marked Internal located on the front of the Elmo base under
Input.

5. If there is still no image being projected point the Infocus remote at the
projector and press the VIDEO button. It is the middle button in the row of
buttons directly below the power button.

Using Slides/Transparencies with Elmo

1. Place slide/transparency on Elmo Base.

2. Turn on Base Lamp – Press the button labeled Base under Lamp on the front
of the Elmo Base.

3. Adjust Zoom – Zoom in or out using the TELE and WIDE buttons under
Zoom on the front of the Elmo Base.

4. To Adjust focus you can use the manual focus by pressing the N or F button
under Focus on the front of the Elmo Base or you can press the AUTO button
to the right of the F button and Elmo will automatically focus the image for
you.

Using Books, Notes, or 3-D Objects with Elmo

1. Place item on Elmo Base.

2. Turn on upper lamp – Press the button labeled Upper under Lamp on the front
of the Elmo Base.

3. Adjust lamps for best light.

4. Adjust Zoom and Focus as above.

Using the Digital Slide Converter ( Elmo TRV-35H )

1. Put Slide Carrousel on the Slide Converter.

2. Turn on Slide Converter – Power switch is located on the front left corner
above the power cord.

3. Turn on Elmo if it isn’t already on.

4. Press AV1 under Input.

5. Turn on the Infocus projector.

6. Press the FWD button on top next to Carrousel to advance to the first slide.

7. If there is still no image being projected point the Infocus remote at the
projector and press the VIDEO button. It is the middle button in the row of
buttons directly below the power button.

8. The Focus and Zoom buttons are located on the front right side of the slide
converter.

9. To remove carrousel press the select button to the left of the carrousel and
remove as with a standard slide projector.

Viewing VHS and Laserdiscs

1. Turn on Elmo.

2. Select AV2 located under Input on the Elmo Base.

3. Turn on Projector.

4. Turn on Either the VCR or the Laserdisc Player. ( DO NOT TURN ON
BOTH OF THEM TOGETHER. When they are both on the projected
image is distorted by static. )

5. Turn on the AIWA Tuner ( In C2 the Tuner is SONY instead of AIWA ).

6. Press button labeled Video 1/5.1 ch.

7. Insert your VHS tape or Laserdisc and press play.

8. Adjust volume on the Tuner – Master volume control is a big round knob on
the right side.