Elko RF Touch-B, RF Touch-W User Manual

WIRELESS TOUCH
CONTROL UNIT

USER'S MANUAL

RF Touch user manual

We want to thank you for your purchase of the RF Touch control unit, which is an element of
wireless RF Control system.

RF Touch allows:

you to control many devices trough touch screen

- heating control

- dimming lights

- switching of electrical appliances and equipment

- blinds

- a combination of detectors

- function timers

- Group control of electrical equipment
everything with clear visualization
wireless communication without the need for cabling

2

E
N

RF Touch user manual

Before you start

The instruction manual is intended for installation and use of the equipment. Instructions are always included in the product packaging.
Installation and connection can only make personnel with appropriate qualifications, in compliance with all applicable laws, who are
perfectly familiar with this instructions and functions. Trouble free function is also dependent on transportation, storage and handling.
In case of any signs of damage, deformation, malfunction or missing parts, do not install this product and return it to the seller.
Product and its parts must be at the end of its lifetime handled as electronic waste. Before installation, make sure that all wires, connected
parts or terminals are not live. During the installation and maintenance is necessary to follow safety regulations, standards, guidelines
and special provisions for working with electrical equipment.

Contents:

Before you start .......................

Overview of wireless devices ...

Characteristics of RF Touch .....

Technical speci cations ...........

Installation of RF-Touch W .......

RF Touch Installation-B ............

Description of Control icons ....

Basic Steps ...............................

Settings

- Default setting .........................

- Menu(creating and naming) ...

- Programming ...........................

- Assign a new receivers .......

- Assigned receiver ...............

- Detectors ............................

- Quick Control .....................

- Display .....................................

- Other ........................................

Control

- Temperature regulation ..........

- Switching .................................

- Dimming ..................................

- Blinds .......................................

- Detectors .................................

- Quick control............................

What to do if ............................

Installation Form .....................

3

4

7

8

9

10

11

12

13
14
16
17
18
21
23
24
24

26
30
33
36
38
39

40

42

3

JA-80P
JA-81M
JA-82M

Overview of wireless RF Control devices

RFWB-20/G

2-channel wireless
switch in the design
LOGUS

90

RFWB-40/G

4-channel Wireless
switch in the design
LOGUS

90

RFJA-12B/230V

blind actuator
2 x 8A switching
relay protection
230V AC

RFJA-12B/24V DC

blind actuator
contactless switching
12-24V DC

RFDAC-71B

actuator with analog
output 0 (1) - 10 V
1 x switch contact 16 A
7 functions, 230V AC

Thermo-control

of heating valves
supplied on request
with the product RFDAC-71B

Dimmable ballast

for dimming of  uorescent
lamps
supplied on request
with the product RFDAC-71B

RF KEY

4-channel remote
controller - key pendant

RFIM-20B

universal transmitter module
under the switch or button
wall box installation

RFIM-40B

universal transmitter module
under the switch or button
wall box installation

RFSG-1M

Transmitting module
1-module
230 V AC

RF Touch-W

for surface mounting
100 - 230V AC or
adapter (external)
12 V DC

RF Touch-B

for mounting
in the installation
box
100 - 230V AC

All actuators of the RF Control
System can be controlled by
wireless central unit and all
transmitters of the system
simultaneously.

DETECTORSANALOGUE ACTUATOR

RF Control system CENTRAL WIRELESS UNIT

TRANSMITTERS

BLIND ACTUATORS

RF Pilot

remote controller,
colours: white,
anthracite

CONTROLLER

4

E
N

Overview of wireless RF Control devices

RFSA-11B

single channel
single function
switching actuator
1 x switching
contact 16 A
230V AC

RFSA-61B

single channel
multifunction
switching actuator
1 x switching
contact 16A
230V AC

RFSAI-61B

single-channel
multi-function
switching actuator
with option of
connecting an
external wired
controller

RFSA-62B

2 channel
multifunction
switching actuator
2 x 8A switching
contact
6 functions
230V AC

RFUS-11

single-channel
single-function
switching actuator
1 x switching 16A
230V AC,
protection IP65

RFUS-61

single-channel
multi-function
switching actuator
1 x switching 16A
230V AC,
protection IP65

RFSA-61M

single channel
Multifunction
switching actuator
1x changeover
contact 16 A
6 functions
230V AC

RFSC-11

RFSC-11 single­channel, single­function switched
socket
1 x switching 16A
230V AC

RFSA-66M

six-channel
Multifunction
switching actuator
3 x 8 AND NO
3 x changeover
contact 8A
6 functions 230V AC

RFSC-61

single-channel,
multifunction
switched socket
6 functions
1 x switching 16A
230V AC

Angle antenna

for plastic
switchboards
supplied as standard
for RFSA-61M,
FSA-66M, RFSG-1M

Angle Antenna

for metal
switchboard
can be ordered for
RFSA-61M,
RFSA-66M, RFSG-1M

SWITCHING ACTUATORS

5

RFSTI-11B

wireless switching actuator
with temperature sensor
in design to installation box,
230V AC

RFSTI-11/G

wireless switching actuator
with temperature sensor
with manual
control buttons directly
on the unit, 230V AC

RFTI-10B

wireless temperature sensor
1 x CR 2477 3V battery

RFTC-10/G

digital temperature
controller
2 x 1.5V AAA batteries

TEMPERATURE ACTUATOR

Overview of wireless RF Control devices

RFDA-11B

single function
dimming actuator
1 light scene,
function OFF, 230V AC

RFDSC-11

single-function dimmed
socket
1 lighting scene
function OFF, 230V AC

RFDEL-71B

multifunction dimming
actuator
7 functions, 230 V AC /
250VA
Dimmed load: R, L, C,
LED, ESL

RFDA-73M/RGB

used to dim LED strips and
RGB LED strips, possible
other LED loads

RFDA-71B

multifunctional dimming actuator
7 functions,
AC 230V / 250V

RFDSC-71

multifunction dimmed socket
7 functions,
230 V AC / 250VA

DIMMING ACTUATORS

RFATV-1

measures the temperature in
the given zone and provides
wireless control of the radiator
(heater) valve

6

E
N

Characteristics of RF Touch

Control Unit of the wireless system RF Control - RF Touch provides intelligent control of the RF units.

It can be used for:

Central control of all units from one place
Complete overview (visualization) of the current status of units (appliances / equipment)

Features:

sends command to temperature, switching, dimming and shutter actuators
accepts commands from the transmitters, actuators, temperature sensors and detectors
processing programs for heating and regulation

Design:

RF Touch-B  ts in the round installation box with a supply voltage of 100 - 230 V AC
RF Touch-W for surface mounting with power supply from the back side: 100 - 230 V AC or from the side (via jack):

12 V DC

3.5 inch color touch screen - no mechanical buttons
RF Touch frames in the base plastic (white, black) or luxurious design Logus90 (glass, metal)
Color of the interframes - white, ivory, ice, mother of pearl, aluminum, silver
Colors of the boxes (only for RF touch-W) - white, ivory, dark gray, light gray

Backup time in case of power failure is 48 hours
40 actuators and 30 OASIS detectors can be assigned to each RF Touch unit

RF Touch can be combined with units of RF Control marked as Oasis & Touch Compatible

7

Technical parameters

RF Touch-B RF Touch-W

Connection

push-in

screwless terminal

push-in or jack

2.1 mm

Max. cross section of wires: max. 2.5 mm

2

/ 1.5 mm2 with socket

Operating conditions

Operating temperature: 0 ... +50°C

Storage temperature: - 20 ... +70°C

Protection: IP 20

Overvoltage category: III.

Pollution degree: 2

Operating position: arbitrary

Installation: installatin a box wall box installation

Dimensions: 94 x 94 x 12 mm 94 x 94 x 24 mm

Weight **: 127 g 175 g

Standards: EN 60730-1

* adapter is included for RF Touch-W

** weight with plastic frame

Technical parameters

RF Touch-B RF Touch-W

Display

Type: color TFT LCD

Resolution: 320 x 240 pixels / 262,144 colors

Aspect ratio: 3 : 4

Visible area: 52.5 x 70 mm

Backlight: active (white LED)

Touch screen: resistive 4-wire

Display: 3.5”

Control: Touch sensitive

Power supply

Voltage /
speci c current:

100 - 230 V AC

from the back side

100 - 230 V AC

from the side 12 DC *

Power consumption: max. 5 W

Power supply connector: A1 - A2

Control

Range up to: 100 m

Minimal range
RF Touch – actuator: 1 m

Frequency: 868 MHz

Technical specifications

8

A1
100 - 230V AC
A2

E
N

RF Touch-W

adapter included with RFTouch-W

POWER SUPPLY OVER ADAPTERPOWER SUPPLY OVER TERMINALS

FITTING ON THE SURFACE

9

A2
AC 230V
A1

RF Touch-B

FITTING TO THE INSTALLATION BOXPOWER SUPPLY OVER TERMINALS

10

OK

.

abc

A/a

_

a/1

OK

C

OK

0-10V

E
N

Description of Control Icons

RF Touch version Information
and number of assigned units

settings

back to the home screen

step back

delete

name/adressof the actor(s)

Basic

add

edit/remove

scroll up

scroll down

con rm

Setup Menu

yes/selected

no/not selected

con rm

dot

letters

small/capital letters

space

switch - the letters / numbers

Temperature regulation

Switching

Dimming

Blinds

Detectors

Quick kontrol

Main menu

erase previous

Keyboard

temperature

Switching

impuls

button

time function

- delayed switch on

- delayed switch o

Heating

switch ON

switch OFF

switch ON

switch OFF

dimming

light inclination

light declination

Dimming

lower blinds

rise blinds

Blinds

con rm

regulation

11













 

Basic Steps for Successful Programming

Keep in mind that the radio signal range of RF installation
depends ON building construction, materials and placing of all
units.

1st Step – Placing of the RF Touch and RF units

- device name that you want to manage (to create a menu)

- the names of units (for the correct classification of the
group, for example: RFSA-61B)- addresses of units (to
identify the actuator, for example: 577515)
Installation form can be found at the end of this manual.

2nd Step - Fill Installation Form

Name

Adress

Create a list of names of the controlled device in the
Settings / Menu (create name).

3nd Step - Set menus (create names)

Programming of the RF units with RF Touch is carried out in
the Settings / Programming menu.

4rd Step – Programming

brick wall

60-90 %

Wooden structures

with plasterboard

plates

80-95 %

reinforced concrete

20-60 %

metal plates

0-10 %

standard glass

80-90 %

E.g. RFSA-61B

E.g. 577515

Transmission of radio-frequency signals through various materials.

12

E
N

fig. 1

fig

. 1

fig. 4

fig. 4

fig. 6

fig. 6

fig. 7

fig. 7

fig. 8

fig. 8

Settings (Fig.7-8):

Date and Time

automatic
transition between
winter / summer
time (for time
Zone GTM +01:00)

Format settings
hours (12h / 24h
mode)
To save Settings
press OK.

Date and time

SETUP

Selection of required
Language - Figure 6.
Save setting by
pressing OK.

Language

The settings menu can be opened by touch in the upper
right corner screen on the symbol

by

to

and insertion of
password (it´s setting from production – 1111) ( g. 4-6),
which you can change

everywhen.

Main Menu / Settings

When the RF Touch is switched on for the  rst time, you will be automatically redirected to the display calib­ration screen. Touch screen can be controlled by the light touch (of about0.5-1s) in the desired location. On the
screen (Fig. 1) then appears cross in each corner of the screen, which need to be pressed twice. This will calibrate
the device. The display then shows the RF logo icon

and then touch icon signalizing scanning of the actuators.

Initial setup

date
time (touch in the upper right corner of the display will switch between analog

- digital clocks (Figure 2 - Figure 3)

display at the bottom of the screen is customable, eg: heating mode, a often used device ...
Touch the clock area to enter the Main menu. If you want to get to the main menu from
sleep mode, you need to touch the screen anywhere.

Content of the main screen

fig. 2

fig. 2

fig. 3

fig. 3

fig. 2

fig. 2

fig. 5

fig. 5

13

SETUP

fig. 1

fig. 1

fig. 2

fig. 2

fig. 3

fig. 3

fig. 4

fig. 4

fig. 5

fig. 5

Note: Actuator RFTI-10B can be connected with two temperature sensors. For each sensor, you can create your own name.

Press the Add icon (Fig. 2) to show a selection of sections (Fig. 3):

Temperature regulation Dimming Blinds Switching Control Speed Detectors

Choose the section where you want to add the device name and type your own text (max. 20 characters).

Example 1: If you want to control the blinds - Place the name to the section of the blinds (Fig.3-5).
Example 2: If you want to control a group of blinds together, first create all the blinds names in the blinds section and then create new name for group control in Quick
control section.

Menu (create name) / Add

Menu (create name) is used to add, edit or remove the names of the controlled device. In this menu (Figure 1) you need to first
create your own device names for the sections you want to control.
Creating names is important for successful programming of the RF Touch. For each actuator, which is involved in the installation
you have to create unique name.

The content of this menu is not set at the factory.

Menu (create name)

14