Elkay LKAV4091CR Installation Manual
LKAV4091 LKEC2091
INCLUDES:
INSTALLATION / OWNER'S MANUAL
WALL MOUNT POTFILLER
LKAV4091 AND LKEC2091
3.2mm hex allen wrench
2.5mm hex allen wrench
RECOMMENDED TOOLS:
Wrench
Pencil
Screwdriver
Sealant Tape
SAVE FOR CONSUMER
Drill
WARNING: Please carefully read and properly follow the instructions for installation found in this manual.
STEPS:
1
3/8"-1/2"
1.Shut off water supplies.
Install the supply piping so that the 1/2" threaded
connection protrudes approximately 1/2" beyond the
finished wall.
2
2.Install the mounting bracket (1) onto the finished wall.
Screw the faucet onto the supply tubing and mark the
locations for the support screws with a pencil (2).
Caution: When marking the location for the mounting
bracket screws, be sure that the screws will not
interfere with or come in contact with water will not
supply piping that is concealed behind the wall.
2
1
3.Remove the faucet and drill four holes on the positions
marked in step 3.
2
3
5.Wrap thread sealant tape around the threads of the
supply pipe. Install the gasket (1) and the mounting
bracket (2) using the 4 screws (3) provided.
1
4.Insert anchors (1) into holes (2) and tap flush with
wall.
6.Place flange (1) onto the faucet as shown. Thread
faucet onto pipe. Use cloth to protect finish. Tighten
securely, but do not overtighten.
Loading...