Elkay LKA2475LF Installation Manual

INSTALLATION / OWNER'S MANUAL

Single Handle Bar Faucet

Model # LKA2475LF

Groove joint pliers Wrench

SAVE FOR CONSUMER

(2) 1/2 in Supply Lines

Sealant Tape

Plumber's Putty

WARNING: Please carefully read and properly follow the instructions for installation found in this manual.

STEPS:

Place faucet in position on sink. From
under sink, threads mounting nuts onto
faucet. Tighten mounting nuts. Hand
tighten only.

1

(A)

Make connections to water lines.
Use 1/2" I.P.S. faucet connections (1)
or use supplied coupling nuts (3)
with 3/8" O.D.ball-nose riser(2).
Use wrenches to tighten connections.
Do not overtighten.

1

2

2

3

(B)

Important: After installation is
completed, remove aerator. Turn on
hot and cold water supplies. Turn
handle to full open position for one
minute. Check for leaks. Replace
aerator.

CARTRIDGE REPLACEMENT

1

3

Shut off water supply. With valves in "closed" position,
remove index (1) from han dle (3). Loosen the screw (2)
and remove handle (3).

2

3

Loosen cartridge nut (1) by turning it

counter-clockwise and lift out the cartridge (2) and
disc & spring (3). Insert new cartridge and disc &
spring. Reinstall the handle.