I
A
P
M
O
U
P
C
F
O
U
N
D
E
D
1
9
2
6
Model ILR6622DD4 Illustrated
22"
16"
7-5/8"
4" 4" 4"
66"
32-3/8" 32-3/8"
16-3/8"
16" 16"
16-3/8"
1-1/4"
17-1/4"
1-3/4"R
Lustertone®Sink-ette®Double Bowl Sink
with Double Drainboard
Model ILR6622DD
SPECIFICATIONS
GENERAL
ILR6622DD drop-in sink-ette with drainboard on left and right
of sink bowls. The ideal solution to where to place a hot pot!
Highest quality Lustertone sink bowls and integral fan pitched
drainboard seamlessly drawn of #18 gauge, type 304 (18-8)
nickel bearing stainless steel. Self-rimming.
DESIGN FEATURES
Bowl Depth: 7-5/8".
Coved Corners: 1-3/4" radius.
Finish: Exposed surfaces hand blended to lustrous highlighted
Lustertone satin finish.
Underside: Fully undercoated to prevent condensation and
deaden sound.
OTHER
Drain Opening: 3-1/2".
Note: Unless otherwise specified, sink is furnished with four
faucet holes as illustrated.
Recommended Minimum Sink Base: 36".
OPTIONAL ACCESSORIES
Rinsing Basket: LKRB1611 or LKERBSS.
This sink complies with ANSI Standard A112.19.3M.
This sink is listed by the International Association of
Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
SINK DIMENSIONS (INCHES)*
Cutout in
Countertop
Model
Number L W L W D Length Location L W Holes Lbs.
Overall Inside Each Bowl
Drain
Board Bowl
(11/2" Radius
Corners)
ILR6622DD 66 22 16 16 75/8 163/8 L & R 653/8 213/8 0, 1, 2, 3, 4 or 5 50
*Length is left to right. Width is front to back.
No. of
11/2" Dia. Ship.
Faucet Wt.
Model ILR6622DD4
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
Elkay Manufacturing Company
www.elkay.com
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2001 Elkay Mfg. Co.
(Rev. 7/01) 1-126C