Elkay IAPMO Installation Manual
Replacement parts available
by visiting web site
www.elkayusa.com
ELKAY LIMITED LIFETIME FAUCET WARRANTY
ON RESIDENTIAL FAUCETS
Limited Lifetime Functional and
Finish Warranty
Elkay warrants to the original consumer purchaser that the Elkay faucet purchased will
be free from defects in material and workmanship for as long as the original consumer
purchaser owns the faucet. Elkay will, at its
option, supply replacement parts (or if no
longer available a comparable product) if the
faucet fails due to a defect in material or
workmanship. This warranty does not apply
in the event of product surface damage
caused by abuse, misuse or improper care
and maintenance. This warranty excludes
damage caused by harsh or abrasive cleaners
and/or materials. This warranty excludes all
industrial, commercial and business use,
whose purchasers are hereby extended a
limited lifetime on mechanical parts and 5
not include transportation cost or labor
installation cost. Elkay reserves the right to
examine product in question and its installation prior to replacement.
OTHER WARRANTY CONDITIONS
ON FAUCETS
Our warranty does not cover product failure
or damage caused by abusive treatment,
misuse, environmental factors, improper
care and cleaning, or damage due to handling or faulty installations. This warranty is
extended only to the original consumer purchaser of the product. This warranty does
not cover shipping costs, labor costs, or any
other charges for such items as installation
or replacement of the sink, diagnosis or
replacement of any faucet or component
part, or any other expense or loss.
All incidental or consequential damages
warranties, express or implied are given.
Any implied warranty, including one of
purpose, is limited to the duration of this
written warranty.
Some states do not allow the exclusion or
limitation of incidental or consequential
damages or limitations on how long an
implied warranty lasts, so the above limitations or exclusions may not apply to you.
and you may also have other rights which
vary from state to state.
TO OBTAIN SERVICE
UNDER WARRANTY
1. Write to: Elkay
Attention: Consumer Services
2222 Camden Court
Oak Brook, IL 60523
2. Include a letter containing the following
information:
a. Date of purchase and installation
b. Description of nature of defect
c. Model number or description of model
and/or component part if possible.
How to Install an
Undermount
Two-Handle Faucet
IAPMO
®
Elkay
www.elkayusa.com
2222 Camden Court
Oak Brook, IL 60523
USA
Printed in U.S.A.
©2005 Elkay
P99175 (11/09)
SAVE FOR CONSUMER
ELKAY • 2222 CAMDEN COURT • OAK BROOK, IL 60523 USA
How to Install Faucet Assembly
1. Remove (2) anges from cartridge holders and (1) ange nut from spout
holder or waterway.
SPOUT ASSEMBLY
OPTION A
Plug Button
Handle Screw
Handle
Cartridge
OPTION C
Handle Screw
Handle
Cartridge
HANDLE
SINK DECK
WASHER
WATERWAY
HOT BUTTON
FLANGE
LOCKNUT
SPOUT NUT
SLEEVE
WASHER
FLANGE
TO INSTALL FAUCET
2. From underneath sink, insert waterway assembly up through sink faucet
drillings. From topside, thread ange onto center body. (See Figure 1.) Add
washer and sleeve. Insert spout assembly into sleeve and tighten spout nut.
Begin to unscrew ange until washer is attened against bottom of sleeve.
3. Topside, thread anges to faucet shanks and
TOP OF
CENTER BODY
align faucet.
4. From underneath, tighten (2) faucet locknuts.
5. Install handles (see Figure 2).
6. Connect faucet shanks to hot and cold water
supply tubes. Thread coupling nut onto faucet
THREAD
FLANGE
DOWN TO
2-3/4"
FLANGE
shanks and tighten with wrench.
SINK DECK
7. FLUSH WATER LINES to remove dirt and sediment from water line. Turn on water supply.
FIGURE 1
Unscrew aerator from spout. Turn on HOT and
COLD water (together) for two minutes. Turn
o. Replace aerator.
Elkay recommends installation by a licensed plumber.
OPTION B
Plug Button
Handle Screw
Handle
Capnut
Cartridge
OPTION D
Handle
Screw
Handle
Cartridge
FIGURE 2
1. Insert handle over cartridge stem. Cartridge rotation should be clockwise for
hot and counterclockwise for cold, except for Option A. Option A both cartridges are clockwise.
2. Secure handle screw.
3. Insert plug button if applicable.
TYPICAL WATER SUPPLY HOOK-UPS
FLEXIBLE SINK RISERS WITH
BALL NOSE
Flexible sink risers available
in 3/8" or 1/2" O.D. sizes and
in various lengths wherever
plumbing supplies are sold.
1/2" I.P.S. Shank
3/8" O.D. or
1/2" O.D.
Flexible Supply
Coupling Nut
SLIP JOINT CONNECTION
Use 3/8" O.D. copper tube
of proper length with cone
gasket and washer assembly
as shown. (Wherever plumbing
supplies are sold.)
1/2" I.P.S. Shank
Important: Tube ends
must be ared.
Rubber Gasket
Washers
Coupling Nut
3/8" O.D.
Copper Tube
1/4" TAILPIECE CONNECTION
Coupling nuts furnished
1/4" I.P.S. tailpiece available
wherever plumbing supplies
are sold.
1/2" I.P.S. Shank
1/4" I.P.S. Tailpiece
Coupling Nut
Loading...