Elkay ESE250 User Manual
®
S PECIFICAT I O NS
3
HOLE DRILLING
CONFIGURATIONS
4" 4"
4
4" 4" 4"
Model ESE2504 Illustrated
4" 4"
8-1/8"
14"13-1/2"
33"
2-1/4" R
15-3/4"
22"
15"
3" R
18"
4"
GENERAL
Good quality sink formed of #20 gauge, type 301 nickel bearing stainless steel. Self-rimming.
DESIGN FEATURES
Bowl Depth: 8-1/8".
Coved Corners: 3" vertical radius, 2-1/4" horizontal radius.
owl and Faucet Deck Recess: 3/16” below outside edge of
B
ink.
s
Finish: Bowl surfaces are polished to an ultra radiant finish.
Deck and bowl radius have mirror finish.
Underside: Fully undercoated to dampen sound and prevent
condensation.
OTHER
Drain Opening: 3-1/2".
Note: Unless otherwise specified, sink is furnished with 4 faucet
holes as shown.
This sink does NOT comply with ASME A112.19.3.
OPTIONAL ACCESSORIES
Rinsing Baskets: LKWRB1318SS (large bowl), LKWRB1316SS
(small bowl), LKWERBSS (either bowl).
Utensil Caddy for Rinsing Basket: LKWUCSS.
Bottom Grid: LKWBG1415SS (small bowl).
Cutting Boards: CBR1316 (large bowl), CB1516 (small bowl).
SINK DIMENSIONS (INCHES)*
Cutout in
Inside Each Bowl
Model
Number LWLWDLWD L W4" Centers Size
ES E250 33 22 131/2 18 81/8 14 153/4 81/8 323/8 213/8 3 or 4 36
*
Leng t h i s left to right. Width is front t o back.
Overall Left Right Corners)
Countertop
1
(1
/2" Radius
No. of
1
1
/2" Dia. Minimum
Faucet Holes Cabinet
Elite by Elkay™Double Bowl Sink
Model ESE250
odel ESE2504
M
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
Elkay
elkayusa.com
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
2222 Camden Court
Oak Brook, IL 60523
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Printed in U.S.A.
©2007 Elkay
(Rev. 7/07) 1-151B
Loading...