Model EG33224 Illustrated
33"
(838mm)
14"
(356mm)
14"
(356mm)
15-1/4"
(387mm)
8-1/4"
(210mm)
15-3/4"
(400mm)
22"
(559mm)
2-1/4"
(57mm) R
3"
(76mm) R
5"
(127mm)
4"
(102mm)4"(102mm)4"(102mm)
eluminaTMby Elkay Double Bowl Sink
HOLE DRILLING
CONFIGURATIONS
1
2
MR2
3
4
5
4"
(102mm)
4"
(102mm)
4"
(102mm)4"(102mm)
4"
(102mm)4"(102mm)4"(102mm)
4"
(102mm)4"(102mm)4"(102mm)4"(102mm)
S P EC IF I C AT I ON S
ENERAL
G
Fine quality sink bowls seamlessly formed of #18 (1.2mm)
gauge, type 304 nickel bearing stainless steel. Self-rimming.
DESIGN FEATURES
Bowl Depth: 8-1/4" (210mm).
Coved Corners: 3" (76mm) vertical and 2-1/4" (57mm) hori-
zontal radius.
owl and Faucet Deck Recess: 3/8" (10mm) below outside
B
dge of sink.
e
Finish: Exposed surfaces are polished to a non-directional soft
satin finish.
Underside: Sound absorbing pads applied to dampen sound.
Aqueduct (recessed partition) allows water to flow to adjacent
bowl before overflowing sink.
OTHER
Drain Opening: 3-1/2" (89mm).
NOTE: Unless otherwise specified, sink is furnished with 4
faucet holes as shown.
This sink complies with ASME A112.19.3.
OPTIONAL ACCESSORIES
Rinsing Baskets: LKRB1611 or LKERBSS.
Bottom Grid: LKOBG1416.
Cutting Board: CB1516.
SINK DIMENSIONS*
Cutout in
Countertop No. of 11/2"
Model 4" (102mm) Cabinet
Number LWLWD L W Center Size
Overall Inside Each Bowl Radius Corners] Faucet Holes Minimum
[11/2" (38mm) (38mm) Dia.
Model EG33224
Model EG3322
*Length is left to right. Width is front to back.
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
Elkay
elkayusa.com
EG 332 2 33 22 14 153/4 81/4 323/8 213/8 1, 2, MR2, 3, 4 or 5 36
(838mm) (559mm) (356mm) (400mm) (210mm) (822mm) (543mm) (914mm)
2222 Camden Court
Oak Brook, IL 60523
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Printed in U.S.A.
©2008 Elkay
(Rev. 7/08) 1-200A