ELK 964B20 User Manual

* Try these other ne ELK products *

M1 (Std) Integrates Security, Lighting, Telephone, and

M1G (Gold) More powerful version of M1 with more expan-

M1KP LCD Keypad, 2 x 16 Character, backlighted
M1XIN 16 Zone (input) expander. Up to 12 per sys.
M1XOVR 16 Output expander. 8 voltage/8 Relays
M1XOV 16 Output expander. All low voltage pins
M1RB 8 relay board for use w/Ctrl,XOVR, or XOV
M1DBH Data Bus wiring hub for multiple homeruns
M1XEP Ethernet port expander/interface
M1XSP Serial port expander for additional serial ports.

MM220 2 Input, 2 Output, Programmable Controller
MM443 4 Input, 4 Output, Programmable Controller
MB485 Data Bus Interface, RS232 to RS485

1RT Speaker & Stainless Steel Enclosure
150RT Siren & Stainless Steel Enclosure

44 Speaker, 30 W,8 Ohm Compact Horn
45 Siren, Compact Horn, 118db
M120 Siren, Single Tone, 107db, Mini Horn
SP15 Speaker, 15 watt, Small Horn
SP30 Speaker, 30 watt, Horn
SP35 Speaker, 20 watt, Interior
SP40 Speaker, 40 watt, Horn
SS15 Siren, Dual Tone, 110db, Horn
SS30 Siren, Dual Tone, 120db, Horn
SS36 Siren, Dual Tone, 105db, Interior

73 ECHO Speaker, 20 Watt, Interior
74 ECHO Dual Tone Siren, Interior
75 ECHO Voice Siren, Interior
870 ECHO Speaker, Self Amplied

100 High Performance Siren Driver
110 Voice Siren Driver, English & Spanish
120 Recordable Voice Module and Siren
124 Recordable Voice Module, 4 Channels

950 Surge Suppressor, Phone & Power Line
951 Surge Suppressor, Phone - Single Line
955 Surge Suppressor, Phone - Dual Line

912 Compact Relay,12 Vdc, SPDT
912B Heavy Duty Compact Relay,12/24 Vdc, SPDT
924 Sensitive Relay, 12/24 Vdc, DPDT
941 Alarm Output Director
960 Delay Timer Relay, 1 sec. to 60 min.

1250 Battery, Lead Acid, 12v, 5Ah
1280 Battery, Lead Acid, 12v, 8Ah
P112 12 Volts DC, 1 Amp Power Supply w/Enclosure
P124 24 Volts DC, 800mA Power Supply w/Enclosure
P1216 12 Volts DC, 1.5 Amp Power Supply
P412 12 Volts DC, 4 Amp Power Supply
P624 Power Supply & Battery Charger
PD9 Power Distribution Module
965 Low Battery Cutoff and Power Switch
TRG1640 Transformer, 16.5VAC @ 40 VA
TRG2440 Transformer, 24VAC @ 40 VA

129 Computer Sound Card Interface
800 Audio Amplier, 10 Watts
900-2 “B” Connectors,Unlled,500 pcs
902-2 “B” Connectors,Gel lled,500 pcs
980 Telephone Line Fault Monitor
999 Double Sided Tape
SL1 Strobe Light, 4 colors available
WK1 Wall Mount Kit for SL1 Strobes

For more information contact your local Distributor or:
ELK PRODUCTS,INC 828-397-4200 FAX [phone]
http://www.elkproducts.com Email: [e-mail]

M1 Cross Platform Control

Energy Management. Powerful “Rules” based
automation capabilities. Up to 208 Zones.

sion and capabilities.

Magic Module Series

Rust Free Sirens / Speakers

Speakers & Sirens

™

ECHO

Sirens & Speakers

Siren & Voice Drivers

Surge Suppressors

Relay Modules

Power Products

Accessories

Master Power Switch

ELK-964

APPLICATION:

The ELK-964 connects in series with the AC
and DC (battery) power input of virtually any
low voltage device. It features a Power Indica­tor LED and a single slide switch that allows the
power to be turned on or off for convenience
and servicing.

Master Power

Switch

ELK-964

The ELK-964 Master Power Switch permits the
installer or user to easily disconnect both the Bat-

tery and the AC
supply.

FEATURES:

• Works with virtually any low voltage device.

• AC and Battery On / Off Power Switch.

• Visual LED Power Indicator.

• Installer Friendly - Small Compact Size.

• Includes AC Wires & Battery Leads.

• Fits Standard Snap Track.

• Includes Double Sided Mounting Tape.

• Lifetime Limited Warranty, call for details.

• Packed In Reusable Poly Storage Box.

SPECIFICATIONS:

• Size: 1.75" X 2.185" (44.5mm X 55.5mm).

• On / Off Power Switch: DPDT Slide Type.

• AC Power Leads: 18AWG, 18" Length.

• Maximum Transformer Size: 18 VAC.

• Battery Leads: 18 AWG, 16" Length.

Features or Specications subject to change without notice.

PO Box 100 • Hwy. 70W • Hildebran, NC 28637 • USA

power from the control or power

828-397-4200 Voice
828-397-4415 Fax
http://www.elkproducts.com
email: [e-mail]

07/04

Instructions Printed On Inside

ELK-964 INSTRUCTIONS

The ELK-964 is extremely useful for adding a Master Power On / Off switch to virtually any
12 Volts D.C. Control Panel or Power Supply.

1. Disconnect AC transformer and battery from the Control or Power supply.

2. Turn off the Power Switch on the ELK-964.

3. Connect blue wires from the ELK-964 to the AC input of the Control or Power Supply.

4. Connect red and black battery wires from the control or power supply to the male
spade lugs on the ELK-964.

5. Connect AC transformer wires to the terminals marked AC IN on the ELK-964.

6. Connect red and black battery wires from the ELK-964 to the 12 Volt D.C. standby bat­tery.

Note: The Power indicator LED will not illuminate unless all connections are com-

plete and the power switch is On.

Installation

The On / Off switch allows both the AC and DC (battery) power to be turned off to a control

Operation

or power supply. The green Power On LED primarily indicates the status of the incoming
AC power, however it can also provide other useful troubleshooting indications.

LED On = AC Power is On and the red and black battery wires from control are con­nected.
LED OFF = AC Power is Off or the red and black wires from control are both disconnect­ed.
LED Dim = AC Power On but one of the red or black wires from control is disconnected.

Caution: The ELK-964 cannot determine the status or condition of a battery. This
functionality would have to be provided by the control panel or power supply.

* * Green "Power On" LED Indications