ELK 960 Specsheet

Delay Timer Module

ELK-960

The ELK-960 Delay Timer is designed to be an
economical and exible solution for any general­purpose timer application. The unit can be
congured for use on 12 to 24 Volt D.C. systems,
with positive or negative trigger logic. Positive
triggers can be as low as 4.5Volts. Setup is quick
and easy with thumbwheel adjustment between 1
and 60 seconds. A quick jumper setting converts
the time from seconds to minutes!. The Timer can
be congured to activate once for each trigger, or
free-run as soon as power is applied. Relay can
be congured to be normally on or normally off.

Features

• 12 to 24 Volt D.C. Operation.

• Adjustable Time Delay.

• SPDT (Form “C”) Relay.

• Low Current Input Trigger (<1mA).

• Selectable Positive or Negative trigger.

• Selectable Initial Relay State: ON / OFF.

• Operating Modes: One-Shot or Repeat.

• LED Indication of Relay State.

• Lifetime Limited Warranty.

Specications

• Operating Voltage: 12 to 24 Volts D.C.

• Current Draw: 40mA DC with relay on.

• Time Settings: 1 Second to 60 Minutes.

• Relay Contacts: Form “C”, 7A @ 30 VDC, 10A @ 125 VAC.

• Size: 3” x 2.2” x 1” (Fits Standard Snap Track).

• Trigger Voltage: 4.5 - 24 Volts D.C.

PO Box 100 • Hildebran, NC 28637 • 800-797-9355 • 828-397-4200
Fax [phone] • www.elkproducts.com • [e-mail]