ELK 950 Specsheet

Product Specification Sheet APS449 - Rev. 07/2013

950 Digital Hand-Held Programmer Unit950 Digital Hand-Held Programmer Unit

387 CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone] CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone]

Web: www.canalalarm.comWeb: www.canalalarm.com

Copyright © 1998-2 017 Alpha Communication s® - All Righ ts Reserved.

Digi-Bus is a registered trademark of Paso Sou nd Produ cts Inc.

Elvox is a registered trademark of Paso Sound Product s Inc.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

950 Series Digi-Bus™ Digital Hand-Held950 Series Digi-Bus™ Digital Hand-Held

Programmer UnitProgrammer Unit

The Alpha Communicat ions® 950 (Digi-Bus™ Series) Digital Hand­Held Programmer Unit is used for programming entrance panel and
(concierge) switc hboard operating parameters and for
entering user (directory) names in panels equipped with elect ronic
directories.

The programmer unit is equipped with an alphanumeric membrane
keypad and 4-line back-lit alphanumeric display, and is c omplete
with a 120VAC power supply and line cord.

The programmer unit is also equipped with a c onnec ting c able for
quick connec tion to t he entrance panels and (conc ierge)
switc hboards.

The 950 programmer is typically used with the model 955 concierge
switc hboard, and the following series ent ry panels; 944, 944T,

947, and 947T.

Architects' And Engineers' SpecificationsArchitects' And Engineers' Specifications

The digital hand-held programmer unit(s) shall be the Alpha Communications®/Elvox™ (Digi-Bus™) 950 or approved equal. Unit shall c ontain
a membrane keypad, bac k-lit 4-line alphanumeric display and 120VAC power supply and line cord.

Unit shall be equipped with a c onnect ing cable for quick connec tion to t he entrance panels and (conc ierge) switc hboards. Unit shall be used
with the model 955 conc ierge switc hboard, and the following series ent ry panels; 944, 944T, 947, and 947T.

Contractor shall observe all local and national electrical codes.