Elife AIR OWNERS MANUAL

POWER ASSISTED BICYCLES

OWNERS MANUAL

Welcome to the World of e.bike cycling.

POWER ASSISTED BICYCLES

Firstly may we congratulate you on purchasing your new electric power assisted e.bike.

Please take time to read your manual. We have tried to write it in a way that is simple and easy to follow, whilst explaining how your bike works and how it is maintained. At any point if you feel you need help we have a tehnical helpline for support.

Please call our Technical help line:

(weekdays 9am-5pm)

01702208187

(standard call rate charge applies)

Simply explained this is how your e.life bike basically works.

1. Switch the battery to ON, with the switch on the side left-hand side of the

frame, to the front of the bike.

2. Switch the power on by pressing the top left button on your controller on

the handlebars.

the wheels of your bike.

3. After one complete turn of the pedal the electric motor kicks in making

pedaling much easier.

4. There are 9 setting on your controller on the handlebar, allowing you to set

the level of assistance you require. For example: Riding up a hill you’ll probably use ‘High’, mode.

5. Change the level of assistance you need at any time and as often as you wish.

6. The motor works to assist pedalling, stop pedalling and the motor stops too.

7. Applying the brakes cuts the motor

8. You can also choose to switch the assist OFF and ON on the controller at any

point in your journey. This helps to save battery power when its not needed.

should be able to obtain around 20 miles, before you need to re-charge your battery.

We Recommend that you get used to your new e.life bike and the level of assit you place on it, you’ll soon be able to work out how long a journey you can make and safely return under assist. You can of course ride as you would a normal bike if the charge runs out.

(Fig.15)

(Fig.18)

(Fig.15)

(Fig.14)

INDEX

POWER ASSISTED BICYCLES

Contents check list

1. Your E.Life

2. Saddle & Seatpost

2. Box containing:

a. Battery Charger

b. Battery Lead

3. Box containing:

a. Tool kit and bag

b. This Manual

4. Set of Keys

( attached to handlebar cables)

IMPORTANT!

PLEASE REMEMBER THAT IT IS IMPORTANT TO KEEP THE CARTON YOUR BIKE ARRIVED IN , COURIERS CANNOT COLLECT YOUR BIKE WITHOUT A CARTON SHOULD YOU HAVE NEED TO RETURN IT TO US.

Page 2 Welcome to E.Life

There are video tutorials online or on Ideal World’s website designed to assist you if you need help.

Page 3 Index & Check List Page 4 Unpacking your new E.Life Page 4-6 Unfolding your E.Life Page 6 Fitting the saddle Page 7 Pre-Ride checks Page 7 Getting Started Page 8 Understanding your controller Page 9 Understanding your Battery Page 10 Charging your Battery Page 11 Maintenance of your E.Life Page 12 Simple Troubleshooting Page 13 Warranty Page 14 Replacement Batteries & Chargers Page 15 National Service Centre

Please call our Technical help line:

(weekdays 9am-5pm)

01702208187

(standard call rate charge applies)

Unpacking your new e.bike

POWER ASSISTED BICYCLES

Fig.1

Fig.2

Fig.3

Your bike comes 100% assembled in the Carton

1. Before you begin to unpack your e.bike we recommend you get another person to assist you as it s much easier with 2 persons to lift out of the box.

2. Remove all the packing materials used to protect the bike and dispose of it later in a responsible manner.

3. Once you have unpacked the bike it is a good idea to check to make sure there has not been any damage in transit. ( If you nd anything missing or damaged, contact Ideal World customer services) idealworld.tv › gb/self-service

Unfolding your e.bike

Step 1. Frame

1. Unfold the frame until the 2 sections are inline

2. Push the large lever towards the fame to lock together

3. Turn the Black security clip clockwise until covers the pin on the Lever,

this prevents the Lever from opening.

4. To fold your frame for transport of storage simply reverse steps 1-3.

PLEASE NOTE: When you have unfolded your frame its a good idea to rest your bike on the bike stand which is attached to the left rear chainstay, this makes it much easier to complete the other steps.

(Fig.4)

(Fig.3)

(Fig.1)

(Fig.2)

Fig.4

CENTRAL Allen key bolt for adjustment

Unfolding your e.Life

Step 2. Handlebars and Stem

POWER ASSISTED BICYCLES

Fig.5

1. Unfold by lifting the handlebars and Stem until it is sitting vertically.

(Fig.5)

2. Raise the clamp arm up towards the stem to lock inplace. ( can be a little sti, so please push hard )

(Fig.6)

3. Rotate the security ring until the arm of the security ring slides into the slot on the clamp arm.

(Fig.7)

4. Should you need to align the front wheel with the handlebars untighten the central allen key bolt - align - and re-tighten.

(Fig.5)

5. To adjust the height of the handlebars simply release the quick release by lifting the arm outwards as shown, if extra tightness is required turn the knurled nut clockwise till required tightness is obtained.

There are video tutorials online or on Ideal World’s website designed to assist you if you need help.

Handlebar position can be adjusted by simply slackening of the 2 allen key bolts, retighten evenly.

Knurled adjustment nut a quater of a turn until required tightness is obtained.

(Fig.8)

Fig.6

Fig.7

Fig.8

+ 11 hidden pages