Elgen EE-121, EE-122, EE-123, EE-124, EE-125 User Manual

ELEVATED DAMPER REGULATORS
(EE-SERIES)

Product Data Sheet

Features

All Metal Construction
Raised handle for ease of pivoting
Locking mechanism allows for any angle of
damper blade
Construction of punched tab on handle holds the
rod rm to eliminate raddle noises

Description

Elgen’s Elevated Damper Regulators are used
on rectangular and round duct work. Using an
elevated base allows for insulation to be ush
with the handle. The size of the stando is
determined by the Engineer, or the thickness of
the insulation.

Standard Construction

Handle is stamped from 15 GA ASTM A-653

Galvanized Steel

Base is stamped from 20 GA ASTM A-653

Galvanized Steel

Bolt and wing nut are Grade 2 zinc plated.

Optional Construction

Stainless Steel 304
Stainless Steel 316
Aluminum

Packaging

Item# Box Quantity Shaft Size Height

EE-121 100 1/4” 1”

EE-122 100 1/4” 1-1/2”

EE-123 100 1/4” 2”

EE-124 100 3/8” 1”

EE-125 100 3/8” 1-1/2”

EE-126 100 3/8” 2”

EE-127 100 1/2” 1”

EE-128 100 1/2” 1-1/2”

EE-129 100 1/2” 2”

Elgen Manufacturing

10 Railroad Ave, Closter NJ 07624
Tel: [phone] :: Fax: [phone]
[e-mail] :: www.elgenmfg.com

ALL STATED SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE OR OBLIGATION

Guarantee

All Elgen products are guaranteed by Elgen
Manufacturing against defective material.