TM-1 MIDI INTERFACE USER’S GUIDE
Thank you for choosing the TM-1 MIDI interface. The TM-1 allows MIDI transmissions up to 10x the original speed using compatible gear.
It is specifically designed to be used together with Elektron gear, but also works perfectly with standard MIDI equipment. To make the
most of the special features of the TM-1, please take your time to read through this user’s guide, and check the support page of the
Elektron Website.
THE EVOLUTION OF MIDI!
MIDI is still, over 20 years since its introduction, the predominant interface for interconnecting
musical devices. Well specified from the beginning, MIDI has proven to stand the test of time.
The TurboCharged protocol follows the full MIDI specification, but extends the protocol with
dedicated sysex messages to dynamically negotiate speeds of up to 20x the original MIDI
standard. The improved speed decreases data transfer times and improves musical tightness.
TM-1—THE TURBOCHARGED MIDI INTERFACE
The TM-1 was mainly developed to improve transfer times of sysex and sample data between
computers and Elektron gear up to 10 times. Naturally it also functions as a standard MIDI
interface for your sequencer with all MIDI compliant gear.
TM-1 FEATURES
INCLUDED IN THE BOX
✹ 10x MIDI SPEED
✹ USB 1.1 AND 2.0 COMPATIBLE MIDI INTERFACE
✹ FULL STANDARD MIDI SUPPORT
✹ SLEEK BRUSHED ALUMINIUM CASING
✹ 1x MIDI IN, 1x MIDI OUT
✹ USB POWERED
✹ XP/VISTA AND OS X DRIVER FREE OPERATION
✹ USB AUDIO STANDARD COMPLIANT
TM-1 MIDI INTERFACE
✹
✹
TM-1 USER’S GUIDE
✹
4x RUBBER FEET (OPTIONAL USE)
✹
1x USB CORD
TM-1 MIDI interface user’s guide. This publication is copyright © 2006—2008
Elektron Music Machines MAV AB. All reproduction without written authorization
is strictly prohibited. The information in this guide may change without notice.
Elektron’s product names, logotypes, titles, words or phrases may be registered
and protected by Swedish and international law. All other brand or product
names are trademarks or registered trademarks of their respective holders.
1
3
2
4
TM-1 OVERVIEW
MIDI IN PORT — RECEIVES INCOMING MIDI DATA.
USB CONNECTION — INTERFACES TM-1 WITH COMPUTER.
MIDI OUT PORT — SENDS OUT MIDI DATA.
TURBO BUTTON — TOGGLES THE TURBOMIDI MODE.
ACTIVITY LEDS — INDICATE MIDI IN, OUT AND TURBO.
5
1
3
5
USING THE TM-1 MIDI INTERFACE
INSTALLATION
On a computer running Windows XP/Vista or Mac OS X just connect the TM-1 to a free USB
port. The TM-1 will be automatically recognized by the computer. No drivers are needed.
USING THE TM-1 IN TURBO MODE
The TM-1 comes to its fullest when used together with the Elektron Machinedrum SPS-1/
SPS-1UW, the Monomachine SFX-6/SFX-60 and forthcoming TM-1 compatible equipment. Only
by using TM-1 compatible devices can the turbo mode be engaged. See first page »TM-1-
THE EVOLUTION OF MIDI« for examples of advantages.
Users of the SPS-1UW, will instantly enjoy the vastly improved sample transfer rate. You will need
to have at least OS 1.31 installed on the Machinedrum SPS-1/SPS-1 UW and OS 1.07 installed
on the Monomachine SFX-6/SFX-60 to be able to use the turbo mode.
We recommend using our C6 utility. C6 is specially developed to be the safest and quickest
utility for transferring sysex files and MIDI SDS samples, using any computer MIDI interface. C6
can be downloaded from the support page of the Elektron website.
CONNECT THE TM-1 TO THE USB PORT OF A COMPUTER.
CONNECT THE MIDI IN ON THE TM-1 TO THE MIDI OUT ON THE MIDI DEVICE.
CONNECT THE MIDI OUT ON THE TM-1 TO THE MIDI IN ON THE MIDI DEVICE.
PRESS THE TURBO BUTTON AND MAKE SURE THE TURBO LED IS CONSTANTLY LIT.
USB CORD MD MIDI OUTTM-1 MIDI IN
MD MIDI IN
TM-1 MIDI OUT
TIP! ARROWS PRINTED ON THE RIGHT HAND SIDE OF THE TM-1
INDICATE THE MIDI FLOW.
USING THE TM-1 MIDI INTERFACE WITH C6
OPEN THE C6 UTILITY FOR WINDOWS XP/
VISTA OR OS X. CLICK THE »CONFIGURE
BUTTON«. SELECT THE INPUT AND OUTPUT OF
»TM-1«. ON WIN XP BY DEFAULT, THE TM-1 IS
PRESENTED AS »USB AUDIO DEVICE«
TIP! UPDATE YOUR WIN XP TO LIST THE
TM-1 DEVICE AS »TM-1«.
CHECK SUPPORT PAGE AT WWW.ELEKTRON.SE
IN THE MAIN WINDOW OF C6, MARK THE
TURBO CHECKBOX TO ACTIVATE TURBO
MODE. THE TM-1 TURBO LED SHOULD BLINK
AND STAY LIT WHEN SUCCESSFUL. CHECK
THE MIDI SPEED TO THE RIGHT OF THE
TURBO TEXT IN C6.
TIP! BOTH MIDI IN & OUT NEED TO BE
CONNECTED FOR TURBO MODE.
SEE INSTALLATION GUIDE FOR DETAILS
PUSH THE BUTTON!
IN ANY PROGRAM YOU CAN ALWAYS TOGGLE TURBO MODE WITH THE TURBO BUTTON!
USING THIS FEATURE THE TM-1 POTENTIALLY ENHANCES ANY MIDI APPLICATION.
CREDITS
Concept and development
Anders Gärder
Daniel Hansson
Industrial & graphic design
Jesper Kouthoofd
Thomas Ekelund
User’s Guide
Jon Mårtensson
Daniel Hansson
CONTACT INFORMATION
This manual is copyright © 2006—2008 Elektron Music Machines MAV AB
Elektron website
www.elektron.se
Address
Elektron Music Machines MAV AB
Erik Dahlbergsgatan 3
411 26 Gothenburg
Sweden
WWW.ELEKTRON.SE
Loading...