eLEDing XAVX1002 Installation & Assembly

Thank you for choosing eLEDing!

It is important that you read this set-up instruction before installing

Any questions or issues, please contact us before returning

Our goal is 100% customer satisfaction

Please post your positive feedback on the web-stores

We appreciate your business! Thanks again!

(Refer Page 2 for detail of Installation)

INSTANT 10 % DISCOUNT COUPON for any of these High Performance Solar Lights

(BP)

(WP)

Equivalent to 100W+ Halogen Lamp or

200 pieces traditional LED matrix flood lights

Dusk to Dawn continuous illumination

Dusk to Dawn continuous illumination w/ motion sensing

Ideal for wall Logo, advertising/sign, and entrance safety lighting

EE818PLUS

Upgraded dual operating SMART modes

User-friendly installation & setup w/ Remote control

EE805W1FRC & EE810W2FRC

High efficient wall-pace lighting

Dusk to Dawn continuous illumination

Equivalent to 80W+ Standard Lamp

EE815WDC

Extendable with multiple units

Ideal safety lights for stairs, fence, walkway

Dusk to Dawn continuous illumination

Color-changing illumination activated by sound

EE801W-SL(G)

Equivalent to 60W+ Halogen Lamp or

100+ pieces traditional LED matrix flood flights

Dusk to Dawn continuous illumination

EE814PLUS

Two adjustable ultra-bright LED flood lights

provide a brightness level equivalent of up to

Dusk to Dawn continuous illumination

User-friendly installation & setup

Equivalent of up to a 30-Watt standard bulb

Dusk to Dawn continnuous illumination

EE828WDC

50x50 W+ Halogen lamp

EE805W56

Contact Info: [phone], [e-mail], www.eleding.com

EE805W-SFLH / EE805W-SF(RGB)- 12262017-Page1

Solar-Powered Outdoor/Indoor Flood/Decoration Wall Pack Light

eLEDing EE805W-SFLH / EE805W-SFLH(RGB) Quick Set-up Reference

Light Body Installation

For ground application, secure the ground stake on U-shape brackets, insert the ground stake in your desired location (Fig 1).
For wall-mounted application, drill the holes on desired locations, secure the bracket with provided screws (Fig 2).

For wood surfaces: drill the holes on pre-marked locations and install the mounting bracket.
For surfaces of concrete, brick or stucco: use a masonry bit (with appropriate size & length) to drill clearance holes.

Solar Panel Installation

An ideal installation area should be a flat and stable mounting surface that can ensure the maximum exposure to direct sunlight. An
average of 4-hour direct sunlight per day is necessary for dusk-to-dawn performance (Fig 3). The light will automatically turn off
when it detects low voltage from the battery caused by poor weather or bad location, this might happens after 3-4 cloudy days. For
northern hemisphere installation, a southern-facing solar panel is recommended and visa-versa for southern hemisphere
installation. East/west-facing installations with good sunlight exposure also works.

True Dusk to Dawn Illuminating Profile:

During daylight hours, the sun will charge the batteries through solar panel. During nighttime the light will automatically turn on in
darkness when the built-in photocell senses the ambient light level is lower than 10 LUX/ completely dark. When dawn comes, the
light extinguishes when ambient light level start to increase (This light is not featured with any motion sensing technology. For solar­powered SMART lights with motion sensing features, please refer to other eLEDing & eSenlite products: www.eLEDing.com).

Functionality Test & Activation

Connect the solar panel with the light. If testing is lunched during daytime, make sure the solar panel is fully covered by a piece of
cardboard. Momentary press the red-color ON/OFF button to activate the light (Fig 4). If the light doesn’t turn on, recharge the
battery for 1-2 days. To shut down the light, long hold press the button for 1-2 seconds, then disconnect the solar panel from the
light after fully charged for storage.

Setup Lighting Profile

EE805W-SFLH has two brightness mode: half and full (max) brigthess level. To continue pressing the ON/OFF button to select.
EE805W-SFLH(RGB) has 6 RGB color combination and 4 dynamic modes. To continue pressing the ON/OFF button to select.

Color changing sequences: RGB→R→RG→G→GB→B→RB→FLASH→STROBE→FADE→SMOOTH

Fig 1

Fig 2

Fig 2 Fig 4

Notes:

Avoid placing objects in front of the motion detector
Avoid installation near air conditioners/central heaters/high voltage systems
Avoid placing the motion detector head towards high movement areas
Clean the solar panel with a moist soft cloth at least once a year
Clean accumulated snow as soon as possible during the snowing season
Do not expose the light to fire/intense heat or immerse in water
Never look directly into the light or shine it into another person’s eyes

Contact Info: [phone], [e-mail], www.eleding.com

EE805W-SFLH / EE805W-

SFLH(RGB)- 12262017-page 2