Electro-Voice Xlvc Series XLD-281, X Line Very Compact XLD281 Technical Specifications
Key Features:
• Very Compact, Lightweight
• CCT
• Simple, Quick Integrated Rigging
• 120° Horizontal Coverage to 200 Hz
• Versatile Subwoofer Integration
• Bi-Amp or Tri-Amp Operation
• Neodymium T ransducers
• LAPS Aiming and Flying Software
TM
(Coverage Control Technology)
XLD281
3-Wa y, High-Output,
Very Compact
Line-Array Element
General Description:
The XLD281 is a 3 –way design using CCT (Coverage Control
T echnology) to control horizontal coverage to 200 Hz. It uses an 8"
neodymium LF transducer, an 8" neodymium LF/MB transducer,
and two neodymium 2" voice coil compression drivers combining
through 2 hydra plane wave generators into a 120° x 10° waveguide.
CCT uses both 8" transducers to provide maximum low frequency
output and operating bandwidth while controlling horizontal beam
width to 200 Hz by using DSP . The XLD281 can be used in tri-amp
mode, or in bi-amp using a sophisticated internal passive network.
Designed for use in arrays of four or more elements, the XLD281
delivers full bandwidth audio with precise, predictable coverage
control. Integrated rigging with hinge points located correctly
between array elements is simple to use and quickly provides
uncompromised line array performance. Groundstacking is easily
done by using EV’s XGS-4 Groundstack Kit for XL VC.
The XLVC family consists of two full-range systems with dual
woofers, two full-range systems with single woofers and a
subwoofer system. The dual-woofer versions include the XLD281
with a 120° horizontal coverage pattern and the XLD291 with a 90°
horizontal coverage pattern. The single-woofer versions include
the XLE181 with a 120° horizontal coverage pattern and the XLE191
with a 90° horizontal coverage pattern. The subwoofer module is
the XS212. Most applications using flown very compact elements
require subwoofers integrated into the same array as the full range
systems. XLVC provides three methods to conveniently do this.
The XS212 sub woofer module can be directly arrayed above, or
below XLD281 full range systems. Where vertical space is limited
sub woofer arrays can be created and flown behind the XLD281
full range array using an additional grid and EV’s CBEAM (Coupler
Beam). LAPS modeling software quickly provides array
configurations and rigging information. Using the AGCD Adapter
Grid, XLD cabinets can also be flown or groundstacked with the
XLC215 dual 15-inch subwoofer.
XLVC delivers unprecedented performance in applications ranging
from live reinforcement to performing arts venues, to houses of
worship.
Technical Specifications:
1
esnopseR.qerF
1
egnaR.qerF
1
Full Space Measurement of 4 Elements.
2
Full Space Measurement of HF Section of 4 Elements. SPL Adjusted for 1m Distance.
3
Use EV or KT Signal Processing or Download Presets from Electro-Voice Website.
:)Bd3-(zHk81-zH57
:)Bd01-(zHk02-zH06
2
:kPBd941,.tnoCBd341
LPSdetaluclaCxaM
:egarevoClatnoziroH°021
:egarevoClacitreVelbanifeDerawtfoS,tnadnepeDyarrA
:gniggiR,stnemercni°1,munimulAevitpaCylluF
:gnildnaHrewoP1FLkaePW008,.tnoCW002
:gnildnaHrewoP2FLkaePW008,.tnoCW002
:gnildnaHrewoPFH,.tnoCW08
rewoPFH/1FLpmaiB
:gnildnaH
3
qerFssapdnaB
:zH052-05
revossorCFHot1FL
3
qerF
:
:dnabssaP1FL
:reifilpmAdednemmoceR
:dnabssaP2FL
:reifilpmAdednemmoceR
:dnabssaPFH
:reifilpmAdednemmoceR
:dnabssaPFH/1FLpmaiB
:reifilpmAdednemmoceR
:srotcennoC8LNx2
:lairetaMerusolcnEtaoCVE/wdoowylphcriB
:ellirGtniaptaocredwophtiwleetsdetalpcniZ
:cepSlatnemnorivnE018LIM,42PI925CEI
:)DxWxH(miD"25.41x"85.82x"09.9
:thgieWteN)gk8.12(sbl84
:thgieWgnippihS)gk1.32(sbl15
kaePW023
kaePW008,.tnoCW002
zH0671
smho61,0802NVD"8x1
S0003PCVE
,smho61,0802NVD"8x1
S0003PCVE
smho61,8-S2DNx2
S0003PCVE
,smho61
S0003PCVE
MT
)mm963x627x152(
rotcaFytefaS1ot8htiwstnemele61
kaePW008,.tnoCW002-2FL
Block Diagram:
Beamwidth:
360
100
20
-6dB Beamwidth (degrees)
Connection Chart
(Pins 1 Pass Through)
pmairTpmaiB
:2FL2sniP:2FL2sniP
:1FL3sniP:FH/FL3sniP
:FH4sniPhguorhTssaP4sniP
Grid Drawing:
Dimension Drawings (inches/metric):
3.6
Frequency (Hz)
Impedance:
200
100
50
20
10
Impedance (Ohms)
5
2
1
Fre que nc y (Hz)
10001005020 2000010000
Performance Match:
• XLD291 - 90° Full-Range Line Array Element
• XS212 - Dual 12” Side-Firing Line Array Bass Element
• XLC215 - Dual 15” Line Array Bass Element (Requires AGCD)
• CP3000S - Precision SeriesTM Power Amplifier
• P3000RL - Precision SeriesTM Remote Control Power Amplifier
• P1200RL - Precision SeriesTM Remote Control Power Amplifier
• Dx38 - Digital Sound System Controller
• DN9848 - Digital Sound Controller
• XLD/XS Dolly - 4-Tall Bottom Dolly for Rigging and Transporting
• XLD Grid - Grid for Hanging XLD or XS212 Line-Arrays
• AGCD - XLC to XLD Series Adapter Grid
• CBEAM - Coupler Beam for XLD/XLE to XS212 Arrays
• XGS-4 - Groundstack Kit for XLVC Line-Arrays
XLD281 Part Numbers:
• XLD281 (Black) - 301789-001
• XLD281 (White) - 301789-002
HF
LF1 & LF2
2000010000100010020
Top
12000 Portland Avenue South, Burnsville, MN 55337
Phone:952/884-4051, Fax:952/884-0043
www.electro voice.com
© Telex Communications, Inc. 6/2007
Part Number 38110-430 Rev B
SideFront
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
Loading...