Electro-Voice Xlc Series Xlc-127 plus, Xlc Series Xlc-215, Xlc127+3W118 Datasheet

r

r

y

r

Xlc127+3W118 DN9848(e) P3000 0dBu V2.6

Output levels and limiter settings assume equal amplifier power to each passband with amplifier input sensitivity of 0dBu

Output 1 Output 2 Output 3 Output 4 Output 5 Output 6 Output 7 Output 8

Output Label
Output Delay 1.85ms 916.67us 562.5us 0s 1.85ms 916.67us 562.5us 0s

Polarity Invert no no no no no no no no

Output Gain 0dB 1dB -5dB -6dB 0dB 1dB -5dB -6dB

HP Filte

Type BW24 LR24 LR24 LR24 BW24 LR24 LR24 LR24

Frequency 33.7Hz 100Hz 500Hz 1.6kHz 33.7Hz 100Hz 500Hz 1.6kHz

LP Filte

Type LR24 LR24 LR24 BW24 LR24 LR24 LR24 BW24

Frequenc

All-Pass Filte

Frequency

Slope

Filter 1

Filter Type PEQ PEQ PEQ PEQ PEQ PEQ PEQ PEQ
Frequency 37.4Hz 125Hz 227Hz 1kHz 37.4Hz 125Hz 227Hz 1kHz

Gain 4dB 2dB 2dB -6dB 4dB 2dB 2dB -6dB

Filter 2

Filter Type PEQ PEQ PEQ PEQ PEQ PEQ PEQ PEQ
Frequency 200Hz 484Hz 650Hz 2.27kHz 200Hz 484Hz 650Hz 2.27kHz

Gain -2dB 1dB -3dB -12dB -2dB 1dB -3dB -12dB

Filter 3

Filter Type PEQ PEQ PEQ PEQ PEQ PEQ PEQ PEQ
Frequency 800Hz 591Hz 2.13kHz 4.84kHz 800Hz 591Hz 2.13kHz 4.84kHz

Gain -8dB -9dB 3dB -2dB -8dB -9dB 3dB -2dB

Filter 4

Filter Type PEQ PEQ PEQ PEQ PEQ PEQ
Frequency 1.21kHz 2.2kHz 14.5kHz 1.21kHz 2.2kHz 14.5kHz

Gain -4dB -4dB 6dB -4dB -4dB 6dB

Filter 5

Filter Type PEQ PEQ PEQ PEQ
Frequency 750Hz 826Hz 750Hz 826Hz

Gain 1dB -1dB 1dB -1dB

Filter 6

Filter Type
Frequency

Gain

Compressor

Threshold (dBu)

Ratio (N to 1)

Insert (In/Out)

Attack (us)

Release (ms)

Knee (Hard/Soft)

Limiter

Threshold (dBu) 2dBu 0dBu 0dBu -2dBu 2dBu 0dBu 0dBu -2dBu

Release (ms) 200ms 150ms 20ms 3ms 200ms 150ms 20ms 3ms

Notes: DN9848e and DN9848 with firmware V4.01 and higher have the ability to toggle between Q and BW for parametric filters. DN9848

with firmware V3.05 and older only use BW, use attached conversion spreadsheet to convert. Do not adjust output filters, use input filters for
room and system tuning. DN9848 with firmware V3.05 and older has a maximum of 100ms release time for limiters. For these versions,
change Subwoofer and LF release times to 100ms.

Xlc 118 127+ LF 127+ MB 127+ HF Xlc 118 127+ LF 127+ MB 127+ HF

100Hz 500Hz 1.6kHz 16kHz 100Hz 500Hz 1.6kHz 16kHz

off off off off off off off off

Q

Q 2.87 2.04 2.87 4.8 2.87 2.04 2.87 4.8

Q 0.92 2.87 1.78 1.78 0.92 2.87 1.78 1.78

Q 1.41 1.78 2.87 1.78 1.41 1.78 2.87 1.78

Q 2.87 4.8 1.58 2.87 4.8 1.58

Q 4.8 7.21 4.8 7.21

Q

out out out out out out out out

DN9848e BW to Q conversion

Q value BW value Q value BW value

18.03 0.08 1.78 0.8

14.42 0.1 1.58 0.9

7.21 0.2 1.41 1

4.8 0.3 1.17 1.2

3.6 0.4 0.92 1.5

2.87 0.5 0.67 2

2.39 0.6 0.511 2.5

2.04 0.7 0.4 3