Electro-Voice Xlc Series Xlc-127DVX Datasheet

r

r

y

r

Xlc127dvx 215 DN9848(e) P3000 0dBu V1.0

Output levels and limiter settings assume equal amplifier power to each passband with amplifier input sensitivity of 0dBu

Output 1 Output 2 Output 3 Output 4 Output 5 Output 6 Output 7 Output 8

Output Label
Output Delay 989.58us 885.42us 562.5us 0us 989.58us 885.42us 562.5us 0us

Polarity Invert no no no no no no no no

Output Gain 0.5dB 1dB -3.5dB -6dB 0.5dB 1dB -3.5dB -6dB

HP Filte

Type BW24 LR24 LR24 LR24 BW24 LR24 LR24 LR24

Frequency 33.7Hz 100Hz 500Hz 1.6kHz 33.7Hz 100Hz 500Hz 1.6kHz

LP Filte

Type LR24 LR24 LR24 BW24 LR24 LR24 LR24 BW24

Frequenc

All-Pass Filte

Frequency

Slope

Filter 1

Filter Type PEQ PEQ PEQ PEQ PEQ PEQ PEQ PEQ
Frequency 37.4Hz 117Hz 852Hz 967Hz 37.4Hz 117Hz 852Hz 967Hz

Slope/Q 0.67 1.41 2.39 3.6 0.67 1.41 2.39 3.6

Gain 2dB 4.5dB 1.3dB -6.3dB 2dB 4.5dB 1.3dB -6.3dB

Filter 2

Filter Type PEQ PEQ PEQ PEQ PEQ PEQ PEQ PEQ
Frequency 117Hz 361Hz 591Hz 2.5kHz 117Hz 361Hz 591Hz 2.5kHz

Gain 2dB -2.5dB -2dB -8.5dB 2dB -2.5dB -2dB -8.5dB

Filter 3

Filter Type PEQ PEQ PEQ PEQ PEQ PEQ PEQ PEQ
Frequency 374Hz 630Hz 2.34kHz 4kHz 374Hz 630Hz 2.34kHz 4kHz

Gain 2dB -4.5dB 3.2dB -2.3dB 2dB -4.5dB 3.2dB -2.3dB

Filter 4

Filter Type PEQ PEQ PEQ PEQ PEQ PEQ PEQ PEQ
Frequency 591Hz 1.25kHz 4.84kHz 15.5kHz 591Hz 1.25kHz 4.84kHz 15.5kHz

Gain -7dB -3dB -5.8dB 6.7dB -7dB -3dB -5.8dB 6.7dB

Filter 5

Filter Type PEQ PEQ PEQ PEQ
Frequency 200Hz 213Hz 200Hz 213Hz

Gain -1.5dB 1.5dB -1.5dB 1.5dB

Filter 6

Filter Type
Frequency

Slope/Q

Gain

Compressor

Threshold (dBu)

Ratio (N to 1)

Insert (In/Out)

Attack (us)

Release (ms)

Knee (Hard/Soft)

Limiter

Threshold (dBu) 2dBu 2dBu 0dBu -3dBu 2dBu 2dBu 0dBu -3dBu

Release (ms) 200ms 150ms 30ms 3ms 200ms 150ms 30ms 3ms

Notes: DN9848e and DN9848 with firmware V4.01 and higher have the ability to toggle between Q and BW for parametric filters. DN9848

with firmware V3.05 and older only use BW, use attached conversion spreadsheet to convert. Do not adjust output filters, use input filters for
room and system tuning. DN9848 with firmware V3.05 and older has a maximum of 100ms release time for limiters. For these versions,
change Subwoofer and LF release times to 100ms.

Xlc215 127dvx LF 127dvx MB 127dvx HF Xlc215 127dvx LF 127dvx MB 127dvx HF

100Hz 500Hz 1.6kHz 16kHz 100Hz 500Hz 1.6kHz 16kHz

out out out out out out out out

Q

Q 4.8 3.6 2.87 1.17 4.8 3.6 2.87 1.17

Q 4.8 1.17 2.87 1.17 4.8 1.17 2.87 1.17

Q 0.4 4.8 2.87 1.17 0.4 4.8 2.87 1.17

Q 4.8 1.78 4.8 1.78

out out out out out out out out

DN9848e BW to Q conversion

Q value BW value Q value BW value

18.03 0.08 1.78 0.8

14.42 0.1 1.58 0.9

7.21 0.2 1.41 1

4.8 0.3 1.17 1.2

3.6 0.4 0.92 1.5

2.87 0.5 0.67 2

2.39 0.6 0.511 2.5

2.04 0.7 0.4 3