Electro-voice XLC LINE-ARRAY BROCHURE

X-LINE COMPACT™ LINEAR ARRAY LOUDSPEAKER SYSTEM
EV®Line Arrays: A Breed Apart
When EV designers built their first line array, they didn’t settle for average. They developed a system that addressed every concern raised by line-array users. The formidable EV
X-Line™not only provides easy rigging, but also combines EV’s legendary sonic clarity and vocal intelligibility with the uniform, predictable coverage that only a superior line array can offer.
Now, the same designers have distilled the incredible sound of the X-Line into the new X-Line Compact. This revolutionary system delivers unprecedented performance and amazing flexibility to sound designers and installers everywhere. The applications list goes on and on: large indoor and outdoor spaces, high-ceiling venues, performing arts centers, auditoriums, large houses of worship with wide horizontal coverage requirements, coliseums, sports facilities, gymnasiums… anywhere first-quality sound is needed permanently.
XLC: Technology in Service of Perfection
The X-Line’s legacy is readily evident in the new XLC. Exceptional stereo imaging results from full-bandwidth midbass loading. Extended low-frequency polar control produces uniform power response and enhances system intelligibility. Onstage orientation of high-frequency components further improves stereo imaging and reduces polar lobing in the mid-bass response. Intelligent cabinet design minimizes the distance between drivers from cabinet to cabinet, maintaining true line-array characteristics even in curved-front arrays. Most importantly, the XLCuses EV’s revolutionary vertical plane-wave generator to correct high-frequency phase response and make vertical wave-front summing exceptionally coherent. All this adds up to incredible sonic clarity and uniformity, even in hard-to-cover areas.
Cabinets
The XLCsystem is designed for use in groups of four or more cabinets. As with the X-Line, three different cabinets offer maximum flexibility for applications. They are the XLC127 main cabinet, the XLC124 down fill cabinet, and the X
LC
118 subwoofer.
• The X
LC
127’s 3-way design employs an EV DL12 (X-variant) vented LF transducer, two 6.5" MF transducers on a 120° horizontal wave guide, and two EV DH2T 16-ohm HF transducers, each coupled through a vertical plane-wave generator to a 120° x 7° wave guide. The system can be either tri-amped or bi-amped in 2-way mode using the sophisticated internal passive MF-to-HF network.
• The X
LC
124 provides critical under-the-array coverage. Its 3-way system uses the same components in the same configuration as the X
LC
127, but only
one DH2T HF transducer on a 120° x 40° wave guide.
• The XLC118’s single EVX180B driver provides solid sub-bass extension to the X
LC
127 and 124. It can be either flown or ground stacked.
Innovative Rigging
The XLC’s advanced integrated rigging frame and easy-to-use, custom system hardware make one-person installations a reality. The captive front interlocking system has no separate parts to keep track of and “disappears” into the frame to maintain an uncluttered, attractive appearance. Single-pin rigging in the rear allows quick, easy adjustment of cabinet angles and array aiming. Straight-line arrays, curved arrays, and combinations of the two are all immediately configurable for every coverage need. It couldn’t be easier.
Key Features of the X-Line Compact
• Control with predictability
• Compact, lightweight design
• Fast integrated rigging
• True 3-way design
• Software aiming program
Technical Specifications for XLCCabinets
Specification XLC127 XLC124 XLC118
Horizontal Coverage 120° 120° 300°
LF Power Handling 300 W cont./1200 W peak 300 W cont./1200 W peak 600 W cont./2400 W peak
MB Power Handling 200 W cont./800 W peak 200 W cont./800 W peak
HF Power Handling 120 W cont./480 W peak 60 W cont./240 W peak
Sensitivity (LF/MB/HF) 95 dB/101 dB/110 dB 95 dB/101 dB/110 dB 96 dB (LF)
LF Transducer 1 x 12” DL12 (X-variant) 1 x 12” DL12 (X-variant) 1 x 18” EVX180B
MB Transducer 2 x 6.5” 2 x 6.5”
HF Transducer 2 x DH2T 1 x DH2T
Connectors 2 Neutrik
®
NL8 2 Neutrik®NL8 2 Neutrik®NL8
Enclosure Material Futura
®
-coated Futura®-coated Futura®-coated
plywood plywood plywood
Grille Steel Steel Steel
Environmental Specs IEC 529 IP24 IEC 529 IP24 IEC 529 IP24
MIL STD 810 MIL STD 810 MIL STD 810
Dimensions (H x W x D) 14.25” x 39” x 22.5” 14.25” x 39” x 22.5” 21.5” x 39” x 22.5”
(x x mm) (x x mm) (x x mm)
Net Weight 110 lbs (kg) 100 lbs (kg) 120 lbs (kg)
Shipping Weight 125 lbs (kg) 115 lbs (kg) 140 lbs (kg)
Technical Specifications for Four-Cabinet XLC127 Array
Specification 4 x XLC127 Array
Frequency Range (-3 dB) 70 Hz–18 kHz
Sensitivity (1W@1m) 112.5 dB
Max Calculated SPL (1W@1m) 135 dB cont./141 dB peak
Horizontal Coverage 120°
Vertical Coverage Splay dependant
LF Power (recommended) EV
®
P2000
MB Power (recommended) EV
®
P2000
HF Power (recommended) EV
®
P1200
12000 Portland Avenue South Burnsville, MN 55337 Phone: 800-828-6107, ext 7498 Fax: 952-887-5595 Web: www.electrovoice.com
Specifications subject to change without notice
PA20558
© 2002 Telex Communications, Inc.
EV’s revolutionary vertical plane-wave generator
SPECIFICATIONS
Loading...