Electro-Voice XLCI RIGGING User Manual

Step 1:

Assemble hardware to enclosure.

XLCi (Install) Series Rigging

Assembly and

Installation Instructions

1. Install Finger Tight.

2. Torque all bolts to 70-90
in-lbs. (84-108 cm-kg)
after completing array

assembly.

Step 2:

Assemble cabinet to array.

Split Washer

(x2)

Nut

Split Washer

Choose hole according

to XLC LAPS software

program.

Use handles as

needed to assist in

cabinet positioning.

Torque all bolts to 70-90 in-lbs.

(84-108 cm-kg)

12000 Portland Avenue South, Burnsville, MN 55337
Phone:[phone], Fax:[phone]

www.electrovoice.com

© T elex Communications, Inc. 3/2003

Part Number 38110-223 Rev A

Washer

U.S.A. and Canada only. For customer orders, contact Customer Service at:

Europe, Africa, and Middle East only . For customer orders, contact Customer Service at:

Other International locations. For customer orders, contact Customer Service at:

For warranty repair or service information, contact the Service Repair department at:

For technical assistance, contact T echnical Support at: 866/78AUDIO

(x2)

800/392-3497 Fax: [phone]

+ 49 9421-706 0 Fax: + 49 9421-706 265

+ 1 952 884-4051 Fax: + 1 952 736-4212

800/685-2606

Specifications subject to change without notice.

Split Washer