Electro-Voice XLC907DVX User Manual

Key Features:
Accurate Vertical Control & Coverage
Compact, Lightweight
Fast, Simple Integrated Rigging
Tri-Amp or Optional Bi-Amp Operation
T rue 3-W a y Design
LAPS Aiming Software
•90° Horizontal Full-Range Line-Array
TM
or Fixed Installation Rigging
XLC907DVX
XLCi907D VX
3-Wa y, High-Output
Compact Line-Array
90° Element
General Description:
The XLC family is designed to provide the highest quality performance for a variety of applications. It is comprised of two full range systems; XLC127DVX (120° line-array element), XLC907DVX (90° line-array element), and two subwoofers; XLC118, XLC215. The XLCDVX uses a DVX3121, two DVN2065 neodymium midrange transducers, and two ND6 high frequency transducers. The DVX3121 is a high performance low frequency transducer with forced air, directional voice coil cooling for high power and efficiency. The suspension and magnetic circuit were optimized for long, linear travel to provide low distortion and greater LF extension in a lightweight transducer. The DVN2065 transducer utilizes neodymium to provide very high output with lightweight and lower distortion. The 3-Way design is comprised of; a 12" vented LF, 2 x 6.5" MB transducers on a 90° horizontal waveguide, and 2 x 3" HF transducers combining through Hydras on a 90° x 7° waveguide. It is designed to be used in tri-amp mode. Bi-amp 3-way operation is possible using the optional sophisticated 24 dB/octave passive MF to HF network. The asymmetrical box design was optimized to produce a symmetrical polar pattern with a uniform power response. Designed for use in groups of four or more the XLC907DVX delivers predictability and control. XLC907DVX can be used in long narrow venues in arrays of four or more, or in groups of two or more in combination with the XLC127DVX 120° version for long throw on top of arrays. LAPS modeling software provides quick, accurate results for array configurations and rigging information.
Technical Specifications:
1
esnopseR.qerF
1
egnaR.qerF
MT
giR-kiuQ
1
Full Space Measurement of 4 Elements.
:)Bd3-(zHk81-zH56 :)Bd01-(zHk02-zH05
1
LPSdetaluclaCxaM
:kPBd151,.tnoCBd541 :egarevoClatnoziroH°09 :egarevoClacitreVelbanifeDerawtfoS,tnadnepeDyarrA :)sepyThtoB(gniggiR,stnemercni°1,munimulAevitpaCylluF
:gnildnaHrewoPFLkaePW0002,.tnoCW005 :gnildnaHrewoPBMkaePW0021,.tnoCW003 :gnildnaHrewoPFHkaePW006,.tnoCW051
)FH/BM/FL(ytivitisneS:Bd211/101/59
:qerFrevossorcBMotFLzH005 :qerFrevossorcFHotBMzH0061 :dnabssaPFL
:reifilpmAdednemmoceR :dnabssaPBM
:reifilpmAdednemmoceR :dnabssaPFH
:reifilpmAdednemmoceR :srotcennoC8LNx2 :lairetaMerusolcnEtaoCVE/wdoowylphcribylp-31 :ellirGtniaptaocredwophtiwleetsdetalpcniZ :cepSlatnemnorivnE018LIM,42PI925CEI :)DxWxH(miD
:)DxWxH(miDllatsnI
MT
:)
giR-kiuQ(thgieWteN
:)llatsnI( thgieWgnippihS
MT
:)
giR-kiuQ(
:)llatsnI(
rotcaFytefaS1ot8htiwstnemele61
smho8,1213XVD"21x1
7GT/5GT,S0004/0003PC,LR0003PVE
smho8,5602NVD"5.6x2
7GT/5GT,S0004/0003PC,LR0003PVE
smho8,61-6DNx2
7GT/5GT,S0004/0003PC,LR0003PVE
MT
"5.22x"93x"52.41
)mm275x099x263(
"5.22x"5.63x"52.41
)mm275x729x263(
)gk9.94(sbl011 )gk1.84(sbl501
)gk2.25(sbl511 )gk9.94(sbl011
Block Diagram:
Beamwidth:
360
100
20
-6dB Beamwidth (degrees)
Connection Chart
(Pins 1 Pass Through)
pmairT
:FL2sniP :BM3sniP :FH4sniP
Dimension Drawings (inches/metric):
Note: Quik-RigTM Loudspeaker shown. All dimensions
for Install version equal to Quik-RigTM version except
where shown.
Top
3.6
Frequency (Hz)
Impedance:
200
100
50
20
10
Impedance (Ohms)
5
2
1
Fre que nc y (Hz)
10001005020 2000010000
Performance Match:
XLC127DVX - 120° Full-Range Line Array Element
XLC215 - Dual 15” Subwoofer Loudspeaker System
XLC118 - Single 18” Subwoofer Loudspeaker System
P3000 - Precision SeriesTM Power Amplifier
CP3000S - Precision SeriesTM Power Amplifier
CP4000S - Precision SeriesTM Power Amplifier
P3000RL - Precision SeriesTM Remote Control Power Amplifier
P1200RL - Precision SeriesTM Remote Control Power Amplifier
TG5/TG7 - Tour Grade Power Amplifiers
Dx38 - Digital Sound System Controller
DN9848 - Digital Sound Controller
XLC-127 Cover - Protective Cover for Transporting
XCOV4 Cover - Protective Cover Fits 4 XLC127’s for Transporting
XFD-127 - Front Dolly for Rigging and Transporting
XBD - 4-Tall Bottom Dolly for Rigging and Transporting
XLC Series Quik-Rig
TM
Grid B1 - Grid for Hanging XLC Line-Arrays
Performance Matc h, Install Versions:
XLCi215 - Dual 15” Subwoofer Install Loudspeaker System
XLCi118 - Single 18” Subwoofer Install Loudspeaker System
XLCi Series Fixed Installation Grid B2 - Grid for Hanging XLCi Line-Arrays
XO-907DVX - Crossover Retrofit Kit for XLC/XLCi907DVX
XLC907DVX Part Numbers:
XLC907DVX (Black Finish) - PRD000099-001
XLCi907DVX (Black Finish) - PRD000097-001
XLCi907DVX (White Finish) - PRD000097-002
HF MB LF
2000010000100010020
12000 Portland Avenue South, Burnsville, MN 55337 Phone:952/884-4051, Fax:952/884-0043
www.electro voice.com
© Telex Communications, Inc. 5/2007
Part Number LIT000092 Rev 1
SideFront
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
Loading...