Electro-Voice PA2450 User Manual

Key Features:

• 2 x 450W at 4 Ohms

• 2 U Rack Space Chassis

• Rear Level Controls

• Bridge Mode Operation Provides
1 x 900W at 8 Ohms

• Complete Protection Package

• Selectable 50Hz or 300Hz Hi-Pass Filter for
each Channel

• Phoenix Type Inputs

• Phoenix T ype Outputs

• High Efficiency Circuit Design

• Front Panel Power On/Off

General Description:

The Electro-Voice® PA2450L is from the PA series of
professional commercial audio amplifiers. The direct path
airflow design reduces the heat buildup significantly and
allows for more amplifier channels and output power in
slim two rack space chassis. The audio performance of the
PA2450L is superior and fulfills the requirements in many
demanding long term applications from sound
reinforcement, paging or life safety installations.

The PA2450L features many of the same comprehensive
protection circuits typical in EV amplifiers. Complete
protection is provided for high temperature, audio limiters,
power up delay and peak current limiters. In addition to the
rated output power, the PA2450L provides excellent
headroom for a wide dynamic range on music signals. The
onboard dynamic limiter ensures that the output clipping of
the PA2450L will not will not generate excessive distortion.
The amplifier channels can be bridged for more power
flexibility.

Marked level controls on the rear panel provide hidden
reliable level adjustments for each channel. Front panel
LEDs indicate signal present, 0 dB, and limit. Phoenix type
connectors for inputs and outputs provide an easy rack wiring.

PA2450L

Tw o-Channel

Power Amplifier

Technical Specifications:

slennahCforebmuN2
ecnadepmIdaoLmhO8mhO4

)daoLdetaR*(rewoPtuptuOdetaR

zHk1,%1<DHT

)daoLdetaR*(rewoPtuptuOdetaR

zHk02…zH02,%2.0<DHT
zHk1taetaRwelSsµ/V82
zHk1.feR,Bd1-,esnopseRycneuqerFzHk04-zH01<

,zHk1/zH001ta,rotcafgnipmaD

mhO4

.feR,%1=DHThtdiwdnaBrewoP

rewoPflaH,zHk1

,zHk02...zH02,ecnadepmItupnI

decnalaB
dethgieW-A,oitaResioN-ot-langiSBd401

tuptuOdetaRtaytivitisneStupnI

zHk1,egatloVrorewoP

,rewoptuptuodetartaDHT

zHk1,zHk08=WBM
zHk7,zH06,ETPMS-DMI%1.0<
zHk51,zHk51.3,03MID%1.0<
detaR%01ta,zHk1.feR,klatssorC

rewoPtuptuO

stnemeriuqeRrewoP-zH05,V032roV021

noitcetorPsretimiLoiduA

gnilooCraeR-ot-tnorF

mm,)DxHxW(snoisnemiD

thgieW)sbl43.63(gk5.61

Low Impedance Outputs:

- Min. Rated Load for Single Channel Operation is 4 Ohms. 2 Ohm Load is Not Recommended.

- Min. Rated Load for Bridged Operation is 8 Ohms. 4 Ohm Load is Not Recommended.

W022W054

W002W004

052>

zHk05>-zH01>

mhOk02>

)Vm577(uBd0

%1.0<

Bd57-<

zH06

erutarepmeThgiH

yaleDnO-nruT

"61x"5.3x"91

sretimiLtnerruCkaeP

)uR2(mm604x88x384

Block Diagram:

Dimension Drawings:

All Dimensions

in Millimeters

Rear View:

Top View

Front View

P A2450L Part Number:

PA2450L, 120V -- D170408

12000 Portland Avenue South, Burnsville, MN 55337
Phone:[phone], Fax:[phone]

www.electro voice.com

© Telex Communications, Inc. 1/2006

Part Number LIT -0000XX Rev 1

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: [phone]

Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265

Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 736-4212

For warranty repair or service information, contact the Service Repair department at:

800/685-2606

For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.