Electro-Voice N/D267, N/D267S Quick Start Manual

N/D267
N/D267S

N/DYM® Dynamic
Cardioid Performance
Microphones

• Cardioid polar pattern for superior
feedback rejection and acoustic
isolation

• Large diaphragm for extended
frequency response

• Superior multistage shock mount
for unmatched low handling noise

• Handles high SPL's without
distortion

• “On/Off” switch (N/D267S)

Description

The Electro-Voice N/D267, part of a new
generation of N/DYM
signed for high-quality vocal use in live­sound and home-recording situations. The
N/D267 is a member of a family of micro­phones that are manufactured with refine­ments that enhance sonic smoothness, im­prove gain-before-feedback, and provide
more consistent performance with greater
durability than earlier generations of
N/DYM
acoustic response is tuned to achieve an ex­tended frequency range with improved tran­sient response, presenting clear lead and
background vocals without the need for ex­cessive equalization. Where exceptional
vocal clarity is desired, the N/D267 is the
microphone of choice.

As in all N/DYM
features EV’s outstanding neodymium-iron­boron magnetic structure to provide greater
sensitivity and an exceptional signal-to-noise
ratio. In addition, the N/DYM
ometry, combined with a lar ge reinforced dia­phragm design, produces a smooth, extended
frequency response with a warm, open and
transparent sound quality normally found only
in studio-quality microphones.

®

microphones. The N/D267’s

®

microphones, is de-

®

microphones, the N/D267

®

magnet ge-

N/DYM
AcoustiDYM™ shock-mount system. This
unique vibration isolating system works as a
multistage device. At low frequencies, a rear
sound wave cancels the diaphragm motion
while, at high frequencies, the specially

designed rubber shock mount isolates
the transducer from motion. Combining
AcoustiDYM™ with the elastomeric W arm­Grip™ handle and the windscreen bumper
produces an advanced technology, vibration
isolating system which dramatically reduces
all forms of handling noise for the most de­manding situations.

The N/D267 employs a cardioid polar pat­tern, providing enhanced front-area sensitiv­ity and accoustic rejection directly behind
the microphone, reducing feedback under
live performance conditions. This is particu­larly useful with typical monitor speaker
placement and high sound pressure level
(SPL) requirements. Additionally, the
N/D267’s polar patterns are unusually uni­form with frequency, ensuring superior gain­before-feedback in live applications and su­perior isolation when used in the studio.

The N/D267 pop filter’s unique design uti­lizes a specially processed Acoustifoam
ter to minimize wind noise and vocal P-pops.

®

microphones feature EV's

TM

fil-

This design makes the pop filter an integral
part of the microphone’s removable front
grille assembly, allowing easy cleaning for
continued top performance. The N/D267S
has the added feature of an easily accessible
“on/off” switch.

Operation

The N/D267’s low-frequency response var­ies with the distance of the sound source to
the microphone. This is known as “proxim­ity effect.” Maximum bass response is pro­duced in close-up use with the microphone
1/4 inch from the sound source. Minimal
bass response is experienced at distances
greater than 24 inches. By working closer
to the microphone, the human voice will
sound more robust. W orking the microphone
close-up will also reduce the potential for
feedback from a P A sound system. This ben­efit is in addition to the feedback-reducing
cardioid polar pattern. When close-talked,
the substantial bass boost provides an in­crease in overall microphone output level.
The mixer gain may be proportionately
reduced, resulting in a reduction of the
system’s sensitivity to feedback caused by
sound entering the microphone from the
loudspeakers.

N/D267 and N/D267S Cardioid Performance Vocal Microphones

The dynamic element of the N/D267 will
provide reliable operation in extreme tem­perature, humidity and other adverse condi­tions that would render typical condenser mi­crophones useless. These N/D267 features
will provide years of trouble-free operation.

Certified Performance

Every N/D267 is inspected by a quality
control tester and subjected to a computer­controlled test system that verifies numer­ous performance parameters. After the perfor­mance meets or exceeds our rigorous stan­dards, the actual measured frequency re­sponse is plotted on a "Certificate of Per­formance" and included with the microphone.
Certified performance may vary from pub­lished "A verage Response." This certificate
guaranties that each N/D267 will perform
to exacting standards of the 100% qual-
ity assurance testing, established by EV's
design engineers.

Limited Warranty

Electro-Voice products are guaranteed
against malfunction due to defects in ma­terials or workmanship for a specified
period, as noted in the individual product­line statement(s) below, or in the individual

N/D267 and N/D267S Cardioid Performance Vocal Microphones

product data sheet or owner’s manual,
beginning with the date of original pur­chase. If such malfunction occurs during
the specified period, the product will be

repaired or replaced (at our option) with­out charge. The product will be returned to
the customer prepaid. Exclusions and
Limitations: The Limited Warranty does
not apply to: (a) exterior finish or appear­ance; (b) certain specific items described
in the individual product-line statement(s)
below, or in the individual product data
sheet or owner’s manual; (c) malfunction
resulting from use or operation of the prod­uct other than as specified in the product
data sheet or owner’s manual; (d) mal­function resulting from misuse or abuse of
the product; or (e) malfunction occurring
at any time after repairs have been made to
the product by anyone other than EVI Audio
Service or any of its authorized service
representatives. Obtaining Warranty Ser-
vice: To obtain warranty service, a
customer must deliver the product, pre­paid, to EVI Audio Service or any of its
authorized service representatives together
with proof of purchase of the product in
the form of a bill of sale or receipted
invoice. A list of authorized service repre­sentatives is available from EVI Audio
Service at 600 Cecil Street, Buchanan, MI
49107 (800/685-2606 or FAX
616/695-4743). Incidental and Conse-
quential Damages Excluded: Product repair
or replacement and return to the customer
are the only remedies provided to the cus­tomer. Electro-Voice shall not be liable for
any incidental or consequential damages
including, without limitation, injury to per-

sons or property or loss of use. Some states
do not allow the exclusion or limitation of
incidental or consequential damages so
the above limitation or exclusion may not
apply to you. Other Rights: This war-
ranty gives you specific legal rights, and
you may also have other rights which vary
from state to state.

Electro-Voice Wired Microphones are
guaranteed against malfunction from any
cause for two (2) years from the date of
original purchase. In addition, the Limited
Warranty for the acoustic system con­tained in these microphones shall apply
for the life of the product, defined as a
period of ten (10) years from the date that
the manufacture of the specific micro­phone has been discontinued. Any and all
active electronics incorporated in these
microphones are guaranteed against mal­function due to defects in materials or
workmanship for a period of three (3)
years from the date of original purchase.
The Limited Warranty does not extend to
cables, cable connectors, or switches. Ad­ditional details are included in the Uniform
Limited Warranty statement.

For technical assistance, contact Techni­cal Support at 800/234-6831 or
616/695-6831, M-F, 8:00 a.m. to 5:00 p.m.
Eastern Standard time.

Specifications subject to change without
notice.

2