Electronics 179-AC User Manual

* MODEL 179 MagnaValve *

* On - Off Valve
* No moving parts
* No air cylinders
* Steel shot/grit
* Fail Safe permanent
magnet construction

The Model 179 MagnaValve is a normally closed magnetic valve typically used
to replenish shot hoppers with cast steel shot or cut wire shot.

The valve construction includes a permanent magnet for normally closed
operation and an electromagnet to activate shot flow. By applying power to the
electromagnet, a full flow condition may be achieved. When power is off, the
valve will hold shot due to the permanent magnet.

ELECTRONICS INCORPORATED

* Normally closed
* 100 lbs./min.
*110Vacor
*24Vdc

www.magnavalve.com

SHOT PEENING CONTROL TECHNOLOGY

179_ac_dcDATA.CDR 02/22/2003

* MODEL 179 MagnaValve *

SPECIFICATIONS

VALVE

Input : 80-125VAC @ .25A or

23-25 Vdc @ .2A
Output : 100 lbs./min.
Media: Steel shot
Mode: Normally closed
Temp. Range : 32 - 167° F

0 - 75°C

LED: Red for flow

4”

1¼"NPT
BOTH ENDS

3”

Note: The MagnaValve is designed to
operate in a vertical position and must
be mounted within 5 degrees of vertical.

Note: specify ac or dc
version with your order
Model 179DC p/n 999320
Model 179AC p/n 999321

2”

6”

3”

179_ac_dc_DATA.CDR 02/22/2003

56790 Magnetic Drive, Mishawaka, In. USA 46545 Phone [phone] FAX [phone]