Electrolux Z4700 User Manual
2 – 4
IMPORTANT INFORMATION
Upright Vacuum Cleaner
Owner’s Guide
Household Type
Z4700 Series
4
5
5 – 8
9 – 10
11
11
11
12
12
GUARANTEE
QUICK REFERENCE
HOW TO ASSEMBLE
HOW TO USE
ROUTINE MAINTENANCE
Empty Dust Cup
Clean Dust Cup Filter
PERIODIC MAINTENANCE
Brushroll
12
13 – 15
13
IMPORTANT
Please read these
instructions for
advice on the
maintenance of
your cleaner.
FILTER REPLACEMENT CODE: EF86b
13
14
Brushroll Belt
PROBLEM SOLVING
Clear Hose
Thermal Cut Off
Mini Turbo Nozzle
www.electrolux.co.uk
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
WARNING
To reduce the risk of re, electric shock, or injury:
IMPORTANT INFORMATION
• Do not use outdoors or on wet surfaces.
• Do not leave vacuum cleaner whilst plugged in. Turn off the switch and unplug the electrical cord when not in
use and before servicing.
• DO NOT PLACE CLEANER ON FURNITURE OR STAIRS AS THE BRUSHROLL MAY CAUSE DAMAGE.
Place cleaner on oor with the handle in the storage position while using attachments.
• This appliance is not intended for use by any persons (including children) with reduced physical, sensory or mental
capabilities, or a lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged,
left outdoors, or dropped into water, return it to a service centre before using.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
Do not run vacuum cleaner over cord. Keep cord away from heated surfaces.
• Do not use extension cords or outlets with inadequate current carrying capacity.
• Turn off all controls before unplugging.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or vacuum cleaner with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that
may reduce airow.
• This vacuum cleaner creates suction and contains a revolving brushroll. Keep hair, loose clothing, ngers, and all parts
of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without the dust cup or lter(s) in place.
•
Belt pulleys can become hot during normal use. To prevent burns, avoid touching the belt pulley when servicing the drive belt.
• Use extra care when cleaning on stairs.
• Do not use to pick up ammable or combustible liquids such as gasoline, or use in areas where they may be present.
• Store your cleaner indoors in a cool, dry area.
• Keep your work area well lighted.
• Unplug electrical appliances before vacuuming them.
PLEASE SAVE THESE INSTRUCTIONS
The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local city ofce, your household waste disposal service or
the shop where you purchased the product.
2
BEFORE YOU START
CHECK THE VOLTAGE
Before connecting the cleaner to an electrical supply, ensure that the voltage shown on the rating plate located beneath the cleaner
is of the correct voltage for your electricity supply. If it is not, do not use the cleaner but refer back to your dealer.
CONNECTING TO YOUR ELECTRICITY SUPPLY
Permanently connected to the cleaner is a mains supply (2-core) cable tted with a non-rewirable plug incorporating a 13A fuse.
In the event of the fuse requiring replacement the fuse cover should be removed using a small screwdriver. The old fuse MUST
be replaced by a 13A ASTA approved BS1362 fuse or a BSI approved fuse. The cover must be replaced before the plug is used
again. In the event of loss of the fuse cover, replacements can be obtained from your Electrolux Retailers and must be of the
same colour as indicated by the coloured insert on the base of the plug.
If difculty is experienced in obtaining a replacement, contact Electrolux Customer Services on 08445 614614. Calls to this number
will be charged at 5p per minute at all times from a BT Landline.
In no circumstances must the plug be used without a correct fuse cover tted.
If the plug that is tted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug tted.
Remove the fuse from the cut off plug.
The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a 13 amp socket
in another part of your home.
The wires in the mains cable of this appliance are coloured in accordance with the following code: Blue: Neutral. Brown: Live.
As the colours of the wires in the mains cable of this appliance may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
If using a three-pin plug, do not make any connection to the terminal marked with the letter E or by the earth symbol or coloured
green or green-and-yellow. This cleaner is double insulated and no earth connection is necessary.
It is in your interest to ensure that the plug is correctly attached to the mains cable. In case of doubt, consult a qualied electrician,
as Electrolux cannot regard the repair of faults on the plug connection as a service that can be given free of charge under the
terms of the guarantee.
Fuse
Cover
13 Amp Fuse
IMPORTANT INFORMATION
13 Amp
Fuse
Blue
Brown
Cord
Clamp
WARNING
The brush in the cleaning head rotates at high speed and can cause damage to the mains supply cable if the cleaner passes
over it during cleaning operations.
Care should be taken to ensure that this does not happen. If the cleaning head has accidentally passed over the mains supply cable
the following action should be taken:
1. Switch off and remove the plug from the socket outlet.
2. Examine the mains supply cable for damage (only after removing the plug from the socket outlet).
3. If the supply cord is damaged it must be replaced by a Electrolux Service Agent or similar qualied person in order to avoid a
hazard.
4. NEVER use the machine with a damaged mains supply cable.
Proprietary carpet conditioning and air freshening materials
After using proprietary carpet conditioning powders, it is recommended that the lters be changed. Some of these preparations contain
substances which, if left in the vacuum cleaner for extended periods, could damage the plastic mouldings which form the structure of
the cleaner.
Many air fresheners, household deodorants, sprays and polishes contain a highly ammable gas propellant.
Because of this, it is particularly important that these products are used strictly in accordance with the relevant manufacturer’s
instructions.
It is essential that none of the above products are sprayed directly into the vacuum cleaner or any of its lters, hose assembly, dustbag
chamber or dust cup.
Thermal Cut Off
This vacuum cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the cleaner switches off, push the
switch pedal once and unplug the cleaner. Check the cleaner for a possible source of overheating such as a full dust cup, a blocked hose or
clogged lter. If these conditions are found, x them and wait at least 30 minutes before attempting to use the cleaner. After the 30 minute
period, plug the cleaner back in and push the on/off switch On (I). If the cleaner still does not run, please call Electrolux Customer Care.
3
SERVICE
Should you require service on your Electrolux cleaner, please telephone Electrolux Customer Services on 08445 614614. Calls
to this number will be charged at 5p per minute at all times from a BT Landline. Before requesting service, please check
whether your problem is covered under Service Checklist (see below). Electrolux will arrange the uplift of the product for repair
should no local service agent be available.
New lter pads, brushrollers and drive belts can be obtained from Electrolux Retailers. If difculty is experienced in obtaining
spares, please contact Electrolux on 08445 614614. Calls to this number will be charged at 5p per minute at all times from
a BT Landline.
IMPORTANT INFORMATION
SERVICE CHECKLIST
• If your cleaner will not operate, check the plug connection, plug fuse and mains fuse.
• Never allow the dust cup to become so full that it impedes the airow, thus reducing the cleaning efciency of the machine.
The character of household dust and its effect on the airow through the machine may vary considerably. Fluffy dust allows
air to pass through readily whereas ne powdery dust or proprietary cleaning powders, pack tightly in the dust cup, offering
greater resistance to air ow and will reduce cleaning efciency if the cup becomes overloaded.
• Always store your cleaner and spare dust lters in a dry place.
• Renew the lter pads three or four times a year. This is essential to ensure continued high ltration of dust particles.
• Sucking up such items as stockings, clippings of cloth, sizeable pieces of paper, wrappings from cigarette packets or sweets
etc., may block the hose. Electrolux regrets that the clearing of blocked hoses cannot be regarded as service that can
be given free of charge, under the guarantee. Should a blockage occur, rst disconnect the cleaner from the electricity
supply, refer to section headed “Blockages.” If these operations are not successful, contact Electrolux on 08445 614614.
Calls to this number will be charged at 5p per minute at all times from a BT Landline.
• Never pick up hot cinders or lighted cigarette ends.
• Make certain that your cleaner does not come into contact with water or any other liquid. It is not designed as a wet
pick up cleaner, and must never be used on damp carpets or wet oors.
Important - If the supply cord is damaged it must be replaced by a Electrolux Service Agent or similar qualied person in order
Spares
New lters, brushrollers and drive belts can be obtained from Authorised Electrolux Dealers and electrical retailers. If difculty
is experienced in obtaining spares please call us on 08445 614614 (Calls to this number will be charged at 5p per minute at all
times from a BT Landline) or visit our website at www.shop.electrolux.co.uk
GUARANTEE
This guarantee is in addition to your statutory and other legal rights.
GUARANTEE
This product is for household use only.
Electrolux products are carefully designed, manufactured, tested and inspected and, in consequence, we undertake to replace or repair
any part found to be defective in materials or workmanship, within one year of delivery to the original purchaser, free of charge. You
may be required to take the product to your nearest service provider if the product requires attention during the rst year.
There are certain conditions which may invalidate this guarantee:
a. It is dependent upon the appliance being correctly installed and used in accordance with the Company’s instructions under normal
domestic conditions within the United Kingdom or the Republic of Ireland.
b. Service at all times must be carried out by an Electrolux Service Representative or authorised agent.
c. The guarantee may be invalidated by unauthorised repair or modication of the appliance.
d. You may be charged by Electrolux if you call for an engineer to resolve a problem that we believe is covered in the instruction booklet.
(example: blocked/dirty lters)
Electrolux does not accept liability for all defects arising from neglect, misuse or accident. This guarantee excludes such normal wearing
parts as drive belts, brushes and lters as the life of these depends upon the amount and nature of use.
Proof of purchase will be required before service under guarantee is provided. Please call 08445 614614 for assistance. Calls to this08445 614614 for assistance. Calls to this for assistance. Calls to thisCalls to this
number will be charged at 5p per minute at all times from a BT Landline.
IMPORTANT:
For future reference we suggest you record the following details here, and keep the receipt with the handbook as proof of purchase.
Purchased from ____________________________________________________
Date purchased __________________Model no __________________________
101 Oakley Road, LUTON, BEDFORDSHIRE, LU4 9QQ
Features of the Electrolux vacuum cleaner and accessories supplied with it are protected in Great Britain and abroad by Patents or Registered
Designs.
This appliance conforms with the requirements of the amended E.E.C. directive No. 89/336/EEC relating to electromagnetic compatibility
(EMC) CE.
Electrolux may introduce modications to their product from time to time, and consequently the details given in this booklet are subject to
alteration without notice.
4
Quick Reference
A
B
QUICK REFERENCE HOW TO ASSEMBLE
C
E
F
A Wand
B Crevice Tool
C Dusting Brush
D Hose
E Base
F Dust Cup with Lid and Filter
G Handle ( G1 Turbo Handle)
H Tool Caddy
G
D
K
H
Stair Brush (some models only)
J
I
G1
I Rear Housing
J Hose Retainer
K Stair Brush
How To Assemble
CAUTION: Assemble the cleaner completely before using.
NOTE: All screws must be installed to properly secure the
parts of the vacuum.
CAUTION: Moving parts, make sure the on/off switch is in
the off position and stay clear of the brushroll
when plugging in.
NOTE: Features may vary by model yet all parts assemble
the same.
Remove all components from the carton and check that all of the parts
are available from the parts list above.
l
l
(NOT provided in the package)
L1
L2
Have a Phillips screwdriver available (one is NOT provided in the
package).
5
Loading...