|
|
ITEM # _______________________________________________ |
||
|
|
MODEL # _____________________________________________ |
||
|
Warewashing |
PROJECT NAME # ______________________________________ |
||
Hot Water Sanitizing Pot and |
SIS # _________________________________________________ |
|||
Pan Washer – 34.50″ WT830 |
AIA # _________________________________________________ |
|
||
|
|
|
|
|
|
|
Main features |
||
|
|
|||
|
|
• Built in booster heater sized to raise incoming 120 °F water to 180 °F for |
||
|
|
sanitizing rinse. No external booster heater required. |
||
|
|
• Unique temperature interlock guarantees required sanitizing temperatures |
||
|
|
thereby ensuring that NSF mandated temperatures are maintained. |
||
|
|
• Built in booster combined with the rinse booster pump for perfect rinsing |
||
|
|
performance in terms of sanitization, energy savings (water temperature |
||
|
|
always constant during rinse cycle), independent from water pressure of the |
||
|
|
network. |
||
|
|
• Requires only 1.6 gallons of water per cycle. |
||
|
|
• 4 washing programs 6, 10 or 15 minute as well as continuous wash cycle. |
||
|
|
• Maximum 10 cycles per hour on 6 minute cycle. |
||
|
|
• 304 stainless steel construction to include frame, wash tank, booster tank |
||
|
|
and side panels. |
||
|
|
• Revolving stainless steel wash/rinse arms above and below the rack. |
||
|
|
• Wash and rinse arms easy to remove without the use of a tool. |
||
|
|
• Wash water pressure can be regulated between top and bottom wash arms. |
||
|
|
• Side washing arms for extra washing performance. |
||
|
|
• Side washing arms, easily removable for cleaning. |
||
|
|
• Smooth surfaces and wash tank with rounded corners to facilitate cleaning. |
||
Warewashing |
|
• Primary and secondary strainers for enhanced particle filtering, easy to |
||
Hot Water Sanitizing Pot and |
remove without having to remove wash and rinse arms. |
|||
Pan Washer – 34.50″ WT830 |
• Self cleaning cycle. |
|||
506029 (WT830M208U) |
Electric Pot and Pan Washer |
• Easy access to wash chamber thanks to 180° front opening door. |
||
|
34.50″– 208 V |
• Requires limited space for opening thanks to the cantilevered 2 part door. |
||
506030 (WT830M240U) |
Electric Pot and Pan Washer |
|||
• Double skin construction with sound insulation for quiet operation. |
||||
|
34.50″– 240 V |
|||
|
• State of the art electronic controls with built in programming, self |
|||
|
|
|||
|
|
|||
Short Form Specification |
diagnostic for serviceability. |
|||
• Digital read out keeps operator informed as to cycle status and |
||||
|
|
temperatures. |
||
|
|
|||
Item No. ___________________________________ |
• Element protection from dry fire and low water. |
|||
Unit to be Electrolux WT830 Hot Water Sanitizing Pot and Pan |
• Pre arranged for automatic detergent dispensers. |
|||
Washer. Electrical characteristics to be ____ 208 V or ____ 240 V |
• Height adjustable feet. |
|||
three phase operation with three automatic cycles of 6, 10 and |
• Stainless steel basket for pots and pans included. |
|||
15 minutes using 1.6 gallons of fresh 180 °F final rinse water per |
||||
• Sheet pan insert included for 3 full size sheet pans. |
||||
cycle. Rinse temperature and rinse pressure guaranteed by built |
||||
in hot water booster heater and built in rinse water booster pump. |
• Low noise level. |
|||
Washing performance is guaranteed by a 3.5 HP wash pump, |
||||
• 97% recyclable by weight. |
||||
upper and lower revolving washing spray arms as well as lateral |
||||
spray arms.Wash water pressure can be regulated between top |
|
|
||
and bottom washing arms. 304 stainless steel construction to |
|
|
||
include frame, wash tank, booster tank and side panels. |
|
|
||
Covered by Electrolux Platinum Star® Service Program two-year |
|
|
||
parts and one-year labor warranty, installation start-up and per- |
|
|
||
formance check-up after one year from installation. |
|
|
||
|
|
|
|
Approval: ___________________________________________
Electrolux Professional, Inc. www.electroluxusa.com/professional
3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789
<![endif]>Warewashing
<![if ! IE]><![endif]>WT830 ″50.34 – Washer Pan and Pot Sanitizing Water Hot
Front View
Top View
Side View
Warewashing
Hot Water Sanitizing Pot
and Pan Washer – 34.50″ WT830
Electric
Supply voltage: |
506029 |
208 V/3p/60Hz - 48A |
|
506030 |
240 V/3p/60Hz - 41A |
Total Watts: |
|
14.8 kW |
Booster heating elements: |
12 kW |
|
Tank heating elements: |
12 kW |
|
Wash pump size: |
|
3.5 hp |
Water
Water supply pressure: |
7.25 – 101 psi (50 – 700 kPa) |
Water supply temperature: |
120 °F (50 °C) |
|
Colder incoming water supply |
|
may lengthen wash cycle time. |
Water supply hardness: |
8 gpg (14 °fH max) |
Gallons per cycle: |
1.6 gallons (6.2 liters) |
Gallons per hour: |
10 gallons (38 liters) |
|
(6 minute cycle)) |
Initial fill water consumption: |
25 gallons (95 liters) |
Booster Capacity: |
4.8 gallons (18 liters) |
Tank Capacity: |
25 gallons (95 liters) |
Incoming water line size: |
0.75″ (19.05 mm) |
Drain line size: |
1.625″ ID (40 mm) free fall |
|
drainage |
Key Information
N° of cycles: |
4 |
(6, 10, 15 minute and continuous) |
Racks per hour: |
10 |
(6 minute cycle) |
|
6 |
(10 minute cycle) |
|
4 |
(15 minute cycle) |
Noise level: |
<70 dB |
|
Net weight: |
441 lb (200 kg) |
|
Shipping weight: |
606 lb (275 kg) |
|
Shipping width: |
44.06″ (1120 mm) |
|
Shipping height: |
86.63″ (2200 mm) |
|
Shipping depth: |
43.31″ (1100 mm) |
|
Shipping Volume: |
2.71 cu. ft. (95.69 m3) |
Predisposed for external detergent connections.
Warewashing Hot Water Sanitizing Pot and Pan Washer – 34.50″ WT 830
The company reserves the right to make modifications to the products without proir notice. All information correct at time of printing.
3-10-06