Electrolux WT66BL240 (534092) General Manual

ITEM # _______________________________________________
MODEL # _____________________________________________

Warewashing

66″ Single Tank Conveyor Dishwasher

with Built In Hot Water Booster WT66

Warewashing

66″ Single Tank Conveyor Dishwasher

with Built In Hot Water Booster WT66

534090 (WT66BL208) 66″ Conveyor Dishwasher with

Built in Booster. Left to Right - 208V

534091 (WT66BR208) 66″ Conveyor Dishwasher with

Built in Booster. Right to Left - 208V

534092 (WT66BL240) 66″ Conveyor Dishwasher with

Built in Booster. Left to Right - 240V

534093 (WT66BR240) 66″ Conveyor Dishwasher with

Built in Booster. Right to Left - 240V

Short Form Specification

Item No. ___________________________________

Unit to be Electrolux WT66 Hot Water Sanitizing 66″ single tank conveyor
dishwasher with built in hot water booster. Electrical characteristics to be
____ 208 V or ____ 240 V three phase operation. Unit to operate from ___
left to right or ____ right to left. Unit to feature atmospheric built in booster
system with built in rinse booster pump thus guaranteeing rinse pressure
during rinse cycle. Hot water booster temperature rise can be selected
during installation from three options, 40 °F rise (140 °F incoming water
temperature), 70 °F rise (110 °F incoming water temperature) or 100 °F
rise (80 °F incoming water temperature). Unit to include 22″ pre-wash zone.
Pre-wash zone with powerful 0.5 hp cold water pre wash. Unit to have two
conveyor speeds which can be selected from the control panel by the
operator, 130 racks/hour or 200 racks/hour. Maximum water consumption
at 200 racks/hour of only 83 gal/hour (0.4 gal/rack). Unit to feature large
heat and noise insulated front counter balanced door in pre wash and
wash/rinse sections for easy access of internal components. Powerful 2
HP wash pump and specially designed wash spray arms to guarantee
cleaning. Unit to feature as standard end of day self cleaning cycle. Drain
of water from the machine can be done through the control panel. Large
deep drawn 26 gal wash tank for extended wash sessions.

Covered by Electrolux Platinum Star® Service Program two-year parts
and one-year labor warranty , installation start-up and performance check­up after one year from installation.

3048424

Approval: ___________________________________________

PROJECT NAME #______________________________________
SIS # _________________________________________________
AIA # _________________________________________________

Main features

• Built in hot water booster (top mounted in wash/rinse section).

• Water booster temperature rise can be set on site during the installation of the
machine. 40 °F rise (140 °F incoming water temperature), 70 °F rise (110 °F
incoming water temperature) or
100 °F rise (80 °F incoming water temperature).

• Atmospheric booster system with air break.

• Built in rinse booster pump guarantees constant rinse pressure.

• Speed of conveyor can be set through the control panel by the operator.
130 racks/hr or 200 racks/hr.

• Large counter balanced inspection doors in pre wash and wash/rinse sections
allow unrestricted all round access to the wash and rinse area. Door is insulated
with injected foam. This adds strength as well as reduces noise and heat loss.

• Large filters sloping towards the front to the smaller pressed filter box for quick
removal. Filters feature holes smaller than the concave ant-block wash nozzles so
large food cannot enter and block the wash system. Filters easy to remove from
pre wash as well as wash/rinse sections.

• Adjustable feet for full access underneath the machine for cleaning.

• Push button self cleaning cycle of the wash and rinse zones for ease of “end of
day” cleaning.

• Wash chamber without internal pipes and therefore no hidden dirt traps.

• Pre wash chamber without internal pipes and therefore no hidden
dirt traps.

• Self draining wash pumps provide maximum hygiene with no smells and all
wash and rinse zones drain automatically at the push of a button.

• Powerful 0.5 HP pre-wash pump.

• Powerful 2 HP wash pump.

• Heavy duty stainless steel wash pump (impeller and housing).

• Pre wash section uses cold water so food remains are not “baked” onto the
plates.

• Deep drawn pressed 26 gal wash tank with fully rounded corners, sloped
towards the drain to prevent dirt build up provides fast drainage in only a few
minutes. Pressed wash tank with no welded points offer a guaranteed water
tight solution.

• Deep drawn pressed 11.8 gal pre wash tank with fully rounded corners.

• Dishwasher structure is held together with a solid 2″ × 2″ stainless steel tube
sub-frame to provide long term sturdiness.

• All main components made in heavy duty anti-corrosive 304 type stainless steel:
tanks, panels, pre wash, wash & rinse arms and caps, doors, front, handle, rear
and side-panels and rack transportation system.

• Pre wash, wash and rinse arms can be easily removed for cleaning.

• IPX5 (NEMA4) water protection ensures no damage from cleaning.

• Autostart/stop ensures that the machine runs only when a rack is passing
through it. This reduces both water and energy consumption.

• Internal curtains made of silastic material and are not affected by detergent or
heat.

• Electronic control panel features large display for reading of wash and rinse
temperatures.

• Low water consumption. At 200 racks per hour, the machine uses only
83 gal/hr (0.4 gal/rack).

• Machine predisposed for external detergent and rinse aid connections.

Included Accessories

• Vent cowls (left and right side).

• One open sided dishwasher rack for trays.

• Rack for cups.

• Rack for dinner plates.

66″ Single Tank Conveyor Dishwasher with Built In Hot Water Booster WT66

Warewashing

Electrolux Professional, Inc.

3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789

www.electroluxusa.com/professional

Warewashing

66″ Single Tank Conveyor Dishwasher

with Built In Hot Water Booster WT66

Electric

Supply voltage: 534090 208V/3ph/60Hz

534091 208V/3ph/60Hz

534092 240V/3ph/60Hz

534093 240V/3ph/60Hz

Dishwasher has three selectable hot water booster configurations
according to inlet water supply temperature.

Dishwasher requires two separate electrical service connections.
Connection 1 for Hot Water Booster; Connection 2 for running of the
machine (wash pump, tank heat, conveyor drive motor, rinse booster
pump, electronic control). Refer to the information below for Amp
requirements.

Booster 40 °F rise Electrical Characteristics

Hot Water Booster Amp Load Connection 1:

208 V/3p/60Hz 33.35A (12 kW)

240 V/3p/60Hz 28.9A (12 kW)

Wash Pump, Tank heat Amp Load Connection 2:

208 V/3p/60Hz 64A (21 kW)

240 V/3p/60Hz 57.5A (21 kW)

Total Amp Load: 208 V/3p/60Hz 97.4A (33 kW)

240 V/3p/60Hz 86.4A (33 kW)

Booster 70 °F rise Electrical Characteristics

Water

Inlet Water supply pressure: 22 – 102 psi (150 – 700 kPa)
Inlet Cold Water Supply Temperature

for pre wash section: 39-59 °F (4-15 °C)
Inlet Hot Water Supply Temperature for wash/rinse section

(booster size can be set on site during installation):

140 °F (60 °C)

with booster set as 40 °F rise.

110 °F (44 °C)

with booster set as 70 °F rise.

80 °F (27 °C)

with booster set as 100 °F rise.

Inlet Water supply hardness: 4 - 8 gpg (7-14 °fH) max
Incoming Cold Water line size

(pre wash): G 3/4″
Incoming Hot Water line size

(wash/rinse section): G 3/4″
Drain line size (pre wash section): G 1-1/2″
Drain line size (wash/rinse section): G 1-1/2″
Water consumption: Gallons/hr: 83.2 gal/hr (315 liters)
Water consumption/rack: 0.4 gal/rack (1.5 l/rack)
Pre wash temperature: < 105 °F (<40 °C)
Pre wash tank size: 11.8 gal (45 liters)
Pre wash pump power: 0.5 hp (0,37 kW)
Pre wash pump water flow: 39 gal/min (150 l/min)
Wash temperature: 160 – 172 °F (71-78 °C)
Wash tank size: 26 gal (100 liters)
Wash pump power: 2 hp (1.5kW)
Wash pump water flow: 118.9 gal/min (450 l/min)
Rinse temperature: 180 – 194 °F (82-90 °C)
Rinse pump power: 0.4 hp (0.32 kW)
Rinse pump water flow: 1.32 gal/min (5 l/min)
Hot water booster capacity: 6.2 gal (24 liters)
Initial fill Hot Water requirements: 32.2 gal (124 liters)
Initial fill Cold Water requirements: 11.8 gal (45 liters)

Hot Water Booster Amp Load Connection 1:

208 V/3p/60Hz 50A (18 kW)

240 V/3p/60Hz 43.3A (18 kW)

Wash Pump, Tank heat Amp Load Connection 2:

208 V/3p/60Hz 64A (21 kW)

240 V/3p/60Hz 57.5A (21 kW)

Total Amp Load: 208 V/3p/60Hz 114A (39 kW)

240 V/3p/60Hz 100.8A (39 kW)

Booster 100 °F rise Electrical Characteristics

Hot Water Booster Amp Load Connection 1:

208 V/3p/60Hz 66.6A (24 kW)

240 V/3p/60Hz 57.7A (24 kW)

Wash Pump, Tank heat Amp Load Connection 2:

208 V/3p/60Hz 64A (21 kW)

240 V/3p/60Hz 57.5A (21 kW)

Total Amp Load: 208 V/3p/60Hz 130.6A (45 kW)

240 V/3p/60Hz 115.2A (45 kW)

Exhaust Requirements

Unit supplied as standard with extended vent hoods
(can be removed during installation if not required).

Exhaust extraction not more than 160 CFM
Refer to installation diagram for minimum exhaust hood

installation height .

Key Information

Productivity racks per hour 200 racks / 3600 dishes
(max speed): (average 18 dishes per rack)

Productivity racks per hour 130 racks / 2340 dishes
(min speed): (average 18 dishes per rack)

Table to Table connection: 66″ (
Number of Tanks: 1
Height with door open: 83-7/16″ (2119 mm)
Charging hole size (width): 20-7/8″ (530 mm)
Charging hole size (height): 19-3/4″ (501 mm)
Net weight: 1012 lb (459 kg)
Shipping weight: 1210 lb (549 kg)
Shipping width: 74-7/16″ (1890 mm)
Shipping depth: 40-15/16″ (1040 mm)
Shipping height: 81-1/8″ (2060 mm)
Shipping volume: 143 cu.ft (4.05 m
Noise level: <70 dBA

Unit predisposed to accept external detergent dispensers, detergent
probes and rinse aid dispensers.

1676 mm)

3

)