Electrolux 534094, 534095, 534096, 534097, WT66 Specification Sheet

ITEM # _______________________________________________

MODEL # _____________________________________________

Warewashing

66″ Single Tank Conveyor Dishwasher

w/o Built In Hot Water Booster WT66

Warewashing
66″ Single Tank Conveyor Dishwasher

without Built In Hot Water Booster WT66

534094 (WT66CL208) 66″ Conveyor Dishwasher without

Built in Booster. Left to Right - 208V

534095 (WT66CR208) 66″ Conveyor Dishwasher without

Built in Booster. Right to Left - 208V

534096 (WT66CL240) 66″ Conveyor Dishwasher without

Built in Booster. Left to Right - 240V

534097 (WT66CR240) 66″ Conveyor Dishwasher without

Built in Booster. Right to Left - 240V

Short Form Specification

Item No. ___________________________________

Unit to be Electrolux WT66 Hot Water Sanitizing 66″ single tank
conveyor dishwasher without built in hot water booster. Electrical
characteristics to be ____ 208 V or ____ 240 V three phase operation.
Unit to operate from ___ left to right or ____ right to left. Unit to feature
built in rinse booster pump thus guaranteeing rinse pressure during rinse
cycle. Unit to include 22″ pre wash zone. Pre-wash zone with powerful

0.5 HP cold water pre wash. Unit to have two conveyor speeds which can
be selected from the control panel by the operator, 130 racks/hour or
200 racks/hour. Maximum water consumption at 200 racks/hour of only
83 gal/hour (0.4 gal/rack). Unit to feature large heat and noise insulated
front counter balanced door in pre-wash and wash/rinse sections for
easy access of internal components. Powerful 2 HP wash pump and
specially designed wash spray arms to guarantee cleaning. Unit to
feature as standard end of day self cleaning cycle. Drain of water from
the machine can be done through the control panel. Large deep drawn
26 gal wash tank for extended wash sessions.

Covered by Electrolux Platinum Star® Service Program two-year parts
and one-year labor warranty, installation start-up and performance check­up after one year from installation.

3048424

Approval: ___________________________________________

PROJECT NAME # ______________________________________

SIS # _________________________________________________

AIA # _________________________________________________

Main features

• Built in rinse booster pump guarantees constant rinse pressure.

• Speed of conveyor can be set through the control panel by the

operator. 130 racks/hr or 200 racks/hr.

• Large counter balanced inspection doors in pre wash and wash/

rinse sections allow unrestricted all round access to the wash and
rinse area. Door is insulated with injected foam. This adds strength
as well as reduces noise and heat loss.

• Large filters sloping towards the front to the smaller pressed filter box for

quick removal. Filters feature holes smaller than the concave ant-block
wash nozzles so large food cannot enter and block the wash system.
Filters easy to remove from pre wash as well as wash/rinse sections.

• Adjustable feet for full access underneath the machine for cleaning.

• Push button self cleaning cycle of the wash and rinse zones for ease

of “end of day” cleaning.

• Wash chamber without internal pipes and therefore no hidden dirt traps.

• Pre wash chamber without internal pipes and therefore no hidden

dirt traps.

• Self draining wash pumps provide maximum hygiene with no smells and

all wash and rinse zones drain automatically at the push of a button.

• Powerful 0.5 HP pre-wash pump.

• Powerful 2 HP wash pump.

• Heavy duty stainless steel wash pump (impeller and housing).

• Pre wash section uses cold water so food remains are not “baked”

onto the plates.

• Deep drawn pressed 26 gal wash tank with fully rounded corners,

sloped towards the drain to prevent dirt build up provides fast
drainage in only a few minutes. Pressed wash tank with no welded
points offer a guaranteed water tight solution.

• Deep drawn pressed 11.8 gal pre wash tank with fully rounded corners.

• Dishwasher structure is held together with a solid 2″ × 2″ stainless

steel tube sub-frame to provide long term sturdiness.

• All main components made in heavy duty anti-corrosive 304 type

stainless steel: tanks, panels, pre wash, wash & rinse arms and
caps, doors, front, handle, rear and side-panels and rack
transportation system.

• Pre wash, wash and rinse arms can be easily removed for cleaning.

• IPX5 (NEMA4) water protection ensures no damage from cleaning.

• Autostart/stop ensures that the machine runs only when a rack is passing

through it. This reduces both water and energy consumption.

• Internal curtains made of silastic material and are not affected by

detergent or heat.

• Electronic control panel features large display for reading of wash

and rinse temperatures.

• Low water consumption. At 200 racks per hour, the machine uses

only 83 gal/hr (0.4 gal/rack).

• Machine predisposed for external detergent and rinse aid connections.

Included Accessories

• Vent cowls (left and right side).

• One open sided dishwasher rack for trays.

• Rack for cups.

• Rack for dinner plates.

Optional Accessories

• Ventilation activation kit.

• Drain water tempering kit.

66″ Single Tank Conveyor Dishwasher without Built In Hot Water Booster

Warewashing

3225 SW 42nd Street, Fort Lauderdale, Florida, 33312 • Telephone Number: 866-449-4200 • Fax Number: 954-327-6789

Electrolux Professional, Inc.

www.electroluxusa.com/professional

Warewashing

66″ Single Tank Conveyor Dishwasher

without Built In Hot Water Booster WT66

Electric

Supply voltage: 534094 (WT66CL208) 208 V/3p/60Hz

534095 (WT66CR208) 208 V/3p/60Hz

534096 (WT66CL240) 240 V/3p/60Hz

534097 (WT66CR240) 240 V/3p/60Hz

Machine requires one electrical connection.

Max. Current absorbed: 208 V/3p/60Hz 64A (21 kW)

240 V/3p/60Hz 57.5A (21 kW)

Water

Inlet Water supply pressure: 22 – 102 psi (150 – 700 kPa)

Inlet Cold Water Supply Temperature
for Pre Wash Tank: 39-59 °F (4-15 °C)

Inlet Water Supply Temperature
Rinse circuit: 194 °F (90 °C)
Wash tank: 80 – 140 °F (27 – 60 °C)

Inlet Water supply hardness: 4 – 8 gpg (7-14 °fH) max
Incoming Cold Water line size

Pre wash: G 3/4″
Incoming Hot Water line size

Wash tank: G 3/4″
Rinse circuit: G 3/4″

Drain line size
Pre wash section: G 1-1/2″
Wash/rinse section: G 1-1/2″

Water consumption: Gallons/hr: 83.2 gal/hr (315 liters)
Water consumption/rack: 0.4 gal/rack (1.5 l/rack)

Pre wash temperature: < 105 °F (<40 °C)

Pre wash tank size: 11.8 gal (45 liters)
Pre wash pump power: 0.5 hp (0,37 kW)

Pre wash pump water flow: 39 gal/min (150 l/min)
Wash temperature: 160 – 172 °F (71-78 °C)

Wash tank size: 26 gal (100 liters)
Wash pump power: 2 hp (1.5kW)

Wash pump flow rate: 118.9 gal/min (450 l/min)

Rinse temperature: 180 – 194 °F (82-90 °C)
Rinse pump power: 0.4 hp (0.32 kW)

Rinse pump water flow: 1.32 gal/min (5 l/min)

Initial fill Hot Water requirements:

Initial fill Cold Water requirements: 11.8 gal (45 liters)

26 gal (100 liters)

Key Information

Productivity racks per hour 200 racks / 3600 dishes
(max speed): (average 18 dishes per rack)

Productivity racks per hour 130 racks / 2340 dishes
(min speed): (average 18 dishes per rack)

Table to Table connection: 66″ (

Number of Tanks: 1

Height with door open: 83-7/16″ (2119 mm)
Charging hole size (width): 20-7/8″ (530 mm)

Charging hole size (height): 19-3/4″ (501 mm)

Net weight: 1012 lb (459 kg)
Shipping weight: 1210 lb (549 kg)

Shipping width: 74-7/16″ (1890 mm)
Shipping depth: 40-15/16″ (1040 mm)

Shipping height: 81-1/8″ (2060 mm)

Shipping volume: 143 cu.ft (4.05 m
Noise level: <70 dBA

Unit predisposed to accept external detergent dispensers, detergent
probes and rinse aid dispensers.

1676 mm)

3

)

Exhaust Requirements

Unit supplied as standard with extended vent hoods
(can be removed during installation if not required).

Exhaust extraction not more than
Refer to installation diagram for minimum exhaust hood
installation height .

177 CFM (300 m³/h)

Warewashing

66″ Single Tank Conveyor Dishwasher

without Built In Hot Water Booster WT66

102 mm

7.00″

177 mm

4.00″

22.25″

566 mm

7.75″

196 mm

2.81″

72 mm

1.75″

44 mm

2.38″

60 mm

8.06″

204 mm

CW

559 mm

764 mm

DE DE

22.0″

30.06″

D

44.13″

1121 mm

1137 mm

44.75″

DE1

DE1

D

HW1

HW2

58.19″

1479 mm

DE

EC2

66.25″

1683 mm

EC1

40.81″

1037 mm

Front View

Min 15.75″

Min 400 mm

24.50″

623 mm

27.50″

698 mm

7.88″

200 mm

1.75″

44 mm

D

=Water drain

DE

= Detergent Dispenser

Connection

DE1

= Detergent Probe

EC1

= Electrical connection 1

EC2

= Electrical connection 2

CW

= Cold Water Inlet

HW1

Hot Water Inlet Rinse Circuit

HW2==

Hot Water Inlet Wash Tank

1.94″

4.56″

50 mm

116 mm

23.31″

592 mm

Top View

8.19″

209 mm

16.00″

406 mm

Min 15.75″

Min 400 mm

24.50″

623 mm

27.50″

698 mm

8.06″

205 mm

2.38″

60 mm

7.88″

200 mm

1.75″

44 mm

DE DE

EC1

40.81″

1037 mm

22.13″

562 mm

22.75″

578 mm

36.19″

920 mm

DE

EC2

41.38″

1052 mm

DE1

DE1

D

HW1

HW2

1683 mm

66.25″

CW

369 mm

493 mm

22.0″

559 mm

14.50″

19.44″

8.06″

204 mm

D

50 mm

Front View

4.00″

102 mm

7.00″

177 mm

22.25″

566 mm

1.75″

44 mm

D

= Water drain

DE

= Detergent Dispenser

Connection

= Detergent Probe

DE1

= Electrical connection 1

EC1

= Electrical connection 2

EC2

= Cold Water Inlet

CW
HW1

Hot Water Inlet Rinse Circuit

HW2==

Hot Water Inlet Wash Tank

1.94″

4.56″

116 mm

23.31″

592 mm

Top View

8.19″

209 mm

16.00″

406 mm

6.81″

174 mm

83.44″

2119 mm

 1.50″

39 mm

66.88″

1699 mm

22.13″

562 mm

3.44″

87 mm

12.75″

324 mm

57.00″

1447 mm

HW2

22.06″

560 mm

EC1

D

24.38″

619 mm

24.94″

633 mm

CW

31.75″

807 mm

EC2

15.56″

396 mm

3

4.81″

884 mm

DE

 1.50″

39 mm

HW1

13.38″

340 mm

3.13″

79 mm

6.75″

172 mm

7.50″

190 mm

534094 & 534096
Left to Right

Side View

6.81″

174 mm

83.44″

2119 mm

 1.50″

39 mm

66.88″

1699 mm

22.13″

562 mm

3.44″

87 mm

12.75″

324 mm

57.00″

1447 mm

HW2

560 mm

EC1

D

24.38″

619 mm

24.94″

633 mm

CW

31.75″

807 mm

22.06″

EC2

15.56″

396 mm

34.81″

884 mm

DE

 1.50″

39 mm

HW1

13.38″

340 mm

3.13″

79 mm

6.75″

172 mm

7.50″

190 mm

534095 & 534097
Right to Left

Side View

66″ Single Tank Conveyor Dishwasher

without Built In Hot Water Booster WT66

Recommended Table Connection and Fabrication

82.00″

2083 mm

74.00″

2.00″

52 mm

32.06″

814 mm

1880 mm

CENTER LINE MACHINE

4.00″

102 mm

4.00″

102 mm

16.00″

406 mm

Warewashing

27.75″

705 mm

21.25″

540 mm

OPENING

0.25″
7 mm

OPENING

7.50″

189 mm

270 mm

21.25″

540 mm

0.25″
7 mm

10.63″

8.25″

210 mm

8.00″

204 mm

CENTER LINE

MACHINE

FRONT OF

MACHINE

66.00″

1676 mm

TABLE TO TABLE

27.75″

705 mm

AVG INSIDE

TABLE WIDTH

SERVICE CLEARANCE

82.00″

2083 mm

OVERALL

34.00″

865 mm

RACK RAIL

HEIGHT

20.00″

508 mm

(BOTH SIDES)

8.00″

204 mm

SECTIONAL VIEW SHOWING

TABLE CONNECTIONS

0.63″

16 mm

1.50″

38 mm

USE SEALANT BETWEEN TABLE AND LIP
OF TANK TO PREVENT WATER LEAKAGE

69.38″

1761 mm

OVERALL

FRONT OF

MACHINE

1.75″

45 mm

2.25″

57 mm

1.50″

38 mm

TRACK AND TABLE MUST
BE AT SAME LEVEL

1.75″

45 mm

1.50″

38 mm

2.25″

57 mm

21.25″

540 mm

OPENING

MACHINE

CENTER LINE

1.75″ 1.75 ″

45 mm

45 mm

20.75″

0.75″

19 mm

527 mm

INSIDE TANK

HOLE LOCATIONS IN TURNED DOWN

PORTION OF TABLE

″

20.75
INSIDE TANK

8.25

210 mm

/527 mm

/533 mm

″

21.00
OPENING

0.88″

23 mm

8.00″

203 mm

2 HOLES
FOR BOLTING
TABLE TO TANK

″

8.00″

203 mm

AWG

AWG

The company reserves the right to make modifications to the products without prior notice.
All information correct at time of printing.

″″

66

″ Single Tank Conveyor Dishwasher

″″

without Built In Hot Water Booster WT66

1-8-08

Warewashing