Electrolux WM 100 B User Manual

35.292.570/0

WASHING MACHINE

INSTRUCTION BOOK

WM 100 B

35.292.570/0

GB

3

Installation

■

This appliance is heavy. Care should be taken when
moving it.

■

It is dangerous to alter the specifications or attempt to
modify this product in any way .

■

All packing and transit bolts must be removed before
use. Serious damage can occur to the product and to
property if this is not adhered to. See relevant section in
instructions.

■

Any plumbing work required to install this appliance
should be carried out by a qualified plumber or
competent person.

■

Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.

■

Care must be taken to ensure that the appliance does not
stand on the electrical supply cable.

■

If the machine is situated on a carpeted floor, please
adjust the feet in order to allow air to circulate freely .

■

The washing machine must be unplugged when
removing the interior transits bolts. Do not plug in the
appliance before finishing the removal of the transit
bolts and the fixing of the caps in the holes where the
security bolts were

Child Safety

■

This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the
controls or play with the product.

■

Pets and children have been known to climb into
washing machines. Please check your drum before use.

■

The glass door becomes very hot during the washing
cycle. Keep children away from the vicinity of the
appliance whilst it is in operation.

■

Keep all packaging well away from children.

■

Keep all detergents in a safe place out of children’s
reach.

During Use

■

Always unplug the appliance and turn off the water after use.

■

Do not overload the appliance. See relevant section in
instruction book.

■

Always look through the glass door to check if water has
drained before opening the door.

■

The user should always check that they have not left their
gas lighter (disposable or otherwise) in their clothing

■

Only wash fabrics which are designed to be machine
washed. If in doubt, consult the care label on the clothes.

■

Before washing, ensure that all pockets are empty and
buttons and zips are fastened. Avoid washing frayed or torn
articles and treat stains such as paint, ink, rust, and grass
before washing. Underwired bras must NOT be machine
washed.

■

Any objects such as coins, safety pins, nails, screws, stones
or any other hard, sharp material can cause extensive
damage and must not be placed into the machine.

■

Garments which have been in contact with volatile
petroleum products should not be machine washed. If
volatile cleaning fluids are used, care should be taken to
ensure that the fluid is removed from the garment before
placing in the machine.

■

Wash small items such as socks, laces, washable belts etc in
a washing bag or pillow case as it is possible for such items
to slip down between the tub and the inner drum.

■

Only use the advised quantities of fabric softener. Damage to
the fabric can ensue if you over-fill. Refer to the
manufacturer’s recommendations of quantities.

■

As some duvets and eiderdowns should be washed in large
commercial machines because of their bulk, please check
with the manufacturer of the item before washing in a
domestic machine.

■

Leave the porthole door slightly ajar between washes to
preserve the door seal.

■

Under no circumstances should you attempt to repair the
machine yourself. Repairs carried out by inexperienced
persons may cause injury or serious malfunctioning. Contact
your local Electrolux Service Centre. Always insist on
Electrolux genuine spare parts.

3

Important Safety Information

It is most important that this instruction book should be retained with the appliance for future reference.
Should the appliance be sold or transferred to another owner , or should you move house and leave the
appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to
know the functioning of the appliance and the relevant warnings.

This information has been provided in the interest of safety. Y ou MUST read it carefully before installing or
using the appliance.

4

Your New Washing Machine

Your new washing machine, meets all modern needs for effective treatment of laundry with low
water, energy and detergent consumption.

■

Automatic cooling of the wash water to 60°C

before draining, with the 90°C programme. This
reduces thermal shock to fabrics, helping to prevent
any creasing.

■

The special wool programme with its new delicate
wash system treats your woollens with extreme
gentleness.

■

The anti-unbalance device ensures that the washing
machine remains stable when spinning.

Ecological hints

To save water and energy and help protect the
environment, we recommend that you follow these
hints:

■

Adjust the quantity of detergent according to the
hardness of your water supply, the amount of
laundry and the degree of soiling.

■

Select an ECONOMY E programme for normally
soiled laundry.

■

A programme without prewash is sufficient for
normally soiled laundry.

In the interest of the
environment

■

Materials marked with the symbol are
recyclable.

■

Check with your local Council or Environmental
Health Office to see if there are facilities in your area
for re-cycling this appliance.

■

When the appliance is to be scrapped, cut off the
power supply cable and make the door closing
device unusable to prevent young children from
being trapped inside.

■

Help to keep your country tidy - use authorised
disposal sites for your old appliance.

How do we help to protect the environment?
We use recycled paper!

5

Contents

For the User

Important Safety Information

3

Your New Washing Machine

4

Description of the Appliance

6

The Control Panel

7

Operating sequence

8-11

Washing 4,5 kg of white cotton at 90 °C 8
Load the laundry 8
Measure out the detergent 8
Measure out the additive 8
Select the required programme 9
Start the machine 9
At the end of the programme 9

Washing 2 kg of mixed fabrics at 50 °C 10
Load the laundry 10
Measure out the detergent 10
Measure out the additive 10
Select the required option 10
Select the required programme 11
Start the machine 11
At the end of the programme 11

Washing Hints

12-14

Which detergent to use?.... 13

And in which form? 14
How much detergent and fabric softener? 14
Using a water softening agent 14

Wash Care Symbols

15

Washing Programmes

16-17

Maintenance and Cleaning

18-19
Descaling 18
After each wash 18
External cleaning 18
Cleaning the dispenser drawer 18
Cleaning the drawer recess 18
Cleaning the filter 19
The dangers of freezing 19

Something Not Working

20-21

Service & Spare Parts

21

Customer Care

21

Peace of Mind for Twelve Months

22

For the Installer

Installation Instructions

23

Technical Specifications

23
Unpacking 24
Positioning 25
Water inlet 25
Water drainage 26
Levelling 27
Special conditions 27
In the interest of the environment 27
Electrical connections 28
Permanent connection 28
Electrolux Service Force Addresses 29-30

Guide to use the Instruction Book

The following symbols will be found in the text to guide you throughout the instructions:

Safety instructions
Hints and tips

6

Description of the Appliance

1 Detergent dispenser drawer
2 “Mains-on” light
3 “Options” buttons
4 Programme guide
5 Program selector dial & ON/OFF switch
6 Door opening handle
7 Filter
8 Adjustable feet

Detergent dispenser drawer

Prewash
Main Wash
Fabric softener

AL035

7

The Control Panel

1 Detergent dispenser drawer

2 Mains-on light

This light illuminates when the appliance is operating.

3 RINSE HOLD button

Press this button to make the machine stop with water in
the drum after the synthetic or delicate wash cycles.
This prevents any creasing which may take place if the
clothes are left damp in the drum. When it is convenient
for you to empty the machine, simply press this button
again so that the machine can proceed to drain and short
spin, or turn the dial to the drain programme “14”. If
this button is not activated, the washing programmes
will end with a short spin.

Do not press this button for woollens: wool items
should be gently spun.

4 HALF LOAD button

Available for programmes 1 to 5.
Pressing this button before starting the programme there

will be one rinse less which saves energy and water.

5 ECONOMY E button

By pushing in this button prior to selecting wash
programmes “2” and “3”, you will obtain a reduction of
the temperature from 90˚C to 60˚C and from 60˚to
40˚C. This will ensure a substantial saving in electricity
consumption. Use ECONOMY E button when washing
fabrics which are lightly soiled.

6 Programme Guide

7 Programme Selector

To select the required program turn the control
clockwise until the marker on the top coincides with the
number of the required programme. If you pass the
required number NEVER TURN THE CONTROL
ANTICLOCKWISE just continue clockwise until the
required number is reached again.

8

Operating Sequence

Before your first wash, we recommend that you run a
cotton cycle at 60°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.

WASHING 4.5 KG OF WHITE COTT ON AT 90°C

Suppose you have 4.5 kg of heavily soiled laundry to
wash. It is white cotton and is suitable for high
temperature washing

1. Load the laundry

Open the door.
Place the laundry in the drum, one item at a time,
shaking out as much as possible. Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent recommended by
the manufacturer in a graduated cup and pour it into the
main wash compartment .
If you wish to carry out a prewash(*), pour detergent
into the compartment marked
(*) Prewash is available in programme “1”.

3. Add the fabric softener
(if required)

If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
«MAX» mark in the drawer).
Close the drawer gently

4. Select the required option(S)

Depress HALF LOAD button and/or ECONOMY E
button if required.

P0004

AL025

AL023

9

5. Select the requir ed pr ogr amme

Turn the programme selector dial CLOCKWISE to the
required programme.

6. Start the machine

Before starting up the machine check that:

■

the appliance is plugged in

■

the water supply taps are turned on

■

the door and the detergent dispenser drawer are

closed.
Pull the programme selector dial outwards
The operating pilot light will illuminate and the machine
will start operating

7. At the end of the programme

The machine stops automatically and the mains-on light
goes out.

The door is controlled by a safety device which releases
3 minutes after the end of the programme.

Before opening the door ensure there is no water in
the drum.

Switch the machine off by pushing in the programme
selector dial.

When the programme has finished, you are advised to
unplug the appliance and turn off the water taps.

Leave the door open to prevent the formation of mildew
and unpleasant smells.

1

AL040

1

AL041

10

WASHING 2 KG OF MIXEDF ABRICS AT 50 °C

Suppose you have 2 kg of MIXED FABRICS to wash.
They are rather delicate fabrics and should not be
washed at a high temperature.

1. Load the laundry

Open the door.
Place the laundry in the drum, one item at a time,
shaking out as much as possible. Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent recommended by
the manufacturer in a graduated cup and pour it into the
main wash compartment .

3. Add the fabric softener
(if required)

If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
«MAX» mark in the drawer).
Close the drawer gently.

4. Select the required option(S)

Depress RINSE HOLD button, if required

P0004

L025

AL023

11

5. Select the requir ed pr ogr amme

Turn the programme selector dial CLOCKWISE to the
required programme

6. Start the machine

Before starting up the machine check that:

■

the appliance is plugged in

■

the water supply taps are turned on

■

the door and the detergent dispenser drawer are

closed.
Pull the programme selector dial outwards
The mains-on light will illuminate and the machine will
start operating

7. At the end of the programme

The machine stops automatically and the mains-on light
goes out.

If you have depressed the RINSE HOLD button, the
machine will stop with the water left in the tub, to
prevent the fabric from creasing. To drain the water
release the same button ( the clothes will be gently
spun) or select programme “14”

The door is controlled by a safety device which releases
3 minutes after the end of the programme.

Before opening the door ensure there is no water in
the drum.

Switch the machine off by pushing in the programme
selector dial.

When the programme has finished, you are advised to
unplug the appliance and turn off the water taps

Leave the door open to prevent the formation of mildew
and unpleasant smells.

7

AL040

7

AL041

12

Washing Hints

Do NOT overload the machine. Weigh the laundry the
first few times you use the appliance.

The average weights of the most common items are
listed below as a guide:

1000g = 1 kg

Sheet 700-1000 g
Pillow case 100-200 g
Tablecloth 400-500 g
Serviette 50-100 g
Tea towel 70-120 g
Linen hand towel 100-150 g
Towelling hand towel 150-250 g
Towelling bath towel 700-1000 g
Bath robe 1000-1500 g
Man’s shirt 200-300 g
Apron 150-200 g

■

Load the laundry loosely alternating large items with

small ones.

■

Sort the laundry according to the type of fabric,

colour-fastness and how dirty it is.

■

Avoid washing unhemmed or torn items as they may

unravel.

■

Before washing, empty all pockets of small objects

which may have been left inside (coins, keys, screws

etc). as these could damage the drain pump.

■

When washing curtains, remove the hooks.

■

Close poppers and zips and fasten loose buttons.

■

It is essential to wash new coloured items separately

when washing for the first time.

■

When washing fabrics requiring different wash

temperatures together, always select the lowest

temperature.

■

White items should not be washed with coloured

items.

■

Very small items (handkerchiefs, ribbons, socks etc)

should be washed in a washing bag or a pillow case.

■

Use a good quality detergent suitable for automatic

washing machines.

■

Use the correct quantities of detergent.

■

For wool, use gentle detergent only in small

quantities.

■

Bleach is very corrosive; it should be used with care

and kept out of reach of children.

■

Some stains such as fruit, wine, grass, rust etc. are
difficult to remove and should be treated before
washing with specific products, which can be found
in most household shops. In some cases it may help
to soak the stain before washing with a special pre­soak product or biological detergent.

■

Only wool marked «Pure New Wool - washable,
preshrunk» can be washed in the machine using the
wool programme; other types of wool should be
washed by hand or dry cleaned.

■

If you have used the machine to wash, rinse or spin
only non-colour fast garments, there may be dye left
in the sump. To ensure any subsequent wash is not
contaminated with the dye, select and carry out a
rinse and spin programme, without any garments, to
ensure that any dye is removed from the sump.

■

Once you have finished using the machine, you are
advised to unplug it and turn off the water taps.

■

To avoid an excessive and damaging amount of
lather when washing net curtains, it is advisable to
wash large curtains singularly and take extra care
when measuring the detergent.

■

Should an excess of lather accidentally occur, switch
off the machine, select the spin programme which is
preceded by a drain cycle, to remove the lather and
then start the wash again.

Which detergent to use?....

To ensure you obtain the best wash results from your
appliance, it is important to use the right detergent in
your everyday wash, and only detergents recommended
for use in automatic machines.

To maintain the appearance of your clothes and
household textiles and to make them last longer you
should use different types of detergent for different
washes, whether for whites, colours or delicates.

Whites

We recommend the Ariel product range which is
biological and designed to provide excellent cleaning
and stain removal even at low temperatures.

Delicate Items

When washing delicates such as woollens, you should
use a product which is specially designed to care for
fine fabrics. Dreft Automatic is suitable for woollens
and other delicates.

Laundry Bleach

For additional stain removal you may wish to use a
product such as Ace Gentle Bleach which is used in
addition to your chosen detergent. Ace is suitable for all
washable fabrics including silks, woollens and
coloureds.

Non Biological

If you prefer to use a non biological detergent, which
does not contain enzymes we recommend Fairy. Fairy
provides good cleaning and stain removal.

Coloureds

For coloured items you should use a detergent which is
designed to clean while maintaining the original colour.
Ariel Color does not contain bleach and therefore helps
to preserve colours.

13

And in which form?

Not only are there different types of detergent, but they
are also available in different forms. Whether you
choose a powder or liquid in traditional or compact form
is down to personal choice.

Traditional Powders

Pour the powder directly into the dispenser drawer. Do
not sprinkle powder onto clothes in the machine drum.

Traditional Liquids

Liquid can be placed in the main wash compartment of
the detergent drawer marked with the symbol , start
the machine immediately upon placing the detergent in
the dispenser drawer.

Alternatively the detergent is measured into the specially
designed dosing device* which should be placed on top
of the laundry, and at the back of the machine drum.

Compact Powders and Liquids

Compact detergents (or concentrates as they are also
known) are available in liquid or powder form, and
generally require a smaller dosage. Follow the
manufacturer’s instructions to ensure the most
economical usage. Pour the detergent directly into the
dispenser drawer, or alternatively measure the detergent
into the specially designed dosing device* which should
be placed on top of the laundry, and at the back of the
machine drum.

*If you use a dosing device in a washer dryer,

please ensure the dosing device/ball is removed

before carrying out a drying programme.

Bounce conditioning sheets for use in a tumble dryer.
We recommend the conditioning sheets are pinned
(using a safety pin) to an article of laundry and placed in
the tumble dryer.

How much detergent and fabric
softener?

The amount to be used depends on:

the load:
if the detergent manufacturer does not make any

specification for small loads, use a third less for half
loads, and for very small loads only use half of the
amount of washing powder recommended for a full
load.

the degree of soiling of the washing:
for only lightly soiled washing use less washing

powder. Follow the instructions of the detergent
manufacturer.

the water hardness:
the harder the water, the higher the dosage!

Fabric Conditioners

These are ideal for improving “softness”, and also
reduce static cling on synthetics and make ironing easier.
They are available in two types:

For example Lenor liquid fabric softener, for use in the
washing machine/washer dryer. The liquid fabric
softener should be poured into the compartment marked
with the symbol .

Follow the manufacturer’s dosage instructions and never
exceed the MAX level.

Using a water softening agent

In hard water areas, the use of a water softening agent
can reduce the amount of detergent necessary. See
manufacturers recommendations.

14

15

Wash Care Symbols

Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct
programme on your washing machine.

WASHING SYMBOL

BLEACHING

IRONING

DRY CLEANING

TUMBLE DRYING

WASH ACTION FABRIC

Hot iron

Warm iron

Cool iron

Cotton, Linen, Viscose

Polyester mixtures, Wool

Acrylic, Nylon, Polyester

Important Notes

For best results, always use the dispenser drawer for dispensing detergents and liquid additives.Once the dispenser has
been filled, close it by pushing it in gently. This is particularly important if you are using fabric conditioner to avoid
the conditioner entering the machine prematurely.
When using liquid detergent and a prewash programme, place the detergent into the correct compartment in the
dispenser drawer, after the prewash has finished.

95

605040

40

P

Chlorine bleach may be used

May be tumble dried

with high heat setting

with low heat setting

A cross through any symbol means «DO NOT»

May be dry cleaned. Other letters and/or a bar beneath the circle will
indicate the required process to the dry cleaner.

Normal (Maximum)

Normal (Maximum)

White Cotton or Linen
without Special Finishes

Cotton, Linen or Viscose
without Special Finishes
Colour fast at 60°C.

Reduced (Medium)

Normal (Maximum)

Reduced (Medium)

Much Reduced (Minimum)

Hand wash only

Nylon, Polyester/Cotton, Viscose
with Special Finishes,
Cotton/Acrylic Mix.

Cotton, Linen or Viscose
Colour fast at 40°C but not 60°C.

Acrylics, Acetate, Triacetate, Wool
mixes, Polyester/wool blends.

Wool, wool mixtures, Silks

Do not machine wash

X

40

HALF
LOAD

16

Washing Programmes

Programmes for cotton and linen

Pre-wash&Whites

White cotton, for
example heavy soiled
garments, sheets,
household linen,
underwear, towels.

1

Prewash at 40 ˚C
Wash at 90˚C
4 rinses
Long spin at 1000 rpm

4.5 kg

Whites

White cotton, for
example normally soiled
garments, sheets,
household linen,
underwear, towels.

2

Wash at 90˚C
4 rinses
Long spin at 1000 rpm

4.5 kg

Whites+

ECONOMY E

White cotton, for
example lightly soiled
garments, sheets,
household linen,
underwear, towels.

2+ E

(*)

Wash at 60˚C
4 rinses
Long spin at 1000 rpm

HALF
LOAD

HALF
LOAD

4.5 kg

Wash programme

Degree of soil and type

of laundry

Programme dial

position

Description

Max.

load

Possible

options

Fast coloureds

Fast coloured cotton or
linen fabric, shirts,
underwear, towels.
(normally soiled)

3

Wash at 60˚C
4 rinses
Long spin at 1000 rpm

HALF
LOAD

4.5 kg

Fast coloureds+

ECONOMY E

Fast coloured cotton or
linen fabric, shirts,
underwear, towels.
(lightly soiled)

3 + E

Wash at 40˚C
4 rinses
Long spin at 1000 rpm

HALF
LOAD

4.5 kg

Non fast

coloureds

Non fast coloured cotton
or linen fabrics, shirts,
blouses, underwear.

4

Wash at 40˚C
4 rinses
Long spin at 1000 rpm

HALF
LOAD

4.5 kg

Hand Rinses

Separate rinse cycle for
hand washed garments.

5

4 rinses
Long spin at 1000 rpm

HALF
LOAD

4.5 kg

Spin 1000 rpm

Separate spin for cotton
and linen items

6

Long spin at 1000 rpm

4.5 kg

(*) This 60°C programme is the reference programme for the Energy label according to EEC Directive 92/75.

Water 67 litres
Energy 1.2 kWh
Time 125 minutes

Water filling:

Programmes 30˚-40˚C cold water filling
Programmes 50˚-60˚C hot and cold water filling
Programmes 90˚C hot water filling

17

Washing Programmes

Programmes for synthetics, delicates and wool

Mixed fabrics

Synthetic or mixed
fabrics, underwear,
coloured garments, non­shrink shirts, blouses.

7

Prewash
W ash at 50˚C
3 rinses
Short spin at 600 rpm (*)

2 kg

RINSE

HOLD

RINSE

HOLD

RINSE

HOLD

RINSE

HOLD

RINSE

HOLD

Wash programme

Degree of soil and type

of laundry

Programme dial

position

Description

Max.

load

Possible

options

Wool wash

Specially tested
programme for wool
garments

10

Wash at 40˚C
3 rinses
Short spin at 600 rpm

1 kg

Delicates

Delicate fabrics, for
example curtains.

11

W ash at 40˚C
3 rinses
Short spin at 600 rpm (*)

2 kg

Spin 600 rpm

Separate spin for
synthetics and delicates

13

Draining of water and
short spin at 600 rpm.

2 kg

Drain

For emptying out the last
rinse water in
programmes with Rinse
Hold option

14

Draining of water

-

Synthetics

40

Synthetic or mixed
fabrics, underwear,
coloured garments, non­shrink shirts, blouses.

8

W ash at 40˚C
3 rinses
Short spin at 600 rpm (*)

2 kg

Quick & Cool

30

Lightly soiled synthetic
or delicate items

9

W ash at 30˚C
3 rinses
Short

spin at 600 rpm

(*)

2 kg

Delicate Rinses

Separate rinse cycle for
hand washed garments

12

3 rinses (with fabric
softener if required)
Short spin at 600 rpm (*)

2 kg

(*) If the rinse hold button has not been depressed.

18

Maintenance and Cleaning

Before any maintenance or cleaning is carried
out you must DISCONNECT the appliance
from the electricity supply

Descaling

The water we normally use contains lime. It is a good
idea to periodically run a high temperature wash with
detergent or use a descaler in the machine. Do this
separately from any laundry washing, and according to
the manufacturer's instructions. This will help to prevent
the formation of lime deposits.

After each wash

Leave the door open for a while. This helps to prevent
mould and stagnant smells forming inside the appliance.
Keeping the door open after a wash will also help to
preserve the door seal.

External cleaning

Clean the exterior cabinet of the appliance with soap
and water only, and then dry thoroughly.
Clean the control panel using a damp cloth only.

Do not use abrasives

Cleaning the dispenser drawer

From time to time the washing powder and additive
dispenser drawer should be cleaned.
Remove the drawer by pressing the catch downwards
and by pulling it out. Flush it out under a tap, to remove
any traces of accumulated powder.

Cleaning the drawer recess

Having removed the drawer, use a small brush to clean
the recess, ensuring that all washing powder residue is
removed from the upper and lower part of the recess.
Replace the drawer and run the rinse programme for a
few minutes without any clothes in the drum.

AL021

AL033

P0185

19

Cleaning the filter

The water drain filter

A clean filter is important for the correct functioning of
the machine, and should therefore be cleaned after every
washing programme.

Open the filter door and place a container underneath to
catch any spillage. If the filter is blocked and the
machine is unable to drain you will need to drain the
water manually from the machine at this stage. To do
this, unhook the drain hose from the standpipe or sink
and hold the end of the hose over a bowl on the floor.
The water should drain by gravity into the bowl. When
the bowl is full, hook the hose back up and empty the
bowl. Repeat the procedure until water stops flowing
out.

Unscrew and remove the filter.
Clean carefully under a fast running tap.
Replace the filter turning now clockwise and tighten it.

Warning

When the appliance is in use and depending on the
programme selected there can be hot water in the filter.
Never remove the filter during a wash cycle, always
wait until the appliance has finished the cycle, and is
empty. When replacing the filter, ensure it is securely
retightened so as to stop leaks and young children being
able to remove it.

The water inlet filters

If your water is very hard or contains traces of lime
deposit, the water inlet filters may become clogged.

It is therefore a good idea to clean it from time to time.
Turn off the water taps. Unscrew the water inlet hoses.

Remove and clean the filters using a hard bristle brush.
Replace the filters and tighten up the inlet hoses.

The dangers of freezing

If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.

■

Turn off the water taps.

■

Unscrew the inlet hoses.

■

Unhook the drain hose from the rear support and

position the end of this hose and that of the inlet

hose in a bowl. Run the draining programme.

■

Disconnect the appliance.

■

Screw the inlet hoses and reposition the drain hose.

■

When you intend to start the machine up again,

make sure that the room temperature is above 0°C.

AL012

AL015

AL017

P0090

0021

20

Something Not Working

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out
an engineer. Before contacting your Electrolux Service Force Centre, please carry out the checks listed below.

Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation
a charge will be made even if the appliance is in guarantee.

Symptom

The machine does not start

Possible causes

■

The door has not been closed.

■

The plug is not properly inserted in the power socket.

■

There is no current at the socket

■

The main fuse has blown.

■

The selector dial is not correctly positioned and pulled out

■

No water is entering the machine (see: the machine does not fill)

The machine does not fill

■

Ensure the water taps are open and the water supply has not been disconnected

■

The filter in the inlet hoses are blocked.

■

The inlet hoses may be squashed or kinked.

■

The water pressure is too low

The machine fills then empties
immediately

■

The end of the drain hose is too low.

■

The end of the drain hose is submerged in water.

■

There is no vent in the end of the drain hose.

The machine does not empty and/or
does not spin

■

The drain hose may be squashed or kinked

■

The RINSE HOLD option has been selected.

■

The drain filter may be blocked

■

The drain hose extension is not correct. Follow the instructions for
connecting to the waste.

■

The drainage system pipes are blocked.

There is water on the floor

■

Too much detergent or unsuitable detergent has been used (creates too
much foam).

■

Check whether there are any leaks from one of the inlet hose fittings. It
is not always easy to see this as the water runs down the hose; check to
see if it is damp.

■

The drain hose may be damaged or not securely positioned.

■

The detergent dispenser drawer or recess is clogged.

■

The drainage system pipes are blocked.

Unsatisfactory washing results

■

Too little detergent or unsuitable detergent has been used. An
insufficient amount of detergent leaves the laundry looking grey and
causes lime scale to form.

■

Stubborn stains have not been treated prior to washing

■

The correct temperature to suit the wash programme has not been
selected.

■

Too much laundry has been placed in the drum.

The machine vibrates or is noisy

■

The internal packing has not been removed.

■

The machine is in contact with the wall or furniture.

■

The machine is not level.

■

The washing load is badly distributed in the drum.

■

There is very little laundry in the drum.

■

The machine is overloaded

21

Service & Spare Parts

If you require an engineer or wish to purchase spare
parts contact your local Electrolux Service Force Centre
by telephoning:

0 8705 929929

Your telephone call will be routed to the Service Centre
covering your post code area.

When you call the Service Force centre please make
sure you give the model and serial number of the
appliance.

This information can be found on the rating plate (see
picture).

In-guarantee customers should ensure that the above
checks have been made as the engineer will make a
charge if the fault is not a mechanical or electrical
breakdown. Please note that proof of purchase is
required for any in-guarantee service calls.

Symptom

The door will not open

Possible causes

■

The programme is still running.

■

The door lock has not yet released

■

The water level in the drum is too high or the machine is heating.

Spinning starts late or the machine
does not spin

■

The electronic unbalance detection device has cut in because the
laundry is not evenly distributed in the drum. The laundry is
redistributed by reverse rotation of the drum. This may happen several
times before the load is evenly distributed and spinning can resume
eventually at a lower speed, if the wash load is still not sufficiently
balanced distributed, after 10 minutes, the machine will not spin. In this
case, redistribute the load manually and reselect the spin programme.

The machine makes an unusual
noise

■

The noise produced when spinning may differ from your previous
washing machine, which is due to the modern drive system. This new
motor ensures a softer start and more even distribution of the laundry in
the drum when spinning, as well as increased stability of the machine.

No water is visible in the drum

■

Machines based on modern technology operate very economically
using very little water without affecting performance.

If after the above checks, there is still a fault , call your local Service Force Centre.

Customer care

For general enquiries concerning your Electrolux
appliance or for further information on Electrolux
products, please contact our Customer Care Department
by letter or telephone as follows:

Customer Care Department
Electrolux
55-77 High Street
Slough
Berkshire SL1 1DZ
Tel: [phone]

Mod.

..........

Ser.

Mod. ..........

Prod. No. ...........

P0042

Ser. No. .........

Peace of Mind for Twelve Months

Electrolux standard guarantee
conditions

This guarantee is in addition to your statutory and other
legal rights.
We, Electrolux, undertake that if, within 12 months of
the date of the purchase, this Electrolux appliance or any
part thereof is proved to be defective by reason only of
faulty workmanship or materials, we will, at our option,
repair or replace the same FREE OF ANY CHARGE
for labour, materials or carriage on condition that:

■

The appliance has been installed correctly and used

only on the electricity supply stated on the rating

plate.

■

The appliance has been used for normal domestic

purposes only, and in accordance with the

manufacturer’s operating and maintenance

instructions.

■

The appliance has not been serviced, maintained,

repaired, taken apart or tampered with, by any

person not authorised by us.

■

All service work under this guarantee must be

undertaken by a Electrolux service representative or

authorised agent
Any appliance or defective part replaced shall become

our property.
Home visits are made between 8.30amand 5.30pm

Monday to Friday. Visits may be available outside these
hours in which case a charge will be made.

Exclusions

This guarantee does not cover:

■

Damage or calls resulting from transportation,
improper use or neglect, the replacement of any light
bulbs or removable parts of glass or plastic.

■

Costs incurred for calls to put right an appliance
which is improperly installed or calls to appliances
outside the United Kingdom.

■

Appliances found to be in use within a commercial
environment, plus those which are subject to rental
agreements.

■

Products of Electrolux manufacture which are NOT
marketed by Electrolux Ltd.

Electrolux European guarantee

If you should move to another country within Europe
then your guarantee moves with you to your new home
subject to the following qualifications:

■

The guarantee starts from the date you first
purchased your product

■

The guarantee is for the same period and to the same
extent for labour and parts as exists in the new
country of use for this brand or range of products

■

This guarantee relates to you and cannot be
transferred to another user

■

Your new home is within the European Community
(EC) or European Free Trade Area

■

The product is installed and used in accordance with
our instructions and is only used domestically, i.e. a
normal household

Before you move please contact your nearest
Customer Care Centre, listed below, to give them
details of your new home. They will then ensure that
the local Service Organisation is aware of your move
and able to look after you and your appliances.

France Senlis [phone]
Germany Nurnberg [phone]
Italy Pordenone [phone]
Sweden Stockholm [phone]
UK Slough [phone]

22

23

Installation Instructions

Technical Specifications

It is dangerous to alter the specifications or

attempt to modify this product in any way.
Care must be taken to ensure that the appliance

does not stand on the electrical supply cable.

Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.

Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.

DIMENSIONS Height 85 cm (33.5”)

Width 60 cm (23.6”)
Depth 55 cm (22.7”)

POWER SUPPLY VOLTAGE 230-240 V/50 Hz
MAX. POWER ABSORBED 2600 W (13A)

WATER PRESSURE Minimum (cold) 5 N/cm

2

(7 psi)

Minimum (hot) 3 N/cm

2

(4 psi)

Maximum 80 N/cm2(110 psi)

MAXIMUM RECOMMENDED LOAD Cotton, linen 4.5 kg (10 lbs)

Synthetics 2 kg (4.5 lbs)
Delicate fabrics 2 kg (4.5 lbs)
Wool 1 kg (2.2 lbs)

SPIN SPEED Maximum 1000 rpm

This appliance complies with the following E.E.C. Directives:

- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;

- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

24

Unpacking

All transit bolts and packing must be removed
before using the appliance

You are advised to keep all the packaging for re-use in
case the appliance has to be transported again.

■

Unscrew and remove the three rear transit bolts
(using a spanner).

■

Lay the machine gently on its back, making sure
that the hoses are not squashed.

We suggest a polystyrene angle bracket from the
packing is placed on the floor before tilting it back
to avoid the hoses being squashed.

■

Carefully remove the polyethylene bags located at
the base of the machine by pulling them toward the
centre of the machine.

■

Place the machine in an upright position and
remove the three plastic bolts.

■

Plug the 3 holes with the plastic plugs which you
can find in the envelope containing the instruction
booklet.

P

0287

0018

1

2

AL009

P0001

P0002

25

Positioning

Your new Electrolux washing machine has been
designed to be permanently plumbed in to your home’s
water supply and drainage system. However, if this is
not possible, it may be connected to suitable existing
taps, with the drain hose discharging into the sink.

The appliance has two inlet hoses, hot and cold, with
female 3/4” BSP thread connectors. If this connection
is not compatible with the plumbing of the existing
installation, a variety of connectors are available from
good hardware stores and plumbers merchants to suit
most domestic plumbing. Any alterations to your
existing plumbing must be carried out by a competent
person, or qualified plumber.

Water inlet

The inlets on the back of the appliance are colour coded,
blue for cold and red for hot.

Before connecting the hoses, be sure to fit the black
washers supplied as per diagram.

If only a cold water supply is available, connect the two
hoses to a cold water outlet by means of a ‘Y’
connection piece.

Installation should comply with local water authority
and building regulation requirements.

The appliance must be given a separate cold water
supply and not be connected to a mixer tap, a single
outlet water heater or a booster pump. A minimum
water pressure of 7psi is required for safe operation of
the appliance.

If you cannot make the cold water connection direct
from the rising mains, you may be able to operate the
appliance from your cold water storage system.

There should be a minimum distance of 5.02m (16
1/2ft) between the appliance’s inlet and the bottom of
the tank.

There will be sufficient pressure for the hot water
supply from the hot water cylinder if the height between
the appliance’s inlet and the bottom of the cold water
storage cistern (not between the appliance and the hot
water cylinder) is at least 2.74m (9ft).

Set the hoses correctly by loosening the ring nuts. After
positioning the inlet hoses, be sure to tighten the ring
nuts again to prevent leaks.

A

HOT WATER SUPPLY

COLD WATER SUPPLY

A

L013

P0021

26

Water drainage

This appliance is designed to be permanently plumbed
into your home's water supply and drainage system.

The appliance drain hose should hook (use the plastic
“U-piece” supplied) into a standpipe with an internal
diameter of approximately 38mm (see diagram) thus
ensuring there is an air break between the drain hose
and standpipe.

When discharging into a standpipe ensure that the top of
the curve in the hose end is no more than 90cm (35.4'')
and no less than 60cm (23.6'') above floor level. The
upright standpipe should have a minimum length of
30cm (12'') from the bottom of the elbow to the top of
the pipe (see diagram).

Make sure that it is designed in such a way, that the end
of the drain hose cannot be covered with water.

The drain hose may be extended to a maximum of 3
metres. An additional drain hose and joining piece is
available from your local Service Force Centre.

The joining piece must have an internal diameter of
18mm.

If you intend the drain hose to empty into a sink, make
sure that the sink is empty and the plug hose is not
blocked. Use the plastic “U-piece” supplied.

P1039

3 pin

Max. 90 cm.(35.4")

Min.60 cm.

(23.6")

P1040

Min. 30 cm.(12")

1

38 mm.(1/ ") diameter

2

standpipe

P0022

27

Le v elling

Level the washing machine by loosening or tightening
the feet. Once in the right position fix the feet by
pushing the nuts against the base of the case.

Accurate levelling prevents vibration, noise and
displacement of the machine during operation. After
levelling the machine, secure the feet by tightening the
ring nuts with the aid of a screwdriver.

Some vibration is inevitable, especially if mounted on a
wooden floor.

Sprung wooden floors are particularly susceptible to
vibration. For advice, consult a builder. If possible,
always place the machine on a solid floor.

Special conditions

If the floor is carpeted with a deep-pile carpet or
covered with crumbly or soft material, insert a rigid
support base under the feet to prevent noise, vibration or
displacement. The base should protrude a few
centimetres beyond the edges of the machine.

Warning

The machine should NOT be placed on deep pile

carpeting.

Note

Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.

In the interest of the
environment

Washing machines and dishwashers should be
connected to the FOUL drainage system, the water will
then be taken to a sewage works for treatment before
being discharged safely into a river.
It is essential that these appliances are not connected to
the surface water drainage system as this water is
discharged directly into a river or stream and may cause
pollution.
If you require any further advice please contact your
local authority drainage department.

P

P0254

0509

RAINWATER

'RUN-OFF'

SHOWER

BATH

WASHING
MACHINE

SINK TOILET

DISHWASHER

BIDET

FOUL DRAIN

P0987

SURFACE WATER

DRAINS & SEWERS

UNTREATED
DISCHARGE

RIVER

FOUL SEWERS

SEWAGE

TREATMENT

WORKS

TREATED

DISCHARGE

RIVER

28

Electrical connections

Any electrical work required to install this appliance
should be carried out by a qualified electrician.or
competent person

WARNING: THIS APPLIANCE MUST BE
EARTHED.

The manufacturer declines any liability should

this safety measure not be observed.

Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliace
rating plate(the plate is sticked to the rear of the
appliance).

The appliance is supplied with a 13 amp plug fitted. In
the event of having to change the fuse in the plug
supplied, use a 13 Amp BS1362 fuse. Only ASTA or
BSI approved fuses must be used.

Should the plug need to be replaced for any reason,
proceed as described below.

The wires in the mains lead are coloured in accordance
with the following code:

Green and Yellow - Earth
Blue - Neutral
Brown - Live
Connect the green and yellow (earth) wire to the

terminal in the plug which is marked with the letter «E»
or the earth symbol or coloured green and yellow.

Connect the blue (neutral) wire to the terminal in the
plug which is marked with the letter «N» or coloured
black.

Connect the brown (live) wire to the terminal in the plug
which is marked with the letter «L» or coloured red.

The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured insert
at the base of the plug.

A replacement cover/carrier must be obtained from your
local Electrolux Service Centre, whose address are listed
at the back of this instruction manual.

WARNING: a cut off plug inserted into a 13
amp socket is a serious safety (shock) hazard.

Ensure that the cut off plug is disposed of

safely.

Permanent connection

In the case of permanent connection it is necessary that
you install a double pole switch between the appliance
and the electricity supply (mains), with a minimum gap
of 3 mm between the switch contacts and of a type
suitable for the required load in compliance with the
current electrical regulations.

The switch must not break the yellow and green earth
cable at any point.

GREEN & YELLOW

E

13A

L

N

BROWN

BLUE

P1041

CORD CLAMP

ELECTROLUX SERVICE FORCE

29

ELECTROLUX SERVICE FORCE

30