Electrolux RS13RX2F User Manual
Technical Bulletin
Identification:
Bulletin no:
Date:
Issuer:
Factory:
Subject:
Model:
Problem:
Reason:
Action in
Factory:
Action in
Field:
E01-02-03-06-07-09
VTX2005-02
21-03-05
Customer Support Dept.
Pordenone (Italy)
Cabinets & Counters, Roll-in, BC-BCF
High rate of fully functional replaced parts
High sensitiveness to mechanical stress and humidity
Starting from week 11 2005 a new evaporator probe is used in all above mentioned ranges
Since the new evaporator probe can be retrofitted also on
previous models, in case of probe failure follow this procedure:
A. Heavy Duty, Prostore, Roll-in cabinets with SMART electronics:
Replace the evaporator probe looking in the spare parts
After the replacement, enter in the parameter list of the
B.
Heavy Duty, Prostore, Roll-in cabinets with digital control & all
counters:
Replace the evaporator probe looking in the spare parts
NEW EVAPORATOR PROBES
catalogue for the new probe (in the “notes” field you will
find written “starting from w11 2005”)
appliance and change the parameter TEAP from NTC2 to
NTC3.
catalogue for the new probe (in the “notes” field you will
find written “starting from w11 2005”)
ELECTROLUX PROFESSIONAL p. 1 of 2
VIALE TREVISO, 15 – 33170 PORDENONE – ITALY
TELEPHONE: TELEFAX: E-MAIL:
+ 39 0434 380 737 + 39 0434 380 740 lorenzo.giusti@electrolux.it
Technical Bulletin
Identification:
Bulletin no:
Date:
Issuer:
Factory:
Technical specifications:
New evaporator probe
E01-02-03-06-07-09
VTX2005-02
21-03-05
Customer Support Dept.
Pordenone (Italy)
Protection cover in stainless steel A304
IP index 68
NTC 10K Semitek made with SMD technology
Accuracy 1%
Old evaporator probe
099570 Length 2000 mm
099659 Length 2000 mm
099658 Length 1500 mm
099657 Length 1500 mm
099660 Length 3000 mm
099683 Length 4000 mm
099722 Length 4000 mm
ELECTROLUX PROFESSIONAL p. 2 of 2
VIALE TREVISO, 15 – 33170 PORDENONE – ITALY
TELEPHONE: TELEFAX: E-MAIL:
+ 39 0434 380 737 + 39 0434 380 740 lorenzo.giusti@electrolux.it
Loading...