![](/html/3c/3c4f/3c4f2d25450379d2af67e3399747501bfb0f672b0b146f86c1693ea41a447d96/bg1.png)
Identification:
Technical
Bulletin no:
Date:
Issuer:
Factory:
Subject
Model
Problem
Action in
Factory
D05
CGX2005-11 (page 1 of 1), 4th
14 October 2005
R. Sartor (DWS Customer Support)
DW Vallenoncello - Italy
Upper Jets Support for old UC, old FL, old HT and PW
Old electromechanical Undercounter LS5, old Frontal Loading LS7 / WT40,
old Hood Type medium capacity LS8 / WT50 and present Pot&Pan Washer
(both Manual and Automatic) PW1M-2M / WT830M-850M / WT830EA-850EA
The shaft can loose fitting.
The old support 046368 is no longer used and therefore no longer available as
spare part.
From serial number 52300001 we have introduced the assembly 0L0695
instead of support 046368 + shaft 048333 + o-ring 046376.
The new assembly has the shaft injected instead of screwed.
Action in
Field
The “new” assembly 0L0695 is perfectly interchangeable towards previous 3
parts together in following product families:
• LS7 / WT40 (PNC 5030xx ) – out of production
• LS8 / WT50 (PNC 5050xx) – out of production
• PW1M-2M / WT830M-850M (PNC 5060xx)
• WT830EA-850EA (PNC 5062xx)
While the “new” assembly” cannot be used in old electromechanical LS520521 (PNC 500xxx) because the shaft 046363 has a smaller diameter (10.5
mm vs. 14 mm). For these models, the old support 046368 has been replaced
by 0L0901 (+ shaft 048333 + o-ring 046376).
ELECTROLUX PROFESSIONAL SPA
MAILING ADDRESS TELEPHONE WEBSITE VAT NO.
VIA SEGALUZZA, 30
33170 PORDENONE - ITALY
OFFICE ADDRESS TELEFAX E-MAIL ADDRESS
VIA SEGALUZZA, 30
33170 PORDENONE - ITALY
++39 0434 380650 www.electrolux.com 00072220932
++39 0434 380636
++39 0434 385646
riccardo.sartor@electrolux.it