Electrolux RCDR3M09U User Manual

Identification:

Technical Bulletin:

Date:
Issuer:
Factory:

Subject

User Interface in UC, FL, HT and PW

D02-D03-D04-D05

CGX2007-24 (page 1 of 2)

19 December 2007
R. Sartor (DWS Customer Support)
CGX – Dishwashing – Pordenone (I)

Model

Undercounter LS5 / WT4 and LS6E / WT30E, Front Loading LU7 / WTU40,
Hood Type LS10EA-14EA / WT65E and Pot&Pan Washer PW1M-2M /
WT830M-850M / WT830EA-850EA.

Problem

Dead or not starting cycle.

Reason

Moisture or broken switch (push button)

Action in
Factory

From serial number 74900001 (for UC) / 75000001 (for FL, HT and Automatic
P&PW) we have introduced plastic box with embedded extensions for
switches:

Painted UI Tall switch Plastic actuactor

Painted UI + plastic box Short switch Integrated plastic actuactor

ELECTROLUX PROFESSIONAL SPA
MAILING ADDRESS TELEPHONE WEBSITE VAT NO.

VIA SEGALUZZA, 30
33170 PORDENONE - ITALY

OFFICE ADDRESS TELEFAX E-MAIL ADDRESS

VIA SEGALUZZA, 30
33170 PORDENONE - ITALY

++39 0434 380650 www.electrolux.com 00072220932

++39 0434 380636
++39 0434 385646

[e-mail]

Share more of our thinking at www.electrolux.com

Technical Bulletin (User Interface).doc

WHERE

PW1-2 / WT830-850

WT65

WT830EA-850EA

LS14EA

LS5 / WT4 &

LS6E / WT30E

(Until s/no. 52300099)

LS5 / WT4 &

LS6E / WT30E

(From s/no. 52400001)

LS9 / WT55 machines have not been involved in this change since their user
interface will be soon out of production (LS14 / WT65 and LS9 / WT55 will
have the same user interface).

OLD code

(RoHS compliant)

0L1240

0L1237

0L1242

0L1241

NEW code

(user interface + plastic box)

not available yet

0L1627

(UI 0L1566 + PB 0L1568)

not available

0L1626

(UI 0L1565 + PB 0L1567)

NEW code

(user interface only)

NEW code

(plastic box only)

Not available yet Not available yet

0L1566

(user interface only)

0L1568

(plastic box only)

not available not available

0L1565

(user interface only)

0L1567

(plastic box only)

LS5WS / WT4WS

LS9 / WT55

Action in
Field

0L1235

not available

not available not available

For time being the new user interface 0L1627 does not fit in Front Loading
Pot&Pan Washer machines because of interference with studs. A new frontal
panel will be soon released.

New user interfaces with plastic box are interchangeable towards old user
interfaces unless by taking away all plastic extensions 002670 and all brass
spacers 088653 from machines with old user interface.

Be aware that new user interfaces cannot be used without the plastic
box. Therefore new user interfaces without plastic box are NOT

interchangeable towards old user interfaces.

However you don’t need to replace user interface and plastic box in case of
failure so also spare part codes for new user interface without plastic box are
available (see table above).

Remove brass spacers to fit new

user interface with plastic box

Share more of our thinking at www.electr olux.c om

2