Electrolux RBC101 User Manual

ITEM #

MODEL #

NAME #

air-o-chill

SIS #

Blast Chiller

Crosswise - 28 kg

air-o-chill

AIA #

Main Features

•Load capacity: 28 kg in chilling.

•Will chill product from 90 °C to 3 °C or below in less than

90 minutes.

•Easy-to-use, electronic control panel. Fully programmable.

•Time or (automatic) core temperature controlled operation.

•Soft chill and Hard Chill.

•Auto hold at temperature reached at end of blast chilling

cycle.

•Turbo cooling: non-stop mode (working temperature: from

3 °C to -36 °C).

•Pre-programmed ice cream hardening cycles.

•Standard equipped with one 3-sensor temperature probe.

•Automatic Intelligent and manual defrost modes.

•Display: large LED for temperature and time/core

temperature read out.

•Audible alarms and visual indicators for food safety (HACCP)

issues and separate audible and visual for unit malfunctions.

•During cycle, temperature and time is monitored.

•EKIS software (pc-based HACCP monitoring) requires

optional board.

•On-board HACCP monitoring capable.

•R134 A gas in refrigeration circuit.

Blast Chiller Crosswise - 28 kg

726622 (RBC101)Blast Chiller - 28 kg 230

V/1p/50Hz

Short Form Specification

Item No.

Unit to be Electrolux air-o-chill® Blast Chiller Crosswise. Chilling load capacity to be 28 kg
from 90 °C to 3 °C in 90’ on up to 10 Steam table pans. Unit shall feature Micro-processor
controlled Soft-chilling and hard-chilling cycles. At the end of each Blast-chilling cycle the
unit shall automatically activate a holding cycle. Defrost cycle is automatically and
intelligently activated: ice build up on evaporator is automatically detected and defrost
activated to maximize performance efficiency. Manual activation of defrost cycle is possible.
Unit does not have any heat limitation and can accept food directly from oven at cooking
temperature. The unit features both time and core temperature controlled chilling cycles.
One core temperature probe is provided as standard, up to three are available. Internal and
external finishing in 304 Stainless steel construction. Self contained 3/4 hp air-cooled
compressor. High density HCFC polyurethane insulation material.
EKIS, pc-controlled HACCP monitoring software package available at additional cost.

Construction

•Magnetic, easy-to-remove heated gaskets.

•Standard equipped with 15 cm, adjustable legs, castors

available as option.

•304 AISI stainless steel construction throughout.

•Seamless hygienic inner cell with all rounded corners for

easy cleaning.

•Swing hinged front panel for easy service access to main

components.

•Self contained 3/4 hp compressor.

Included Accessories

•1 of 1 extra single-sensor probe for blast chiller

and blast chiller&freezers

Optional Accessories

•Kit for HACCP advanced connection for LW and

CW blast chiller&freezer

•Plastic coated grid 1/1GNPNC 881061 ❑

•Printer for HACCP basic version (only for

ecostore Touch models)

PNC 880213

PNC 880183 ❑

PNC 881532 ❑

Blast Chiller Crosswise - 28 kg

APPROVAL:

air-o-chill

Electrolux Professional

www.electrolux.com/foodservice

[e-mail]

air-o-chill

Blast Chiller

Crosswise - 28 kg

Front

Electric

Supply voltage:

726622(RBC101)230 V/1N ph/50 Hz
Connected load:1.1 kW
Circuit breaker required

Installation

Clearance:5 cm on sides and back.
Please see and follow detailed installation instructions provided with

the unit

Capacity

Max load capacity:28 kg

Key Information

Net weight:124 kg
Shipping weight:144 kg
Shipping height:1640 mm
Shipping width:760 mm
Shipping depth:760 mm

Top

Shipping volume:0.95 m³

Refrigeration Data

Compressor power:3/4 hp
Refrigerant type:R134a

ED=Remote electrical connection

EI=Electrical connection

RO=Remote unit connection

Side

Blast Chiller Crosswise - 28 kg

The company reserves the right to make modifications to the products

without prior notice. All information correct at time of printing.

air-o-chill

2010.07 .12