Electrolux RBC051 User Manual

air-o-chill

Blast Chiller

Crosswise - 10 kg

air-o-chill
Blast Chiller Crosswise - 10 kg

726658 (RBC051)Blast Chiller - 10 kg 230

Short Form Specification

Item No.

Unit to be Electrolux air-o-chill® Blast Chiller Crosswise. Chilling load capacity to be 10 kg
from 90 °C to 3 °C in 90’ on up to 6 Steam table pans. Unit shall feature Micro-processor
controlled Soft-chilling and hard-chilling cycles. At the end of each Blast-chilling cycle the
unit shall automatically activate a holding cycle. Defrost cycle is automatically and
intelligently activated: ice build up on evaporator is automatically detected and defrost
activated to maximize performance efficiency. Manual activation of defrost cycle is possible.
Unit does not have any heat limitation and can accept food directly from oven at cooking
temperature. The unit features both time and core temperature controlled chilling cycles.
One core temperature probe is provided as standard, up to three are available. Internal and
external finishing in 304 Stainless steel construction. Self contained 1/4 hp air-cooled
compressor. High density HCFC polyurethane insulation material.
EKIS, pc-controlled HACCP monitoring software package available at additional cost.

V/1p/50Hz

ITEM #

MODEL #

NAME #

SIS #

AIA #

Main Features

•Load capacity: 10 kg in chilling.

•Will chill product from 90 °C to 3 °C or below in less than

90 minutes.

•Easy-to-use, electronic control panel. Fully programmable.

•Time or (automatic) core temperature controlled operation.

•Soft chill and Hard Chill.

•Auto hold at temperature reached at end of blast chilling

cycle.

•Turbo cooling: non-stop mode (working temperature: from

3 °C to -36 °C).

•Pre-programmed ice cream hardening cycles.

•Automatic Intelligent and manual defrost modes.

•Display: large LED for temperature and time/core

temperature read out.

•Audible alarms and visual indicators for food safety (HACCP)

issues and separate audible and visual for unit malfunctions.

•During cycle, temperature and time is monitored.

•EKIS software (pc-based HACCP monitoring) requires

optional board.

•On-board HACCP monitoring capable.

•R134 A gas in refrigeration circuit.

Construction

•Magnetic, easy-to-remove heated gaskets.

•Standard equipped with 15 cm, adjustable legs, castors

available as option.

•304 AISI stainless steel construction throughout.

•Seamless hygienic inner cell with all rounded corners for

easy cleaning.

•Swing hinged front panel for easy service access to main

components.

•Self contained 1/4 hp compressor.

Optional Accessories

•Kit for HACCP advanced connection for LW and

CW blast chiller&freezer

•1 extra single-sensor probe for blast chiller and

blast chiller&freezers

•Plastic coated grid 1/1GNPNC 881061 ❑

•4 feet for undercounter blast chillerPNC 881493 ❑

•Printer for HACCP basic version (only for

ecostore Touch models)

•Pair of 1/1GN AISI 304 stainless steel gridsPNC 921101 ❑

•Kit HACCP EKISPNC 922166 ❑

PNC 880183 ❑
PNC 880213 ❑

PNC 881532 ❑

Blast Chiller Crosswise - 10 kg

APPROVAL:

air-o-chill

Electrolux Professional

www.electrolux.com/foodservice

[e-mail]

air-o-chill

Blast Chiller

Crosswise - 10 kg

Front

Electric

Supply voltage:

726658(RBC051)230 V/1N ph/50 Hz
Connected load:0.51 kW
Circuit breaker required

Installation

Clearance:5 cm on sides and back.
Please see and follow detailed installation instructions provided with

the unit

Capacity

GN:6 - 1/1 containers

Side

Max load capacity:10 kg

Key Information

Net weight:88 kg
Shipping weight:94 kg
Shipping height:850 mm
Shipping width:762 mm
Shipping depth:700 mm
Shipping volume:0.46 m³

Refrigeration Data

Compressor power:1/3 hp
Refrigerant type:R134a

ED=Remote electrical connection

EI=Electrical connection

RO=Remote unit connection

Blast Chiller Crosswise - 10 kg

The company reserves the right to make modifications to the products

without prior notice. All information correct at time of printing.

air-o-chill

2010.07 .12