Electrolux MAXI-FOLDER 1 DATASHEET

MAXI-FOLDER 1

LENGTH & CROSS FOLDER

Model 1:

1 feeding lane with 2 length folds (l ongitudinal) and 1,

2, 3 cross folds (transversal). 2 and 4 feeding lanes with 2 length folds (longitu dinal)

and NO cross folds (transversal) rear delivery.

! 3 feeding lane with 2 length folds (longitudinal) and

NO cross folds (transversal) rear delivery. Lateral stacker ADL for left or right han d side folded

items. Pre-selected number of stacked items.

Production:

! Working width: 3000 - 3300 mm

Category of item: Large flat items.

Can be used for small and medium-size flat items with

length folds only.

Operation:

Folding accuracy, reliability, simplicity of use and

easiness of maintenance are the main benefi ts of the Maxi-Folder.

! Length folding section: 2 or 3 le ngth folds on 1 lane

(3000 - 3300 mm) done by air jets between rever se rotating rollers. Cross folding section: 3 cross folds on 1 lane.

- The first cross fold is done by one blade (width 1000 mm) between reverse rotating rollers.

- The second and third cross folds are carried out by air blasts between reversing conveyors. Right or left hand side exit of folded items.

Features:

! The robust chassis is made with two 10 mm thick,

lateral steel panels. It minimizes vibrations. Transmission done by asynchronous m otor managed

by frequency control driving timing belts and using clutches.

! Automatic detection and measuring of items by

photoelectric cells. Designed with timing belts and clutches for a very

quiet operation.

! Piece counter on each cross fold lane.

! Buzzer and flashing light alarms in case of jam.

Automatic selection of folding programs according to

items’ sizes. Belts and antistatic system for smooth operation.

! Automatic torn/dirty item rejection directly after the

length fold.

! Automatic speed variation by means of frequency

converter (3 pre-set speeds). Each progr am can get 3 different speeds.

! Total by-pass of non-folded items. ! Possibility to by-pass items after the length fold for

rear exit delivery. Rear delivery table fo r non-folded items.

Conveyor belts as junction between the ironer and the

MAXI-FOLDER.

! Easy access to all vital components. ! Easy daily maintenance thanks to light side panels in

composite, easy to remove. Photoelectric cell cleaning system that can be

programmed at selected intervals.

! Easy to use control system managin g up to 20 folding

programs.

! Right or left hand side exit (should be specified with

order). Gangway on top of feeding belt.

Mounted on wheels.

Options:

! Third length (longitudinal) fold.

By-pass divided in 2, 3, 4, 5 l anes for small flat items

(compulsory for connection to SP COLLECTOR, FLIP-FLOP, and DUBLO).

! By-pass of first length fold (and by-pass of second

length fold when thi rd length fold option is a vailable). Speed synchronisation with ironer by means of

tachymeter. Safety device between fe eder and ironer

! Additional control panel installed in front of the ironing

or feeding set.

! Computer connection.

Double stacker ADU1 for single/double bed sheet

sort-out.

All product specifications can be modified at any time by Electrolux without notice

MAXI-FOLDER 1

LENGTH & CROSS FOLDER

Electrical connection 3000 - 3300

Voltage:

400V 3N AC 50Hz kW (A) 5.5 (25) 230V 3N AC 50Hz kW (A) 5.5 (25)

Compressed air connection

Air mm 12 Air pressure kPa 800 Air consumption NL/min 330

Sound level

Airborne sound level dB(A) < 70

Shipping data

Weight kg 3400 Static load Kg/cm² 1.5

Dimensions in mm

Overall width (with ADL) mm 5630 Overall depth (with ADL) mm 4200 Overall height mm 1800

Folds :

Length + cross fold

Length fold only

Lanes :

Large flat

Mid-size flat

Small flat

All product specifications can be modified at any time by Electrolux without notice