Electrolux HSPWTLR 865120, HSPWTRL 865121 Specifications

Page 1
Electrolux Handling System
Pre-rinse tunnel
Some Electrolux dishwasher models can perform their full potential, if properly combined with the Electrolux Handling System range. The modular system allows to design ergonomic and reliable solutions to handle, transport and sort kitchenware, obtaining the most effective flow in the dishwashing room. The wide range contains cord and slat conveyors for trays, manual and motorised sorting tables and a variety of roller and slide conveyors for baskets. The pre-rinse tunnel on this sheet is intended for automatic pre-rinsing of dishwashing racks with crockery and glasses.
865121
EASY TO INSTALL
• The pre-rinse tunnel is designed to be placed on a rack conveyor with deep basin or conveyor which is provided with strainer box.
• If placed immediately before a rack type dishwasher, there is the possibility to load automatically the racks, thanks to an extra feeding bar, dishwashing driven.
EASY TO USE
• The pre-rinse tunnel will replace the manual process of pre-rinse spraying before the dishwasher.
• This system is using about 15 Lit/min of temperated water (20-40°C) from the network, sprayed out through an arm.
• For further specifications and accessories, please see overleaf.
• Hood interlocked with safety switch.
• The sensor automatically starts pre-rinsing when the baskets enter the tunnel.
EASY TO CLEAN
• A hygienic design provides for easy cleaning where the front and roof sections are simply lifted off.
• Removable hood for easy cleaning.
EASY TO MAINTAIN
• The pre-rinse tunnel is manufactured from stainless steel AISI 304.
EASY ON THE ENVIRONMENT
• Developed and produced in ISO 9001 and ISO 14001 certified factory.
• CFC free packaging.
Page 2
Electrolux Handling SystemPre-rinse tunnel
Internet: http://www.electrolux.com/foodservice
IIAN0102013-10-02Subject to change without notice
height 527 527
depth 660 660
width 500 500
External dimensions - mm
TECHNICAL DATA
EI - Electrical connection 230 V, 1N, 50/60 230 V, 1N, 50/60
CWI - Cold water inlet 1/2" 1/2"
LEGEND
HSPWTLR
865120
HSPWTRL
865121
865120 865121
Loading...