High Productivity Cooking
Gas Tilting Bratt Pan
100lt
High Productivity Cooking
Gas Tilting Bratt Pan 100lt
595355 (FET100GS)Gas Tilting Braising Pan – 100
Short Form Specification
Item No.
Unit to be Electrolux Gas Tilting Braising Pan 100 liter capacity. Unit shall have
polished chromium nickel molybdenum steel plated cooking surface for roasting,
browning, stewing, preparation of sauces, sautéing, boiling and braising.
Unit shall be floor mounted on two consoles with four adjustable Stainless steel feet.
Unit shall include motorized variable tilting of pan and fully insulated and
counterbalanced closing lid. Cooking temperature and cooking time can be
precisely set through state of the art control panel.
Food sensor temperature built into base plates permits precise temperature
cooking.
liter 230 V
ITEM #
MODEL #
NAME #
SIS #
AIA #
Main Features
•Cooking vessel in 316 Stainless steel (14 gauge / 2
mm).
•Cooking Surface in 18 mm thick plating with 3 mm
Stainless steel 316 for sautéing, poaching, steaming,
boiling, stewing.
•The bottom remains free of distortion and cracks.
•Double –skin structure of panels and lid to reduce heat
dispersion.
•The lid, mounted on the cross beam of the unit, shall
be counterbalanced by a special hinge that remains
open in all positions.
•Lid is double-lined, insulated in 304 AISI Stainless
steel.
•IPX4 controls water resistance certification.
•Actual cooking/holding temperature setting and digital
display.
•Timer with digital display.
•Built in food temperature sensor for precise control of
cooking process.
•An electronic microprocessor control system with
digital pre-selection of food cooking temperature,
cooking time and starting time.
•Robust burner with electronic ignition and monitoring
as standard.
•“Frying” operating mode with temperature over 110 °
C.
•“Cooking” operating mode with temperature equal or
lower than 110 ºC.
•A SOFT setting for a gentle heat input, for delicate
products thus avoiding undesired spillage.
•A HOLD setting where the food is initially cooked then
held at a pre-set temperature.
•Heat-insulated: limited heat radiation and low energy
consumption.
•Motorized and variable tilting. Titling and pouring
speeds can be precisely adjusted.
•Offset tilting axle for convenient pouring height.
•Large directional pouring lip.
•Added safety: external heat-insulated paneling.
•Smooth large surfaces, easy access for cleaning.
•All pan internal surfaces round and polished.
•Pan tilts over 90° for complete emptying/cleaning.
Gas Tilting Bratt Pan 100lt
High Productivity Cooking
APPROVAL:
Optional Accessories
•Water mixer for tilting boiling and bratt
pans (BOT,FET&UET)
•160mm stainless steel plinth, standing
against wall
•160mm stainless steel plinth, freestandingPNC 911462 ❑
•Haccp electronic kit (cop 485.1)PNC 911519 ❑
•C-board welded 1600mmPNC 911749 ❑
Electrolux Professional
www.electrolux.com/foodservice
foodservice@electrolux.com
PNC 581911 ❑
PNC 911432 ❑
High Productivity Cooking
Gas Tilting Bratt Pan
100lt
CWI=Cold Water inlet
EI=Electrical connection
G=Gas connection
Front
Electric
Supply voltage:
595355(FPREOEOOBO)230 V/1N ph/50/60 Hz
Total Watts:0.2 kW
Gas
Gas Power:88634 Btu/hr (26 kW)
Butane;Natural Gas;Propane
Gas Type Option:
Gas Inlet:1" NPT
Natural gas - Pressure:7" w.c. (17.4 mbar)
LPG Gas Pressure:11" w.c. (27.7 mbar)
Top
HWI=Hot water inlet
Side
Key Information
Distance to floor of pouring lip
when tilted:410 mm
Working Temperature MIN:50 °C
Working Temperature MAX:250 °C
Pan useful capacity:100 litres
Width of Pan:1000 mm
Height of Pan:200 mm
Depth of Pan:600 mm
Net weight:270 kg
Shipping weight:444 kg
Shipping height:800 mm
Shipping width:1600 mm
Shipping depth:900 mm
Shipping volume:1.15 m³
No clearance needed on rear sides of unit if wall is of non combustible
type. If wall is combustible, minimum 50 mm wall clearance should be
maintained.
Water fill faucet/ shower to be mounted close to unit for filling and
cleaning (not supplied).
(must be specified when
ordered)
High Productivity Cooking
Gas Tilting Bratt Pan 100lt
The company reserves the right to make modifications to the products
without prior notice. All information correct at time of printing.
201 1.03.07