Electrolux EWP10742, EWP85742, EWP85752 User Manual

EWP10742 EWP85742 EWP85752
EN
MS
ZH
WASHING MACHINE
34
USER MANUAL
66
洗衣机 用户手册
2
................................................... ....................................................................
CONTENTS
WE’RE THINKING OF YOU
CUSTOMER CARE AND SERVICE
2 www.electrolux.com
SAFETY INFORMATION PRODUCT DESCRIPTION CONTROL PANEL BEFORE FIRST USE DAILY USE WASHING HINTS INTERNATIONAL WASH CODE SYMBOLS CARE AND CLEANING TROUBLESHOOTING
.............................................................................................. 3
........................................................................................... 5
...................................................................................................... 6
................................................................................................. 12
................................................................................................................ 12
...................................................................................................... 18
............................................................... 21
............................................................................................. 22
............................................................................................... 27
1 2 3 4 5 6 7 8 9
TECHNICAL DATA .................................................................................................... 3010
INSTALLATION.......................................................................................................... 3111
ENVIRONMENT CONCERNS .................................................................................... 3312
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Welcome to Electrolux.
We recommend the use of original spare parts. When contacting Service, ensure that you have the following data available. The information can be found on the rating plate. Model, PNC, Serial Number.
Visit our website to:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com
Register your product for better service:
www.electrolux.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
Warning / Caution-Safety information. General information and tips. Environmental information.
Subject to change without notice.
ENGLISH 3
SAFETY INFORMATION1.
In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings.
This appliance is intended to be used in household and similar applications such as:
Farm houses By clients in serviced apartments,
holiday apartments and residential type environments.
Conditions of use
To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety.
1.1 GENERAL SAFETY
It is dangerous to alter the specifications or attempt to modify this product in anyway.
During high temperature wash program the door glass may get hot. Do not touch it!
Make sure that small pets do not climb into the drum. To avoid this, please check into the drum before using the appliance.
Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.
Only use the advised quantities of fabric softener and detergent. Damage to the fabric or appliance can occur if you overfill. Refer to the manufacturer’s recommendations of quantities.
Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Do not use your washing machine to wash articles with whalebones, material without hems or torn material.
Always unplug the appliance and turn off the water supply after use, clean and maintenance.
This appliance is heavy. Care should be taken when moving it.
When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre.
All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in the user manual.
Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.
1.2 INSTALLATION
-
-
4
www.electrolux.com
After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable.
If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.
Always be sure, that there is no water leakage from hoses and their connections after the installation.
Any plumbing work required to install this appliance should be carried out by a qualified plumber.
This washing machine is not intended for use by young children or infirm persons without supervision.
Young children should be supervised to ensure that they do not play with the appliance.
The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach.
Make sure that children or pets do not climb into the drum.
Keep all detergents in a safe place out of children’s reach.
Any electrical work required to install this appliance should be carried out by a qualified electrician.
This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed.
Only wash fabrics which are designed to be machine washed. Follow the instructions on each garment label.
Do not overload the appliance. See the relevant section in the user manual.
Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.
Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.
Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself.
Never use the washing machine if the power supply cable, the control panel, the working surface or the base are damaged so that the inside of the washing machine is accessible.
1.3 USE
1.4 CHILD SAFETY
To activate this device, rotate the button (WITHOUT pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin.
When you activate this device, you cannot close the door. This prevents children or pets to be locked in the drum.
To disable this device and restore the possibility of closing the door, rotate the button anti-clockwise until the groove is vertical.
1.5 CHILD SAFETY DEVICE
ENGLISH 5
PRODUCT DESCRIPTION2.
1
Worktop
2
Detergent/Softener Dispenser
3
Control Panel
4
Door Handle
5
Door
13
Door Blocking button
14
Rating Plate
15
Drain Filter
7
6
Level Adjustment Feet (Front)
8
Mains Cable
9
Water Inlet Hose
10
Water Drain Hose
11
Hose Support
12
Back Feet
Transit Bolts
To connect the drain hose on the edge of a sink.
Plastic caps
To close the holes on the rear side of the cabinet after the removal of the transit bolts.
ACCESSORIES
Plastic hose guide
8
9
1
4
5
6
2
3
12
7
11
10
14
15
13
CONTROL PANEL3.
6
www.electrolux.com
Models: EWP10742, EWP85742
1
2
Program Selector Knob
3
4
Spin Selection Touchpad
5
Temperature Touchpad
6
Display
Start/Pause Touchpad
7
Rinse Plus Touchpad
* model EWP85742
8
Prewash Touchpad
9
Child Lock Option
10
Delay Start Touchpad
Quick Wash Touchpad
Model: EWP85752
1
2
Program Selector Knob
3
Spin Selection Touchpad
Temperature Touchpad
Indicators
6
4
5
Start/Pause Touchpad
7
Rinse Plus Touchpad
10
Child Lock Option
8
Prewash Touchpad
9
Delay Start Touchpad
Quick Wash Touchpad
2 6 7 83
1 9510
1 9510
2 64 7 83
4
At the end of program the display will show ‘ ’ (on display models) or Washing End ‘ ’ pilot lights come on (on none-display models) and the ‘ ’ (Door Lock) indicator goes off. The door can be opened.
ENGLISH 7
3.1 Program Selector Knob
Turn this knob to set a program. The washing machine will propose a temperature and automatically select the spin value provided for the program you have chosen.
The selector knob can be turned either clockwise or anticlockwise.
Position “ ” to reset program/ switching OFF the machine.
At the end of the program the selector dial must be turned to position “ ”, to switch the machine off.
3.2 Spin Selection Touchpad
Press this touchpad repeatedly to increase or decrease the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine.
No spin option eliminates all the spin phases and increase the number of rinse.
No Spin
By selecting this option the water of the last rinse is not emptied out and the drum turns regularly to prevent the laundry creases.
Rinse Hold
3.3 Temperature Touchpad
Press this touchpad repeatedly to increase or decrease the wash temperature if you want your laundry to be washed at a temperature different from the one proposed by the washing machine (symbol “ ” corresponds to cold wash).
The door still locked to indicate that the water must be emptied out.
To empty out the water:
Select “Spin” or “Drain” program.
Reduce the spin speed if needed.
Press the touchpad Start/Pause. The appliance will drain the water and then spin.
A
Digital Number; will tell you:
B
-
Washing Phase icon
C
D
Delay Start icon
E
Child Lock icon
Door Lock icon
3.4 Display
(Models : EWP10742, EWP85742)
Washing cycle time.
-
It is on, you cannot open the door.
-
It is off, you can open the door.
-
The alarm codes. Refer to the chapter “Troubleshooting” for their description.
-
Delay start time.
C DA
B E
3.7 Prewash Touchpad
8
www.electrolux.com
Select this option if you wish your laundry to be pre-washed before the main wash. Use this option for heavy soil. The indicator of this option comes on.
When you set this function, put some of detergent into the “ ” compartment.
This function increases the program duration.
3.5 Indicators
(For Model EWP85752)
-
Door lock indicator.
-
Washing end indicator.
-
Child lock indicator.
LED on, you cannot open the door.
LED off, you can open the door.
3.6 Rinse Plus Touchpad
This option is recommended for people who are allergic to detergents, and in areas where the water is very soft.
Press it to add rinsing phases to a program.
The indicator of this option comes on.
3.8 Delay Start Touchpad
This option makes it possible to delay the start of the washing program by 30 min, 60 min or 90 min and then by every hour from 2 to 20 hours.
The delay you have selected is indicated on the display. The end time will increase in order to show you the selected delay.
You must select this option after you have set the program and before you press the Start/Pause touchpad.
If you wish to add laundry in the machine during the delay time press Start/Pause touchpad to put the machine in pause mode. Add laundry, close the door and press Start/Pause touchpad again.
You can cancel the delay time at any moment, by pressing ‘Delay Start’ touchpad repeatedly till the display shows delay time ‘ ’, then press the Start/Pause touchpad.
(For models : EWP10742, EWP85742)
3.9 Delay Start Touchpad
This option makes it possible to delay the start of the washing program by 3, 6 and 9 hours.
Press this touchpad repeatedly to select delay time. The indicator of this option comes on.
You must select this option after you have set the program and before you press the Start/Pause touchpad.
(For Model EWP85752)
ENGLISH 9
3.10 Quick Touchpad
3.11 Start/pause Touchpad
This option can be used for lightly soiled in order to obtain a good washing result in a short time.
The washing time will be reduced according to type of fabric and the selected temperature.
If you wish to add laundry in the machine during the delay time press Start/Pause touchpad to put the machine in pause mode. Add laundry, close the door and press Start/Pause touchpad again.
You can cancel the delay time at any moment, by pressing ‘Delay Start’ touchpad repeatedly till the LED light disappear, then press the Start/Pause touchpad.
To start the selected program, press the ‘Start/Pause’.
To interrupt a program which is running, press the ‘Start/Pause’ to pause the machine.
To restart the program from the point at which it was interrupted, press the ‘Start/Pause’ again.
If you have chosen a delayed start, after pressing ‘Start/Pause’ the machine will begin the countdown.
3.12
Buzzer Sounds
The program is completed.
The appliance has a malfunction.
The buzzer sounds operate when:
If you want to disable the buzzer sound (except for event of
appliance has a malfunction),
press “Rinse +” and “Quick” touchpads at the same time for 6 seconds, and listen for ‘BEEP, BEEP’.
To return to default configuration press these 2 touchpads at the same time for 6 seconds, and listen for ‘BEEPS’.
3.13 Child Lock Option
Your appliance is provided with CHILD SAFETY LOCK which permits you to leave the appliance unsupervised with the door closed without having to worry that children might be injured by or cause damage to the appliance.
Set this option before pressing the Start/Pause and after having selected the required wash program.
This function remains enabled even after the appliance is switched off.
To activate the function, press ‘Prewash’ and ‘Rinse +’ touchpads at the same time until indicator of this option comes on.
Setting Child Lock option:
To deactivate the function, press ‘Prewash’ and ‘Rinse +’ touchpads at the same time until indicator of this option goes off.
10
www.electrolux.com
3.14 Programs + Options
Program; Temperature
Regular; 90 °C to
White and coloured cotton with heavy level of soil; maximum load 7 kg.
Wash Rinses Long spin
Spin Reduction /
Easy Iron; 60 °C to
Synthetic or mixed fabrics, to be ironed underwear, coloured garments, non-shirnk shirts, blouses; maximum load 3.5 kg.
Wash Rinses Short spin
Type of load; Max. weight of load
Cycle description
Options can be combined
Delicates; 40 °C to
Fast’ 20; 30 °C
Delicate fabrics as acrylics, viscose, polyester items with normal soil; maximum load 3.5 kg
Synthetic and mixed fabric items. Light soil and items to freshen up; maximum load 1.5 kg
/ / /
/ /
Spin Reduction /
/ / /
/ /
Spin Reduction /
/ / /
/ /
Spin Reduction /
/ / /
/ /
Spin Reduction /
/ / /
Spin Reduction /
/
Spin Reduction /
/
Spin Reduction /
/ /
-
-
-
-
-
-
Color; 60 °C to
Colours item of mixed fabrics.; maximum load 3.5 kg.
Wash Rinses Short spin
-
-
-
Wash Rinses Short spin
-
-
-
Wash Rinses Short spin
-
-
-
Wash Rinses Short spin
-
-
-
Wool; 40 °C to
Specially tested program for woollen garments bearing the ‘Pure new woollen, non-shrink, machine washable’ label; maximum load 2 kg.
Heavy Duty; 90 to 40 °C
Clothes that are heavily soiled; maximum load 7 kg.
Wash Rinses Short spin
-
-
-
Wash Rinses Short spin
-
-
-
Silk; 30 °C
Delicate laundry such as silk curtains in a short time; maximum load 3 kg.
ENGLISH 11
Program; Temperature
Type of load; Max. weight of load
Cycle description
Options can be combined
Energy Saving 60, 40 °C
White and fast coloured, cotton with normal soil. Set this program to have a good washing results and decrease the energy consumption. The time of the washing program is extended; maximum load 7 kg.
Spin
Drain
To spin the laundry and to drain the water in the drum; maximum load 7 kg.
For emptying out the last rinse water in programs with the ‘Rinse Hold ’ option; maximum load 7 kg.
Rinse
To rinse and spin the laundry; maximum load 7 kg.
For people with sensitive skin or allergies, white and coloured cottons designed for high rinsing efficiency, especially for solid particles; maximum load 5 kg.
This program allows you to soak heavily soiled clothes. There is a water in the drum when the program is completed. To drain the water refer paragraph “To empty out the water” ;
maximum load 7 kg.
Sensitive Plus; 60 °C to
Soak; 30 °C
Wash Rinses Short spin
-
-
-
Wash Rinses Long spin
-
-
-
- Soak
Spin Reduction /
/ / /
Spin Reduction /
/ / /
/ /
Spin Reduction /
/ /
Spin Reduction /
/
1)
1)
Energy Saving program with 60 °C option selected is recommended for a full load of normally soiled cottons, and is the water and energy rating label program.
Drain Spin phase
-
Drain
-
-
Three rinses with softener Spin phase
-
-
12
www.electrolux.com
BEFORE FIRST USE4.
Ensure that the electrical and water connections comply with the installation instructions.
Put 2 litres of water in the detergent compartment for washing phase. This activates the drain system.
1.
2.
3.
Select a Regular cycle at 90 °C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.
DAILY USE5.
Step 1 - Setting A Program For Washing
5.1 Four Steps Start Up Guide
Connect the mains plug to the mains socket.
Turn the water tap on.
* model EWP85742 (for reference only)
1
2
3
4
1.
Turn the program selector dial to the required program.
Once you select a wash program, the program selected will stay at that position for the whole of the wash.
-
The selector dial can be turned either clockwise or anticlockwise.
-
2.
If you want your laundry to be spun or use temperature different from the one proposed by the washing machine, press the Spin ‘ ’ and the temperature ‘ ’ touchpads repeatedly to change the spin speed and temperature.
ENGLISH 13
3.
Press the option touchpads, if you want your laundry to be washed with special functions.
Different functions can be combined which is dependent on the program selected.
When these touchpads are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out.
4.
If you want
to delay the start of the
washing program
, press the ‘Delay Start ’ option touchpad repeatedly to choose your washing machine delay time.
Step 2 - Loading The Laundry
1.
Before loading the laundry, please make sure:
Empty pockets.
Tie the cords.
Fasten buttons.
Close zippers.
Place the laundry in the drum, one item at a time, shaking them out as much as possible.
3.
Open the door by carefully pulling the door handle outwards.
Check and remove objects (if there are any) that could be trapped in the fold.
2.
Underwired bras must NOT be machine washed.
14
www.electrolux.com
Make sure that no laundry remains between the seal and the door.
4.
Close the door.
5.
Powder or liquid detergent.
1
3
Position down : for liquid detergent.
Position up : for powder detergent (factory setting).
Position down : for liquid detergent.
Position up : for powder detergent (factory setting).
2
Step 3 - Using Detergent And Additives
Detergent Dispenser Drawer1.
4
The detergent dispenser is divided into three compartments.
Compartment ‘SOFTENER’
Compartment ‘PREWASH’
This compartment is used for fabric conditioner and starching agent.
This compartment is only used for detergent when a Prewash is selected.
Compartment ‘MAIN WASH’
This compartment is used for detergent on all programs.
Detergent flap
Flap for powder or liquid detergent.
ENGLISH 15
Do not use gelatinous or thick liquid detergents.
-
Do not put more liquid than the maximum level.
-
Do not set the DELAY START.
-
Do not set the PREWASH phase.
-
When you use the liquid detergent:
Measure out the amount of detergent required, pour it into the main wash compartment ( ).
Pull out the dispenser drawer until it stops.
-
-
Measure out the detergent and the fabric softener;
2.
If you wish to carry out the “Prewash” phase, pour it into the compartment marked .
If required, pour fabric softener into the compartment marked (the amount used must not exceed the “MAX” mark in the drawer).
-
-
Close the drawer gently.
-
The appliance will automatically adjust the selected program duration according to the type and size of the load.
-
Step 4 - Starting a program
To start a program, press the Start/Pause ( ) touchpad, the corresponding pilot light will stop flashing and a default program duration will be displayed on the screen (only for display models).
After approx. 15 minutes from the start of a program:
ATTENTION!
If you turn the program selector dial to another program when the machine is working, the red Start/Pause pilot light will flash 3 times and the message ‘ ’ will appear on the display (for display models) to indicate a wrong selection. The machine will not perform the new selected program.
16
www.electrolux.com
To pause press Start/ Pause. The indicator will start flashing.
-
Press the Start/Pause again. The program will continue.
-
5.2 Interruption Of A Program
5.3 Changing A Program
It is possible to change only some option after the program has started.
Press the touchpad Start/Pause. The indicator will start flashing.
1.
Change the options.2.
Press Start/Pause again. The program will continue.
3.
While a program or the delay start is operating, the appliance door is locked and the display shows the indicator ‘ ’.
5.4 Changing The Options
5.5 Opening The Door
First set the machine to PAUSE by pressing the “Start/Pause” touchpad. Wait until the door lock indicator ‘ ’ goes off, then the door can be opened.
If the door lock indicator ‘ ’ does not disappear, this means that the machine is already heating and the water level is above the bottom edge of the door or the drum is turning. In this case the door CAN NOT be opened.
If you can not open the door but you need to open it you have to switch the machine off by turn the program selector knob to the position ‘ ’ to deactivate the appliance. After about 5 minutes the door can be opened.
Pay attention to the water level and water temperature.
CAUTION!
The appliance stops automatically. The acoustic signal will operate. The display will show ‘ ’ (display
models) or Washing End ‘ ’ pilot lights come on (none-display models).
The indicator of the Start/Pause touchpad goes off.
-
-
-
-
-
-
-
-
The door lock indicator ‘ ’ goes off.
Remove the laundry from the appliance. Make sure that the drum is empty.
Keep the door ajar, to prevent the mildew and odours.
Turn off the water tap.
5.6 At The End Of The Program
1.
2.
When The Washing Program Is Completed, But There Is Water In The Drum
The drum turns regularly to prevent the creases in the laundry.
You must drain the water to open the door.
The door lock indicator ‘ ’ is on. The door stays locked.
To drain the water:
If necessary, decrease the spin speed.
Set the “Spin” or “Drain” program.
-
-
5.7
Changing a running program is possible only by resetting it.
Turn the program selector knob to the position ‘ ’ to cancel the program and to turn off the appliance.
1.
Turn the program selector knob to the new program position and set the new option, then press ‘Start/Pause’ touchpad again.
The appliance will not drain the water.
2.
ENGLISH 17
3.
Press the touchpad Start/Pause. The appliance will drain the water.
When the program is completed and the door lock indicator ‘ ’ disappear, you can open the door.
4.
Turn the program selector knob to the position ‘ ’ to deactivate the appliance.
5.
5 minutes after the washing program ends, if you do not deactivate the appliance, the energy saving function activates.
The energy saving function decreases the energy consumption when the appliance is in the stand by mode.
All indicators and the display will switch off.
The indicator of the touchpad Start/Pause will flash slowly.
Press one of the touchpads to deactivate the energy saving status.
Stand by mode
5.8
18
www.electrolux.com
WASHING HINTS6.
Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens.
6.1 Sorting The Laundry
6.2 Temperatures
90°C
60°C 50°C 40°C
30°C Cold
For normally soiled, colourfast garments (e.g. shirts, night dresses,
pyjamas....) in linen, cotton
or synthetic fibres and for lightly soiled white cotton (e.g.underwear).
For delicate items (e.g. net curtains), mixed laundry including synthetic fibres and woollens bearing the label pure new wool, machine washable, non-shrink.
For normally soiled white cottons and linen (e.g. teacloths, towels, tablecloths, sheets...).
Never wash whites and coloureds together. Whites may lose their “whiteness” in the wash.
New coloured items may run in the first wash; they should therefore be washed separately the first time.
Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or long tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special detergent or detergent paste. Treat curtains with special care. Remove hooks or tie them up in a bag or a net.
Make sure that no metal objects are left in the laundry (e.g. hair clips, safety pins, pins).
6.3 Before Loading The Laundry
Recommended loads are indicated in the program charts. General rules:
Washing a maximum load makes the most efficient use of water and energy. For heavily soiled laundry, reduce the load size.
Cotton, linen:
drum full but not too tightly packed;
Synthetics:
drum no more than half full;
Delicate fabrics and woollens:
drum no more than one third full.
6.4 Maximum Loads
Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water.
Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times.
Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips and a cotton cloth.
Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing.
6.5 Removing Stains
ENGLISH 19
Rust: oxalic acid dissolved in hot
water or a rust removing product used in cold water. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well (whites and fast coloureds only).
Grass: soap lightly and treat with bleach (whites and fast coloureds only).
Ball point pen and glue: moisten with acetone (*), lay the garment on a soft cloth and dab the stain.
Lipstick: moisten with acetone (*) as above, then treat stains with methylated spirits. Remove any residual marks from white fabrics with bleach.
The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before starting the wash program.
Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Treat any residual marks with bleach.
Ink: depending on the type of ink, moisten the fabric first with acetone (*), then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly.
Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with detergent paste.
Good washing results also depend on the choice of detergent and use of the correct quantities to avoid waste and protect the environment.
Although biodegradable, detergents contain substances which, in large quantities, can upset the delicate balance of nature.
The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, etc.), the colour, washing temperature and degree of soiling.
Only low suds Front load washer detergents should be used in this appliance:
(*) do not use acetone on artificial silk.
6.6 Detergents and Additives
powder detergents for all types of fabric,
powder detergents for delicate fabrics (60 °C max) and woollens,
liquid detergents, preferably for low temperature wash program (60 °C max) for all types of fabric, or special for woollens only.
If using concentrated powder or liquid detergents, a program without PREWASH must be selected.
Pour liquid detergent into the dispenser drawer compartment marked ‘ ’ just before starting the program.
20
www.electrolux.com
the washload to turn grey, greasy clothes.
sudsing,
inadequate rinsing.
reduced washing effect,
Any fabric softener or starching additives must be poured into the compartment marked ‘ ’ before starting the wash program.
Follow the product manufacturer’s recommendations on quantities to use and do not exceed the MAX mark in the detergent dispenser drawer.
The type and quantity of detergent will depend on the type of fabric, load size, degree of soiling and hardness of the water used.
Do not spray stain pre-treatment products (e.g. Preen) on or near the machine, as it can attack plastic materials reducing its life.
Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority.
Follow the product manufacturers’ instructions on quantities to use.
Water hardness is classified in so-called “degrees” of hardness.
6.7 Quantity Of Detergent To Be Used
Not enough washing powder causes:
Too much washing powder causes:
you are washing a small load,
large amounts of foam form during washing.
the laundry is lightly soiled,
Use less detergent if:
ENGLISH 21
INTERNATIONAL WASH CODE SYMBOLS7.
These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.
Bleach in cold water DO NOT bleach
Bleaching
Energetic wash
Delicate wash
Hand wash
Max. wash
temperature
95 °C
Hot iron
max. 200 °C
Dry cleaning in
all solvents
Dry cleaning in
perchlorethylene,
petrol, pure alcohol,
R 111 & R 113
Dry cleaning in
petrol, pure alcohol
and R 113
DO NOT
dry clean
Warm iron
max. 150 °C
Lukewarm iron
max. 110 °C
DO NOT iron
Max. wash
temperature
60 °C
Max. wash
temperature
40 °C
Max. wash
temperature
30 °C
DO NOT
wash at all
Ironing
Dry cleaning
Drying Flat Tumble dry DO NOT
tumble dry
High temperature
Low temperature
On clothes
hanger
On the line
22
www.electrolux.com
CARE AND CLEANING8.
You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work.
The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine.
Clean the appliance only with soap and warm water. Fully dry all the surfaces.
Do not use alcohol, solvents or chemical products.
Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions.
This will help to prevent the formation of lime deposits.
8.2 Descaling
8.1 External Cleaning
The washing powder and additive dispenser drawer should be cleaned regularly.
Remove the drawer by pressing the catch downwards and by pulling it out. Flush it out under a tap, to remove any traces of accumulated powder.
8.5 Cleaning The Dispenser Drawer
Leave the door open for a while. This helps to prevent mould and stagnant smells forming inside the appliance. Keeping the door open after a wash will also help to preserve the door seal.
8.3 After Each Wash
With the use of low temperature washes it is possible to get a build up of residues inside the drum.
We recommend that a maintenance wash be performed on a regular basis.
8.4 Maintenance Wash
The drum should be empty of laundry.
Select the hottest “Regular” wash program.
Use a normal measure of detergent, must be a powder with biological properties.
To run a maintenance wash:
WARNING!
CAUTION!
1
2
ENGLISH 23
8.7 Cleaning the drain filter
Turn program selector dial to position Off ( ).
Unplug the appliance. Open the door.
To clean the drain filter:
Disconnect the mains plug from the mains socket.
Do not clean the drain filter if the water in the appliance is hot.
1. Turn the drum and align the filter cover (FILTER) with the arrow on the door seal.
WARNING!
WARNING!
Drain filter collects lint and other items left in the dirty laundry to prevent pump blockage
The pump must be cleaned regularly. To clean the filter, proceed as follows:
To aid cleaning, the top part of the additive compartment should be removed.
Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse program without any clothes in the drum.
8.6 Cleaning The Drawer Recess
24
www.electrolux.com
2. Open the filter cover by pressing the special hook and by rotating the cover upwards.
Hold filter securly and pull upwards to remove it from its position.
Clean the filter under the water tap.
After cleaning the filter, open the filter cover and insert the filter back to its position.
4.
5.
6.
Remove eliminate the eventual fluff or small objects (if there is any) around the filter.
3.
ENGLISH 25
IMPORTANT!
Close the filter cover.
Insert the mains plug again.
The filter is inserted correctly when the indicator on this top is visible and you will hear “Click” sound.
7.
8.
9.
Do not start washing clothes without the filter in its place.
WARNING!
If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.
It is therefore a good idea to clean it from time to time.
Remove the water inlet hose from the water tap.
Remove the inlet hose behind the appliance.
Clean the filter in the valve with a stiff brush or a towel.
Install again the inlet hose. Make sure that the couplings are tight to prevent leakages.
Clean the filter in the inlet hose with a stiff brush.
8.8 Cleaning The Water Inlet Filter
To clean the water inlet filters:
1.
Close the water tap.
2.
3.
4.
5.
6.
7. Open the water tap.
45°
26
www.electrolux.com
If the machine is exposed to temperatures below 0°C, certain precautions should be taken.
8.9 The Dangers Of Freezing
Turn off the water tap.1.
2. Unscrew the inlet hose.
3. Remove the drain hose from the rear support and unhook it from sink or spigot.
4. Put the ends of the drain and inlet hose in a container. Let the water flow out of the hoses.
5. When no more water flows, install the inlet hose and the drain hose again.
Disconnect the mains plug from the mains socket.
Do this procedure also when you want to do the emergency drain.
Make sure that the temperature is more than 0 °C before you use the appliance again.
The manufacturer is not responsible for damages caused by low temperatures.
ENGLISH 27
The door has not been closed.
Display model: Error code: . None-Display model: Door lock ‘ ’ LED
and ‘Start/Pause’ LED flashing.
The plug is not properly inserted in the power socket.
There is no power at the socket.
Insert the plug into the power socket.
Please check your domestic electrical installation.
The Start/Pause button has not been pressed.
Press the Start/Pause button.
The delay start has been selected.
If the laundry are to be washed immediately, cancel the delay start.
The inlet hose is squashed or kinked.
Display model: Error code: . None-Display model: Child lock ‘ ’ LED
and ‘Start/Pause’ LED flashing.
Check the inlet hose connection.
The end of the drain hose is too low.
Display model: Error code: . None-Display model: Child lock ‘ ’ LED
and ‘Start/Pause’ LED flashing.
Refer to relevant paragraph in “water drainage” section.
The drain hose is squashed or kinked.
Display model: Error code: . None-Display model: Washing End ‘ ’ LED
and ‘Start/Pause’ LED flashing.
Check the drain hose connection.
The filter in the inlet hose is blocked.
Display model: Error code: . None-Display model: Child lock ‘ ’ LED
and ‘Start/Pause’ LED flashing.
Clean the water inlet hose filter.
The door is not properly closed.
Display
model: Error code: . None-Display model: Door lock ‘ ’ LED
and ‘Start/Pause’ LED flashing.
Close the door firmly.
The water tap is closed.
Display model: Error code: . None-Display model: Child lock ‘ ’ LED
and ‘Start/Pause’ LED flashing.
Open the water tap.
Close the door firmly.
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below.
During machine operation it is possible that the RED Start/Pause pilot light flashes to indicate that the machine is not working.
Once the problem has been eliminated, press the Start/Pause button to restart the program. If after all checks, the problem persists, contact your local Service Centre.
The washing machine does not start:
The machine does not fill the water:
The machine fills then empties immediately:
TROUBLESHOOTING9.
Malfunction Possible cause Solution
The machine does not empty and/or does not spin:
28
www.electrolux.com
Malfunction Possible cause Solution
Too much detergent or unsuitable detergent (creates too much foam) has been used.
Reduce the detergent quantity or use another one.
Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp.
Check the water inlet hose connection.
Too little detergent or unsuitable detergent has been used.
Increase the detergent quantity or use another one.
The program is still running.
Wait until the end of washing cycle.
The transit bolts and packing have not been removed.
Check the correct installation of the appliance.
The support feet have not been adjusted.
Check the correct levelling of the appliance.
The laundry is not evenly distributed in the drum.
Pause the machine and redistribute laundry manually.
There is very little laundry in the drum.
Load more laundry.
Unstable floors eg. wooden floors. Refer to relevant paragraph
in “Positioning” section.
The door lock has not been released.
Wait about 5 minutes.
There is water in the drum. Select “Spin” or “Drain” program
to empty out the water.
Stubborn stains have not been treated prior to washing.
Use commercial products to treat the stubborn stains.
The correct temperature was not selected.
Check if you have selected the correct temperature.
Excessive laundry load. Reduce load.
The drain hose is damaged. Change it with a new one.
There is water on the floor:
Unsatisfactory washing results:
The door will not open:
The machine vibrates or is noisy:
The machine does not empty and/or does not spin:
The drain filter is clogged.
Display model: Error code: . None-Display model: Washing End ‘ ’
LED and ‘Start/Pause’ LED flashing.
Clean the drain filter.
The option ‘Rinse Hold ’ or ‘No Spin ’ has been selected.
Disable the option ‘Rinse Hold ’ or ‘No Spin ’.
Slelect spin program.
Pause the machine and redistribute laundry manually.
The laundry is not evenly distributed in the drum.
ENGLISH 29
If you are unable to identify or solve the problem, contact our service centre.
Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.
Malfunction Possible cause Solution
The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum.
The laundry is redistributed by reverse rotation of the drum.
This may happen several times before the unbalance disappears and normal spinning can resume. If, after 10 minutes, the laundry is still not evenly distributed in the drum, the machine will not spin. In this case, redistribute the load manually and select the spin program.
Machine not installed properly. Make sure the levelling of
the appliance is correct. Refer to ‘Installation’.
Transit bolts or packaging not removed.
The load may be too small.
Make sure that the packaging and/or the transit bolts are removed. Refer to ‘Installation’.
Machines based on modern technology operate very economically using very little water without affecting performance.
Add more laundry in the drum.
Pause the machine and redistribute laundry manually.
The machine makes an unusual noise:
No water is visible in the drum:
Cycle time longer than displayed:
Spinning starts late or the machine does not spin:
Reduce the detergent quantity or use another one.
Redistribute laundry manually in the drum and start the spin phase again. Refer to relevant paragraph in “Positioning” section.
Detergent over dose.
Machine unbalance.
30
www.electrolux.com
TECHNICAL DATA10.
Dimensions
Power supply (voltage/frequency)
Total power absorbed
Minimum fuse protection
Water supply pressure
Maximum load
Spin speed
220-240 V/50 Hz (60 Hz for PHILIPPINES)
2200 W (2000 W for PHILIPPINES)
10 A
0.8 MPa
0.05 MPa
Maximum
Minimum
Width
Height
Depth
59.6 cm
84.7 cm
55.3 cm
Silk
Sensitive Plus
Easy Iron, Color, Delicates
7.0 Kg
5.0 Kg
Regular, Heavy Duty, Energy Saving, Rinse, Spin, Drain
Programs Max. LoadModel
EWP10742, EWP85742, EWP85752
EWP10742, EWP85742, EWP85752
EWP10742, EWP85742, EWP85752
EWP10742, EWP85742, EWP85752
EWP10742, EWP85742, EWP85752
EWP10742, EWP85742, EWP85752
3.0 Kg
Wool 2.0 Kg
Fast’20 1.5 Kg
3.5 Kg
1000 rpm
850 rpm
Regular, Easy Iron, Color, Delicates, Wool, Heavy Duty, Sensitive Plus, Energy Saving, Rinse, Spin
Programs Max. SpinModel
Silk, Fast’20
EWP10742
800 rpm
EWP10742
EWP85742, EWP85752
650 rpm
EWP85742, EWP85752
Loading...
+ 70 hidden pages