Electrolux EW7W5468E6 User guide

EW7W5468E6

EN Washer Dryer User Manual

www.electrolux.com2

CONTENTS

1. SAFETY INFORMATION....................................................................................3

2. SAFETY INSTRUCTIONS..................................................................................6

3. PRODUCT DESCRIPTION................................................................................ 8

4. TECHNICAL DATA.............................................................................................8

5. INSTALLATION.................................................................................................. 9

6. ACCESSORIES................................................................................................12

7. CONTROL PANEL........................................................................................... 12

8. DIAL AND BUTTONS....................................................................................... 15

9. PROGRAMMES............................................................................................... 18

10. SETTINGS......................................................................................................26

11. BEFORE FIRST USE..................................................................................... 27

12. DAILY USE - WASHING ONLY......................................................................27

13. DAILY USE - WASHING & DRYING.............................................................. 31

14. DAILY USE - DRYING ONLY......................................................................... 33

15. FLUFF IN THE FABRICS............................................................................... 34

16. HINTS AND TIPS........................................................................................... 34

17. CARE AND CLEANING..................................................................................37

18. TROUBLESHOOTING....................................................................................42

19. CONSUMPTION VALUES..............................................................................46

20. ENVIRONMENTAL CONCERNS................................................................... 48

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious and
stylish, it has been designed with you in mind. So whenever you use it, you can
be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.

Visit our website to:

Get usage advice, brochures, trouble shooter, service and repair information:

www.electrolux.com/support

Register your product for better service:

www.registerelectrolux.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.

Warning / Caution-Safety information
General information and tips
Environmental information

Subject to change without notice.

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible for any injuries or damage that are the result
of incorrect installation or usage. Always keep the
instructions in a safe and accessible location for future
reference.

1.1 Children and vulnerable people safety

WARNING!

Risk of suffocation, injury or permanent
disability.

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.

• Children between 3 and 8 years of age and persons

with very extensive and complex disabilities shall be
kept away from the appliance unless continuously
supervised.

• Children of less than 3 years of age should be kept

away from the appliance unless continuously
supervised.

• Children should be supervised to ensure that they do

not play with the appliance.

• Keep all packaging away from children and dispose of

it appropriately.

• Keep detergents away from children.

• Keep children and pets away from the appliance when

the door is open.

• If the appliance has a child safety device, it should be

activated.

ENGLISH 3

www.electrolux.com4

• Children shall not carry out cleaning and user

maintenance of the appliance without supervision.

1.2 General Safety

• Do not change the specification of this appliance.

• This appliance is intended to be used in household

and similar applications such as:

– staff kitchen areas in shops, offices and other

working environments;

– by clients in hotels, motels, bed & breakfast and

other residential type environments;

– areas for communal use in blocks of flats or in

launderettes.

• The appliance shall be installed as a freestanding

product or below the kitchen worktop if space margins

permit.

• Do not install the appliance behind a lockable door, a

sliding door or a door with a hinge on the opposite

side, that would prevent the appliance door from being

fully open.

• Connect the mains plug to the mains socket only at

the end of the installation process. Make sure that the

mains plug is accessible after installation.

• The ventilation opening in the base must not be

covered by a carpet, mat, or any floor covering.

• WARNING: The appliance must not be supplied

through an external switching device, such as a timer,

or connected to a circuit that is regularly switched on

and off by a utility.

• Ensure good air ventilation in the room where the

appliance is installed to avoid the backflow of

unwanted gases into the room from appliances

burning gas or other fuels, including open fires.

• Exhaust air must not be discharged into a flue which is

used for exhausting fumes from any appliances

burning gas or other fuels.

ENGLISH 5

• The operating water pressure at the water entry point

from the outlet connection must be between 0.5 bar
(0.05 MPa) and 8 bar (0.8 MPa).

• The appliance maximum load is 8 kg. Do not exceed

the maximum load of each programme (refer to the
"Programmes" chapter).

• The appliance must be connected to the water mains

using the new supplied hose sets, or other new hose
sets supplied by the Authorised Service Centre.

• Old hose sets must not be reused.

• If the mains power supply cable is damaged, it must

be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.

• Wipe away lint or packaging debris that has

accumulated around the appliance.

• Items that have been soiled with substances such as

vegetable or mineral oil, acetone, alcohol, petrol,
kerosene, spot removers, turpentine, waxes and wax
removers should be washed separately with an extra
amount of detergent before being dried in the washer
dryer.

• Do not use the appliance if items have been soiled

with industrial chemicals.

• Do not dry unwashed items in the wash dryer.

• Items such as foam rubber (latex foam), shower caps,

waterproof textiles, and rubber backed articles and
clothes, or pillows fitted with foam rubber pads should
not be dried in the washer dryer.

• Fabric softeners, or similar products, should only be

used as specified by the product manufacturer’s
instructions.

• Remove all objects from items that could be a source

of fire ignition such as lighters or matches.

• Never stop the washer dryer before the end of the

drying cycle unless all items are quickly removed and
separated so that residual heat can dissipate.

www.electrolux.com6

• The final part of the washer dryer cycle takes place

without heat (cool down cycle) to ensure that items

reach a temperature that will not cause damage to

them.

• Do not use high pressure water sprays and/or steam

to clean the appliance.

• Clean the appliance with a moist cloth. Use only

neutral detergents. Do not use abrasive products,

abrasive cleaning pads, solvents or metal objects.

• Before any maintenance operation, deactivate the

appliance and disconnect the mains plug from the

socket.

2. SAFETY INSTRUCTIONS

2.1 Installation

The installation must comply
with relevant national
regulations.

• Follow the installation instructions
supplied with the appliance.

• Do not install or use the appliance
where the temperature can be less
than 0°C or where it is exposed to the
weather.

• Always keep the appliance vertical
when it is being moved.

• Make sure that there is air circulation
between the appliance and the floor.

• Remove all the packaging and the
transit bolts.

• The floor area on which the appliance
is to be installed must be flat, stable,
heat resistant and clean.

• Keep the transit bolts in a safe place.
If the appliance is to be moved in the
future they must be reattached to lock
the drum to prevent an internal
damage.

• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.

• Do not install or use a damaged
appliance.

• Do not install the appliance where the
appliance door cannot be fully
opened.

• Adjust the feet to have the necessary
space between the appliance and the
flooring.

• When the appliance is in its
permanent position, check if it is
levelled correctly with the aid of a
spirit level. If it is not, adjust the feet
accordingly.

2.2 Electrical Connection

WARNING!

Risk of fire and electric
shock.

• WARNING: This appliance is
designed to be installed / connected
to a grounding connection in the
building.

• Always use a correctly installed
shockproof socket.

• Do not use multi-plug adapters and
extension cables.

• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.

• Do not touch the mains cable or the
mains plug with wet hands.

2.3 Water Connection

• The inlet water shall not exceed
25 °C.

• Do not cause damage to the water
hoses.

ENGLISH 7

• Before connection to new pipes, pipes
not used for a long time, where repair
work has been carried out or new
devices fitted (water meters, etc.), let
the water flow until it is clean and
clear.

• Ensure that there are no visible water
leaks during and after the first use of
the appliance.

• Do not use an extension hose if the
inlet hose is too short. Contact the
Authorised Service Centre for the
replacement of the inlet hose.

• When unpacking the appliance, It is
possible to see water flowing from the
drain hose. This is due to the testing
of the appliance with the use of water
in the factory.

• You can extend the drain hose to
maximum 400 cm. Contact the
Authorised Service Centre for the
other drain hose and the extension.

• Make sure that there is access to the
tap after the installation.

2.4 Use

WARNING!

Risk of injury, electric shock,
fire, burns or damage to the
appliance.

• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.

• Do not touch the glass door while a
programme operates. The glass can
get hot.

• Do not dry damaged (torn, frayed)
items that contain padding or fillings.

• If laundry has been washed with a
stain remover, carry out an additional
rinse cycle before starting a drying
cycle.

• Make sure that all metal objects are
removed from the laundry.

• Dry only fabrics that are suitable to
dry in the appliance. Follow the
cleaning instruction on the item label.

• Do not sit or stand on the open door
of the appliance.

• Do not dry dripping wet clothes in the
appliance.

• Do not let hot items to touch the
plastic parts of the appliance.

• Remove a detergent ball (if used)
before starting a drying programme.

• Do not use a detergent ball if setting a
non-stop programme.

2.5 Service

• To repair the appliance contact the
Authorised Service Centre. Use
original spare parts only.

• Please note that self-repair or non­professional repair can have safety
consequences and might void the
guarantee.

• The following spare parts will be
available for 10 years after the model
has been discontinued: motor and
motor brushes, transmission between
motor and drum, pumps, shock
absorbers and springs, washing drum,
drum spider and related ball bearings,
heaters and heating elements,
including heat pumps, piping and
related equipment including hoses,
valves, filters and aquastops, printed
circuit boards, electronic displays,
pressure switches, thermostats and
sensors, software and firmware
including reset software, door, door
hinge and seals, other seals, door
locking assembly, plastic peripherals
such as detergent dispensers. Please
note that some of these spare parts
are only available to professional
repairers, and that not all spare parts
are relevant for all models.

• Concerning the lamp(s) inside this
product and spare part lamps sold
separately: These lamps are intended
to withstand extreme physical
conditions in household appliances,
such as temperature, vibration,
humidity, or are intended to signal
information about the operational
status of the appliance. They are not
intended to be used in other
applications and are not suitable for
household room illumination.

2.6 Disposal

• Disconnect the appliance from the
mains electrical and water supplies.

• Cut off the mains electrical cable
close to the appliance and dispose of
it.

1 2 3

9

5

7

4

10

8

11 12

6

00000000

00A

Mod.

xxxxxxxxx

000V ~ 00Hz 0000 W

910000000

00

A
B
C

Prod.No.

D

www.electrolux.com8

• Remove the door catch to prevent
children or pets from becoming
trapped in the drum.

• Dispose of the appliance in
accordance with local requirements

3. PRODUCT DESCRIPTION

3.1 Appliance overview

for the disposal of Waste Electrical
and Electronic Equipment (WEEE).

Worktop

1

Detergent dispenser

2

Control panel

3

Door handle

4

Rating plate

5

Drain pump filter

6

Feet for levelling the appliance

7

4. TECHNICAL DATA

Dimension Width/ Height/ Total

Drain hose

8

Inlet hose connection

9

Mains cable

10

Transit bolts

11

Hose support

12

The rating plate reports the model name (A) ,
product number (B), electrical ratings (C) and
serial number (D).

depth

59.7 cm /84.7 cm /57.3 cm

1

2

ENGLISH 9

Electrical connection Voltage

Level of protection against ingress of solid parti‐
cles and moisture ensured by the protective cov‐
er, except where the low voltage equipment has
no protection against moisture

Water supply

Water supply pressure Minimum

Maximum wash load Cotton 8 kg

Maximum dry load Cotton

Spin Speed Maximum spin speed 1600 rpm

1)

Connect the water inlet hose to a water tap with a 3/4'' thread.

1)

5. INSTALLATION

WARNING!

Refer to Safety chapters.

5.1 Unpacking

1. Open the door. Remove all the items

from the drum.

Overall power
Fuse
Frequency

Maximum

Synthetics

230 V
2200 W
10 A
50 Hz

IPX4

Cold water

0.5 bar (0.05 MPa)
8 bar (0.8 MPa)

5 kg
3 kg

Accessories delivered
with the appliance may
vary depending on the
model.

2. Put the packaging element on the
floor behind the appliance and
carefully put it down onto its rear
side. Remove the polystyrene
protection from the bottom.

CAUTION!

Do not lay washing
machine on its front.

3. Put the appliance back into an
upright position. Remove the power
supply cable and the drain hose from
the hose holders.

20º20º

45º45º

www.electrolux.com10

It is possible to see
water flowing from the
drain hose. This is
because the washing
machine has been
tested at the factory.

4. Remove the three transit bolts and
pull out the plastic spacers.

We recommend that
you keep the
packaging and the
transit bolts for any
transport of the
appliance.

5. Put the plastic caps, that you find in

the user manual bag, in the holes.

WARNING!

Do not put cardboard, wood
or equivalent materials
below the appliance feet to
adjust the level.

The inlet hose

CAUTION!

Make sure there is no
damage to hoses and there
are no leaks from the
couplings. Do not use an
extension hose if the inlet
hose is too short. Contact
the service centre for a
replacement inlet hose.

1. Connect the water inlet hose to the
back of the appliance.

5.2 Information for installation

Positioning and levelling

Adjust the appliance correctly to prevent
vibration, noise and movement of the
appliance when it operates.

1. Install the appliance on a flat hard

floor. The appliance must be levelled and
stable. Make sure that the appliance
does not touch the wall or other units and
there is air circulation below the
appliance.

2. Loosen or tighten the feet to adjust the

level. All feet must rest firmly on the floor.

2. Position it toward left or right
depending on the positon of the water
tap. Make sure that the inlet hose is not
in vertical position.

3. If necessary, loosen the ring nut to set
it in the correct position.

4. Connect the water inlet hose to the
cold water tap with 3/4'' thread.

WARNING!

The inlet water shall not
exceed 25 °C.

Water drainage

The drain hose should stay at a height of
no less than 60 cm and not more than
100 cm.

You can extend the drain
hose to maximum 400 cm.
Contact the authorised
service centre for the other
drain hose and the
extension.

It is possible to connect the drain hose in
different ways:

1. Make a U shape with the drain hose
and put it around the plastic hose guide.

2. On the edge of a sink - Fasten the
guide to the water tap or to the wall.

ENGLISH 11

4. To a stand pipe with vent hole - Insert
the drain hose directly into a drain pipe.
Refer to the illustration.

The end of the drain hose
must always be ventilated ,
i.e. the inner diameter of the
drain pipe (min. 38 mm ­min. 1.5") must be larger
than the external diameter of
the drain hose.

Make sure that the plastic
guide cannot move when the
appliance drains and the
drain hose end is not
immersed in the water.
There may be a return of
dirty water into the
appliance.

3. If the end of the drain hose looks like
this (see the picture), you can push it
directly into the stand pipe.

5. Without the plastic hose guide, to a
sink spigot- Put the drain hose in the
spigot and tighten it with a clamp. Refer
to the illustration.

Make sure that the drain hose makes a
loop to prevent particles going into the
appliance from the sink.

ø16

1

W011

2

www.electrolux.com12

Connect the drain hose to the spigot and
tighten it with a clamp. Make sure that
the drain hose makes a loop to prevent
particles going into the appliance from
the sink.

6. Position the hose directly to a built-in

drain pipe in the room wall and tighten it
with a clamp.

5.3 Electrical connection

At the end of installation you can connect
the mains plug to the mains socket.

The rating plate and the 'Technical Data'
chapter indicate the necessary electrical
ratings. Make sure that they are
compatible with the mains power supply.

Check that your domestic electrical
installation can take the maximum load
required, also taking into account any
other appliances in use.

Connect the appliance to an earthed
socket.

The power supply cable must be easily
accessible after installing the appliance.

For any electrical work required to install
this appliance, contact our Authorised
Service Centre.

The manufacturer does not accept any
responsibility for damage or injury
through failure to comply with the above
safety precaution.

6. ACCESSORIES

6.1 Available in www.electrolux.com/shop or from authorised

dealer

Only appropriate accessories approved by ELECTROLUX ensure the
safety standards of the appliance. If unapproved parts are used, any
claims will be invalidated.

6.2 Fixing plate kit

If you install the appliance on a plinth
that is not an accessory supplied by
ELECTROLUX, secure the appliance in
the fixing plates.

7. CONTROL PANEL

7.1 Special features

Your new washer-dryer meets all modern
requirements for effective treatment of

Read carefully the instructions supplied
with the accessory.

laundry with low water, energy and
detergent consumption and detergent
consumption and proper care of fabric.

Rinse

Eco 40-60

Cotton

Synthetics

Delicate

Wool

FreshS

c

ent

Spin/Drain

M

ac

hin

e Clean

Denim

MixCare

Anti­Allergy

Ou

tdoor

Quick 20’ Wash&Dry 60’

Mode

Tem

p.

W

as

h

90°

60°

40°

30°

20°

Cold

Dry

Spin

T

im

e

Manager

Prewash

Delay

St

art

Time

D

ry

Auto

Dry

2

3 4 5

12 11 8

1

7 6

910

ENGLISH 13

• FreshScent System, thanks to new
FreshScent steam programme, offers

the perfect solution for refreshing
even the most delicate garments
without washing. Use the delicate
fragrance exclusively developed by
ELECTROLUX to add a pleasant
feeling of "just-washed" garment to
the removing odours and wrinkles
action.

7.2 Control panel description

The permanent options are
set by holding pressed the
relative button for at least 3
seconds.

Programme dial

1

Display

2

Auto Dry touch button

3

Time Dry touch button

4
5

Start/Pause touch button
Delay Start touch button

6

Time Manager touch button and

7

permanent Child Lock option

• The SensiCare System detects the
laundry load size defining the
programme duration in 30 seconds.
The washing programme is tailored to
the laundry load and the type of fabric
without consuming more time, energy
and water than necessary.

Prewash touch button and

8

permanent Extra Rinse option
Spin touch button

9

Temp. touch button

10

Mode touch button:

11

• Wash

• Dry

12

On/Off push button

www.electrolux.com14

7.3 Display

Door locked indicator.

The digital indicator can show:

• Programme duration (e. g. , washing and/or drying
phase).

• Delay time (e. g. ).

• Cycle end ( ).

• Warning code (e.g.

• Error indicator ( ).

Time Manager indicator.

).

Extra Rinse indicator.

The spin area:
Spin speed indicator

No Spin indicator. Spin phase is off.

Rinse Hold indicator.

After the SensiCare System detection, it flashes when the
laundry load exceeds the maximum declared load of the selec‐
ted programme. Refer to "The SensiCare System load detec‐
tion " paragraph.

Auto Dry indicator:

Iron dry

Cupboard dry

Extra dry

Child safety lock indicator.

Time Dry and Non-Stop programme indicator.

7.4 Multilingual badges

Outdoor

Puuvilla

Puuvilla

Koneen puhdistus

Silkki

Villa

Tyhjennys/Linkous

Huuhtelu

Pika 14 min.

Hienopesu

Synteettiset

Denim

UltraWash

Anti-Allergy

Adhesive badges in different languages
are supplied with the appliance.

The desired badge can be glued next to
the programme dial.

8. DIAL AND BUTTONS

ENGLISH 15

8.1 Introduction

The options/functions are
not available with all
washing programmes.
Check the compatibility
between options/functions
and washing programmes in
the "Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set incompatible options/
functions.

8.2 On/Off

Press this button for a few seconds to
activate or deactivate the appliance. Two
different tunes sound while switching the
appliance on or off.

As the Stand-by function automatically
deactivates the appliance after several
minutes to reduce the energy
consumption, you may need to activate
the appliance again.

For more details, refer to Stand-by
paragraph in Daily Use chapter.

8.3 Mode

Thanks to this button, a cycle can
perform:

• Only washing: Wash indicator is on
(default mode).

• Washing and drying: Wash and Dry
indicators are on.

• Only drying: Dry indicator is on.

8.4 Temp.

When you select a washing programme,
the appliance automatically proposes a
default temperature.

Tap on this button to change the water
temperature.

The indicator of the set temperature
comes on.

The indicator Cold corresponds to cold
water.

8.5 Spin

When you set a programme, the
appliance automatically sets the
maximum spin speed allowed, except for
programme Denim. With this option you
can decrease the default spin speed.

Touch repeatedly this button to:

• Decrease the spin speed. The
display shows only the spin speeds
available for the set programme.

• Additional spin options No Spin

.
Set this option to deactivate all spin
phases. The appliance performs the
only draining phase of the selected
washing programme. Set this option
for very delicate fabrics. The rinses
phase uses more water for some
washing programmes

• Activate the Rinse Hold
The final spin is not performed. The
water of the last rinse is not drained
out to prevent the fabrics from
creasing. The washing programme
ends with water in the drum.

option.

www.electrolux.com16

The indicator is on display. The
door stays locked and the drum turns
regularly to reduce creasing. You
must drain the water to unlock the
door.

If you touch the Start/Pause
button, the appliance performs the
spinning phase and drains the water.

The appliance empties
the water out
automatically after 18
hours approximately.

8.6 Prewash

With this option you can add a prewash
phase to a washing programme.

The corresponding indicator above the
touch button illuminates.

• Use this option to add a pre-wash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust, mud and other
solid particles.

The options can increase the
programme duration.

When you set a washing programme, the
display shows the default duration and

dashes.

Touch Time Manager button to reduce
the programme duration according to
your needs. The display shows the new
programme duration and a number of
dashes will decrease accordingly:

suitable for a full load of normally

soiled garments.

a quick cycle for a full load of lightly

soiled garments.

very quick cycle for a smaller lightly
soiled load (max. half load
recommended).

the shortest cycle to freshen up a
small amount of laundry.

The Time Manager is available only with
the programmes in the table.

indicator

Eco 40-60

Cotton

Synthetics

8.7 Permanent Extra Rinse

With this option you can permanently
have an extra rinse when you set a new
programme.

To activate/deactivate this option, hold
the Prewash button pressed for 3

seconds until the indicator comes on/
goes off on the display.

When it is activated, the appliance will
default to this option after you switch it
off or change/reset the programme.

This option increases the
programme duration.

8.8 Time Manager

With this option you can reduce the
programme duration depending on the
load size and the degree of soiling.

1)

1)

Default duration for all programmes.

Time Manager with steam

programmes

When setting a steam programme, this
button allows to chose three steam levels
and the programme duration is reduced
accordingly:

• : maximum.

• : medium.

• : minimum.

■

■ ■ ■

■

■ ■ ■

■ ■ ■

■ ■

■ ■

ENGLISH 17

8.9 Child Lock

With this option you can prevent children
from playing with the control panel.

To activate/deactivate this option, hold
the Time Manager button pressed until

the indicator
the display.

When it is activated, the appliance will
default to this option after you switch it
off or change/reset the programme. If

you press any button, the indicator
blinks to indicate that the buttons are
disabled.

comes on/goes off on

8.10 Time Dry

Touch this button to set the time that
suits the fabrics you have to dry (refer to
"Timed drying" table). The display shows
the set value.

Each time you touch this button the time
value increases by 5 minutes.

You cannot set all time
values for different types of
fabrics.

8.11 Auto Dry

Touch this button to set one the
automatic dryness levels proposed by
the appliance.

On the display the relevant dryness
indicator goes on:

• Iron dry: laundry to be ironed.

• Cupboard dry: laundry to be put
in store.

Extra dry: laundry to be fully dried.

•

You can not set all
automatic levels for each
type of fabrics.

8.12 Delay Start

With this option you can delay the start of
a programme to a more convenient time.

Touch the button repeatedly to set the
required delay. The time increases in
steps of 1 hour up to 20 hours.

The corresponding indicator above the
touch button illuminates.

The display shows the selected delay

time. After touching the Start/Pause
button, the appliance begins the
countdown and the door is locked.

8.13 Start/Pause

Touch the Start/Pause button to
start, pause the appliance or interrupt a
running programme.

www.electrolux.com18

9. PROGRAMMES

9.1 Programme Chart

Programme
Default tempera‐
ture
Temperature
range

Eco 40-60 (Wash
only mode)

1)

40 °C

Eco 40-60 + Cup‐
board dry level
(Wash & Dry
mode)

2)

40 °C

Eco 40-60 + Cup‐
board dry level
(Dry only mode)

Cotton
40 °C
90 °C - Cold

Synthetics
40 °C
60 °C - Cold

Delicate
30 °C
40 °C - Cold

Wool
40 °C
40 °C - Cold

Refer‐
ence spin
speed
Spin
speed
range

1600 rpm
1600 rpm

- 400 rpm

1600 rpm
1600 rpm

- 1000
rpm

-

1600 rpm
(1600­400 rpm)

1200 rpm
(1200 ­400 rpm)

1200 rpm
(1200­400 rpm)

1200 rpm

(1200 -

400 rpm)

Maxi‐

mum

load

8 kg

5 kg

5 kg White cotton and fast-coloured cotton.

8 kg White cotton and coloured cotton. Nor‐

3 kg Synthetic items or mixed fabric items.

2 kg Delicate fabrics such as acrylics, vis‐

1.5 kg Machine washable wool, hand washable

White cotton and fast-coloured cotton.
Normally soiled items.

mally, heavily and lightly soiled items.

Normally soiled items.

cose and mixed fabrics requiring gentler
washing. Normally and lightly soiled items.

wool and other fabrics with «hand wash‐

ing» care symbol3).

Programme description

(Type of load and level of soiling)

ENGLISH 19

Programme
Default tempera‐
ture
Temperature
range

Refer‐
ence spin
speed
Spin
speed

Maxi‐

mum

load

Programme description

(Type of load and level of soiling)

range

Steam programme with FreshScent System

Steam programme can be used for reducing wrinkles and odours4) of garments that
just need to be refreshed, avoiding washing. The fabric fibres are relaxed and after‐
wards ironing becomes effortless. When the programme is completed, quickly re‐

5)

move the laundry from the drum

. Steam programmes do not perform any hygienic

cycle. Do not set this programme with the following type of items:

• Items that are not suitable for tumble drying.

• Items with label "Dry clean only".
ELECTROLUX fragrance. If you use this special gentle fragrance, your laundry will

scent as just washed: pour a single dose bottle in the compartment and simply
start a steam programme. Reduce the fragrance dosage when treating smaller load.
By means of the Time Manager button, you can reduce the programme duration
when treating items labeled to be washed at low temperature.
DO NOT:

• Tumble dry the garments treated with fragrance. Its benefit would evaporate.

• Use the fragrance with different purposes than those here described.

• Use the fragrance on new garments. New garments may contain residual finishing
compounds which are not compatible with it.

The fragrance dose bottles are available on ELECTROLUX web shop or
by authorised dealer.

1 kg Cottons, Synthetics, Delicates. Short and

FreshScent

gentle steam programme to refresh even
your very delicate garments, including very
delicate garments with sequins, lace etc.
When treating smaller loads, the pro‐

-

gramme duration can be further reduced by
means of the Time Manager option.

WARNING!

Do not use this programme
with wool and garments label‐
led as dry-clean only.

Spin/Drain

1600 rpm
(1600 ­400 rpm)

8 kg All fabrics, except woollens and delicate

fabrics. To spin the laundry and to drain
the water in the drum.

www.electrolux.com20

Programme
Default tempera‐
ture
Temperature
range

Rinse

Machine Clean
60 °C

Refer‐
ence spin
speed
Spin
speed
range

1600 rpm
(1600­400 rpm)

1200 rpm
(1200 ­400 rpm)

Maxi‐

mum

Programme description

(Type of load and level of soiling)

load

8 kg All fabrics, except woollens and very

delicate fabrics. Programme for rinsing

and spinning the laundry. The default spin
speed is the one used for cotton pro‐
grammes. Reduce the spin speed accord‐
ing to the type of laundry. If necessary, set
the Extra Rinse option to add rinses. With a
low spin speed, the appliance performs deli‐
cate rinses and a short spin.

Maintenance cycle with hot water to clean
and freshen the drum and to remove resi‐
due that may cause odour. For the best re‐
sult use this cycle once a month. Before
running this cycle, remove all items from the
drum. In the washing phase compartment of
the detergent dispenser, put the flap of the
compartment in upward position. Pour a
cup of chlorine bleach or a washing ma‐
chine cleaner in the washing phase com‐

­partment. DO NOT use both together.

After the drum cleaning, run a
further rinse cycle with empty
drum and no detergent to re‐
move any residue of bleach.

Anti-Allergy
60 °C

1600 rpm
(1600 ­400 rpm)

If you set this programme with the Dry, the
appliance performs the anti-fluff action. Re‐
fer to chapter 'Fluff in the fabrics'.

8 kg White cotton items. This high-performance

wash program combined with steam va‐
pour, removes more than 99,99% of bacte‐

ria and viruses6) keeping the temperature
above 60°C throughout the washing phase;
with an additional action on the fibers
thanks to a vapour phase, an enhanced
rinsing phase ensures a proper removal of
detergent and micro-organism residues.
This program ensures also a proper reduc‐
tion of pollens/allergenic items.

ENGLISH 21

Programme
Default tempera‐
ture
Temperature
range

Outdoor
30 °C
40 °C - Cold

Denim
30 °C
40 °C - Cold

MixCare
30 °C
60 °C - 30 °C

Quick 20'
Wash&Dry 60'
30 °C
40 °C - 30 °C

Refer‐
ence spin
speed

Maxi‐

mum

load

Programme description

(Type of load and level of soiling)

Spin
speed
range

1200 rpm
(1200­400 rpm)

2 kg

Do not use fabric softener and
make sure that there is no soft‐
ener residue in the detergent
dispenser.

Outdoor clothing, technical, sport fab‐
rics, waterproof and breathable jackets,
shell jackets with a removable fleece or
inner insulation.

By performing a combined
wash and dry programme, the
drying phase also acts as wa‐
ter-repellent restorer. Make
sure that the garment care la‐
bel permits tumble drying.

1200 rpm
(1200 ­400 rpm)

3 kg Special programme for Denim clothing

with delicate washing phase to minimize
colour fading and marks. For better care

a reduced load size is recommended.

1600 rpm
(1600 ­400 rpm)

5 kg Programme to treat mixed fabrics (cotton

and synthetic items) up to 5 kg. Complete
washing programme that washes the daily
soiled laundry efficiently at 30 °C and en‐
sures a good performance in only 69 mi‐
nutes. Add a drying phase to have a com‐
plete wash&dry treatment.

1200 rpm 1 kg Programme to treat up to 1 kg of mixed

synthetic shirts load in 20 minutes only.
Add a drying phase to have a complete
wash&dry treatment in 60 minutes.

www.electrolux.com22

Programme
Default tempera‐
ture
Temperature
range

Refer‐
ence spin
speed
Spin
speed

Maxi‐

mum

load

Programme description

(Type of load and level of soiling)

range

Reset position. The display shows dashes only.

1)

According to Commission Regulation EU 2019/2023. This programme at default tem‐

perature and spin speed, in washing only mode, with rated capacity 8 kg is able to clean
normally soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the
same cycle.

For the reached temperature in the laundry, the programme duration and other
data, please refer to 'Consumption Values' chapter.
The most efficient programmes in terms of energy consumption are generally
those that perform at lower temperatures and longer duration.

2)

According to Commission Regulation EU 2019/2023. This programme at default tem‐

perature and spin speed, in washing and drying mode, with rated capacity 5 kg and with
Cupboard dry level performs the wash and dry cycle able to clean normally soiled cotton
laundry declared to be washable at 40 °C or 60 °C, together in the same cycle and, after
drying phase, the laundry can be immediately stored in a cupboard.

3)

During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the

drum doesn't rotate or doesn't rotate properly, but this is normal for this programme.

4)

Steam programme doesn't remove particularly intense odour.

5)

After the steam treatment the laundry can be humid. Hang items out for a few minutes.

6)

Tested for Staphylococcus aureus, Enterococcus faecium, Candida albicans, Pseudomo‐
nas aeruginosa and MS2 Bacteriophage in external test performed by Swissatest Testma‐
terialien AG in 2021 (Test Report No. 202120117).

Programme options compatibility

Programme

Eco 40-60

Cotton

Synthetics

Delicate

Spin

No Spin

Prewash

Time Manager

■ ■ ■ ■ ■ ■ ■

■ ■ ■ ■ ■ ■ ■

■ ■ ■ ■ ■ ■ ■

■ ■ ■ ■ ■

Delay Start

Programme

ENGLISH 23

Wool

FreshScent

Spin/Drain

Rinse

Machine Clean

Anti-Allergy

Outdoor

Denim

MixCare

Spin

No Spin

Prewash

Time Manager

■ ■ ■ ■

■ ■

■

1)

■

■

■ ■ ■ ■ ■

■ ■ ■

■ ■ ■ ■ ■ ■

■ ■ ■ ■ ■

■ ■ ■ ■ ■

■ ■ ■ ■ ■

Delay Start

Quick 20' Wash&Dry 60'

1)

If you set the No Spin option, the appliance performs draining only.

■

Suitable detergents for each programme

Programme Universal

powder

1)

Liquid Uni‐
versal

Liquid for
coloureds

Delicates
woollens

Special

Eco 40-60 ▲ ▲ ▲ -- --

Cotton ▲ ▲ ▲ -- --

Synthetics ▲ ▲ ▲ -- --

Delicate -- -- -- ▲ ▲

Wool -- -- -- ▲ ▲

www.electrolux.com24

Programme Universal

powder

Anti-Allergy ▲ ▲ -- -- ▲

Outdoor -- -- -- ▲ ▲

Denim -- -- ▲ ▲ ▲

MixCare ▲ ▲ ▲ -- --

Quick 20'
Wash&Dry
60'

1)

At temperature higher than 60 °C the use of powder detergent is recommended.

▲ = Recommended

-- = Not recommended

-- ▲ ▲ -- --

9.2 Woolmark Apparel Care ­Blue

• The wool wash cycle of this machine

has been approved by The Woolmark

1)

Liquid Uni‐
versal

Liquid for
coloureds

Company for the washing of wool
garments labelled as "hand wash"
provided that the garments are
washed according to the instructions
issued by the manufacturer of this
washing machine. Follow the garment
care label for drying and other laundry
instructions. M2103

• The wool drying cycle of this machine
has been approved by The Woolmark
Company for the drying of wool
garments labelled as "hand wash"
provided that the garments are dried
according to the instructions issued by
the manufacturer of this machine.
Follow the garment care label for
other laundry instructions. M2104

The Woolmark symbol is a Certification
mark in many countries.

Delicates
woollens

Special

9.3 Automatic drying

Initial cycle times for programmes with Auto Dry
option are only estimates, the actual drying time
may slightly differ from the time displayed.

Dryness Level Type of fabric Load

Extra Dry

For towelling materials

Cottons and Linen

(bathrobes, bath towels,
etc)

Denim garments up to 3 kg

up to 5 kg

ENGLISH 25

Dryness Level Type of fabric Load

Cottons and Linen

Cupboard Dry

For items to be stored

Synthetics and mixed

Delicate fabrics

Wool items

Outdoor sporting gar‐

Denim garments up to 3 kg

Iron Dry

Suitable for ironing

(bathrobes, bath towels,
etc)

fabrics

(jumpers, blouses, under‐
wear, household and bed
linen)

(acrylics, viscose and deli‐
cate mixed fabrics)

(woollen jumpers)

ments

(outdoor clothing, technical,
sport fabrics, waterproof
and breathable jackets,
shell jackets)

Cottons and Linen

(sheets, tablecloths, shirts,
etc)

up to 5 kg

up to 3 kg

up to 2 kg

up to 1 kg

up to 2 kg

up to 5 kg

9.4 Timed drying

Dryness Level Type of fabric Load

Extra Dry

For towelling
materials

3 1600 110 - 130

1 1600 50 - 60

Denim garments 3 1200 120 - 140

1 1200 70 - 90

Cupboard Dry

For items to be
stored

3 1600 100 - 120

1 1600 40 - 50

Cottons and Linen

(bathrobes, bath towels, etc) 5

Cottons and Linen

(bathrobes, bath towels, etc)

Spin

(kg)

speed
(rpm)

1600 170 - 190

5 1600 160 - 180

Suggested
duration
(mins)

www.electrolux.com26

Dryness Level Type of fabric Load

Synthetics and mixed fabrics

1 1200 45 - 55

Delicates

1 1200 60 - 80

Wool

Outdoor sporting garments

Denim garments 3 1200 110 - 130

1 1200 60 - 80

Iron Dry

Suitable for
ironing

3 1600 55 - 75

1 1600 30 - 40

(jumpers, blouses, underwear,
household and bed linen)

(acrylics, viscose and delicate mixed
fabrics)

(woollen jumpers)

(outdoor clothing, technical, sport
fabrics, waterproof and breathable
jackets, shell jackets)

1 1200 80 - 90

Cottons and Linen

(sheets, tablecloths, shirts, etc)

Spin

(kg)

speed
(rpm)

3 1200 80 - 100

2 1200 100 - 120

1 1200 110 - 130

2 1200 120 - 140

5 1600 90 - 110

Suggested
duration
(mins)

10. SETTINGS

10.1 Acoustic signals

This appliance has different acoustic
signals, that operate when:

• You activate the appliance (special
short tune).

• You deactivate the appliance (special
short tune).

• You touch the buttons (click sound).

• You make an invalid selection (3 short
sounds).

• The programme is completed
(sequence of sounds for about 2
minutes).

• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).

To activate/deactivate the acoustic
signals when the programme is
completed, touch the Mode and the
Temp. buttons simultaneously for about
2 seconds. The display shows On or Off.

If you deactivate the
acoustic signals, they
continue to operate when
the appliance has a
malfunction.

11. BEFORE FIRST USE

ENGLISH 27

1. Make sure that the electrical power is

available and the water tap is open.

2. Pour 2 litres of water into the
detergent compartment marked by

.

This action activates the drain system.

3. Pour a small quantity of detergent

into the compartment marked by .

4. Set and start a programme for cotton

This removes all possible dirt from the
drum and the tub.

12. DAILY USE - WASHING ONLY

WARNING!

Refer to Safety chapters.

12.1 Activating the appliance

1. Connect the mains plug to the mains

socket.

2. Open the water tap.

3. Press the On/Off button for a few

seconds to activate the appliance.

A short tune sounds.

12.2 Loading the laundry

1. Open the appliance door.

2. Empty the pockets and unfold the

items before you put them in the
appliance.

3. Put the laundry in the drum, one item
at a time.

Do not put too much laundry in the drum.

4. Close the door firmly.

12.3 Filling the detergent and

additives

at the highest temperature without
any laundry in the drum.

CAUTION!

Make sure that no laundry
gets caught between the
seal and the door to avoid
risk of water leakage and
damage to the laundry.

Washing heavily oiled,
greasy stains could cause
damage to rubber parts of
the washing machine.

- Compartment for prewash
phase, soak programme or stain re‐
mover.

- Compartment for washing
phase.

www.electrolux.com28

- Compartment for fabric softener
and other liquid treatments(fabric condi‐
tioner, starch).

- Maximum level for quantity of

liquid additives.

- Flap for powder or liquid deter‐

gent.

Always follow the
instructions that you find on
the packaging of the
detergent products, but we
recommend that you do not
exceed the maximum

indicated level ( ). This
quantity will however
guarantee the best washing
results.

After a washing cycle, if
necessary, remove any
detergent residue from the
detergent dispenser.

12.4 Check the position of the detergent flap

1. Pull out the detergent dispenser until
it stops.

2. Press the lever down to remove the
dispenser.

3. To use powder detergent, turn the
flap up.

4. To use liquid detergent, turn the flap
down.

With the flap in the position DOWN:

• Do not use gelatinous or thick
liquid detergents.

• Do not exceed to liquid detergent
dose indicated on the flap.

• Do not set the prewash phase.

• Do not set the delay start function.

5. Measure out the detergent and the
fabric conditioner.

6. Carefully close the detergent
dispenser.

Make sure that the flap does not cause a
blockage when you close the drawer.

12.5 Setting a programme

1. Turn the programme dial to select the

desired washing programme. The
first programme on the top right of
the programme dial is Eco 40-60, the
programme to which the information
of the energy label relates.

The indicator of Wash button illuminates.

The indicator of the Start/Pause
button flashes.
The display shows an indicative
programme duration.

2. To change the temperature and/or
the spin speed, touch the related
buttons.

ENGLISH 29

3. If desired, set one or more options by

touching the related buttons. The
related indicators illuminate on the
display and the given information
changes accordingly.

If a selection is not possible
an acoustic signal sounds
and the display shows

.

12.6 Starting a programme

Touch the Start/Pause button to start
the programme. It is not possible to start
the programme when the indicator of the
button is off and doesn't flash (e.g. the
door is open).

The related indicator stops flashing and
stays on.
The programme starts, the door is
locked. The display shows the indicator

.

The drain pump can operate
shortly before the appliance
fills water.

12.7 Starting a programme with the delay start

1. Touch the Delay Start button
repeatedly until the display shows the
desired delay time. The related
indicator comes on.

2. Touch the Start/Pause button.
The appliance door locks and starts
the countdown of the delay start. The

display shows the indicator .

When the countdown is completed, the
programme starts automatically.

Cancelling the delay start after the countdown has started

To cancel the delay start:

1. Touch the Start/Pause button to
pause the appliance. The related
indicator flashes.

2. Touch the Delay Start button

repeatedly until the display shows

3. Touch the Start/Pause button
again to start the programme
immediately.

Changing the delay start after the countdown has started

To change the delay start:

1. Touch the Start/Pause button to
pause the appliance. The related
indicator flashes.

2. Touch the Delay Start button
repeatedly until the display shows the
desired delay time.

3. Touch the Start/Pause button
again to start the new countdown.

12.8 The SensiCare System

load detection

The programme duration in
the display is referred to a
medium/high load.

After touching the Start/Pause
button, the SensiCare System starts the
laundry load detection:

1. The appliance detects the load in the
first 30 seconds. During this phase

the Time Manager bars
below the time digits play a simple
animation, the drum rotates shortly.

2. The programme duration will be
adjusted accordingly and could
increase or decrease. After further 30
seconds, the water filling starts.

At the end of the load detection, in case

of drum overload, the indicator
flashing in the display:

In this case, for 30 seconds, it is possible
to pause the appliance and remove the
exceeding garments.

Once removed the exceeding garments,

touch the Start/Pause button to start
the programme again. The SensiCare
phase can be repeated up to three times
(see point 1).

Important! If the laundry amount will not
be reduced, the washing programme
starts anyway, despite the overload. In
this case, it will be not possible to

.

guarantee the best washing results.

placed

is

www.electrolux.com30

About 20 minutes after the
programme start, the
programme duration could
be adjusted again depending
on the capacity of water
absorption of the fabrics.

The SensiCare detection is
carried out with complete
washing programmes only
and if the programme
duration has not been
reduced by means of the
Time Manager button.

The SensiCare is not
available with some
programmes, such as Wool,
Rinse, Spin and
programmes with short
cycles.

12.9 Interrupting a programme and changing the options

When the programme is running, you
can change only some options:

1. Touch the Start/Pause button.

The related indicator flashes.

2. Change the options. The given
information in the display changes
accordingly.

3. Touch the button Start/Pause
again.

The washing programme continues.

If the SensiCare System has
completed and the water
filling has already started,
the new programme starts

without repeating the
SensiCare System. The

water and the detergent are
not drained out in order to
avoid waste. The display
shows the maximum
duration of the programme,
updating it about 20 minutes
after the starting of the new
programme.

There is also an alternative way of
cancelling:

1. Rotate the selector knob to the "Reset"

position .

2. Wait for 1 second. The display shows

.
Now, you can set a new washing
programme.

12.11 Opening the door ­Adding garments

If the temperature and level
of the water in the drum are
too high and/or the drum is
still rotating you should not
open the door.

While a programme or the delay start
operates, the appliance door is locked.

The display shows the indicator

.

12.10 Cancelling a running programme

1. Press the button On/Off to cancel the
programme and to deactivate the
appliance.

2. Press the button On/Off again to
activate the appliance.

1. Touch the Start/Pause

In the display the related door lock
indicator goes off.

2. Open the appliance door. If
necessary, add or remove the items.
Close the door and touch the Start/

Pause

The programme or the delay start
continues.

button.

button.

12.12 End of the programme

When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are

active). The display shows

ENGLISH 31

The indicator of the Start/Pause
button goes off.

The door unlocks and the indicator
goes off.

1. Press button On/Off to deactivate the
appliance.

After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.

When you activate the
appliance again, the display
shows the end of the
previous programme. Turn
the programme dial to set a
new cycle.

2. Remove the laundry from the
appliance.

3. Make sure that the drum is empty.

4. Keep the door and the detergent

dispenser slightly ajar to prevent
mildew and odours.

12.13 Draining water out after

end of cycle

If you have chosen a programme or an
option that does not empty out the water
of the last rinse, the programme is
completed, but:

• The time area shows and the

display shows the door locked .

• The indicator of the Start/Pause

button starts flashing.

• The drum still turns at regular

intervals to prevent creases in the
laundry.

• The door stays locked.

• You must drain the water to open the

door:

1. If necessary, touch the Spin button to
decrease the spin speed proposed
by the appliance.

2. Press the Start/Pause button: the
appliance drains the water and spins.

The option indicator Rinse Hold
disappears.

If you have selected No Spin

, the appliance will

only drain the water.

3. When the programme is completed

and the door locked indicator
goes off, you can open the door.

4. Press the On/Off button for a few
seconds to deactivate the appliance.

12.14 Stand-by function

The Stand-by function automatically
deactivates the appliance to reduce the
energy consumption when:

• You do not use the appliance for 5

minutes when no programme is
running.
Press the button On/Off to activate
the appliance again.

• 5 minutes after the end of the washing

programme.
Press the On/Off button to activate
the appliance again.
The display shows the end of the last
programme.
Turn the programme dial to set a new
cycle.

If the dial is rotated to the "Reset"

position , the appliance automatically
turns off in 30 seconds.

If you set a programme or an
option that ends with water
in the drum, the Stand-by
function doesn't deactivate
the appliance to remind you
to drain the water.

13. DAILY USE - WASHING & DRYING

WARNING!

Refer to Safety chapters.

This appliance is an
automatic washer dryer.

www.electrolux.com32

13.1 Complete wash&dry

programme

Non-automatic wash&dry programmes

In some washing programmes, you can
combine Wash and Dry for running a
complete wash&dry programme.

Proceed as follows:

1. Press the On/Off button for some
seconds to activate the appliance.

2. Load the laundry one item at a time.

3. Put the detergent and the additives in

the appropriate compartment.

4. Turn the programme dial to the
washing programme. The appliance
defaults to the washing only mode
and the indicator of the Wash button
is on. The display shows the default
temperature and spin. If necessary,
change them according to your
laundry.

5. Set the desired options, if there are
available.

6. Tap on the Mode button once to
activate also the drying function. Both
indicators of the Wash and Dry

buttons are on. The indicator
appears on the display.

13.2 Washing and Drying -

Automatic levels

1. Tap on the Auto Dry button
repeatedly until the display shows the
required dryness level. The indicators
in the display illuminate accordingly:

a. Iron dry: for cotton items;

b. Cupboard dry: for cotton and

synthetic items;

c. Extra dry: for cotton items.

The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load
size.

To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.

2. Touch button Start/Pause to start
the programme. The SensiCare
estimation starts.

In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.

13.3 Washing and Timed

Drying

1. Tap on the Time Dry button
repeatedly to set the desired time
value (see the "Timed drying" table
the "Programmes" chapter). The

drying level indicator goes off and

the indicator comes on.

Each time you tap on this button the time
value increases by 5 minutes. The
display shows the set new time value.

2. Touch the Start/Pause button to
start the programme. The SensiCare
estimation starts.

In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.

13.4 At the end of the drying

programme

• The appliance stops automatically.

• The acoustic signals operate (if they

are active).

• In the display comes on.

• The indicator of the Start/Pause

button goes off. The door locked
indicator goes off and the door
unlocks.

• Press the On/Off button for some

seconds to deactivate the appliance.

After some minutes from
the end of the
programme, the energy
saving function
deactivates the appliance
automatically.

1. Remove the laundry from the
appliance.

2. Make sure that the drum is empty.

After drying phase, clean the
drum, the seal and the inside
of the door with a wet cloth.

14. DAILY USE - DRYING ONLY

ENGLISH 33

WARNING!

Refer to Safety chapters.

This appliance is an
automatic washer dryer.

14.1 Preparation to drying

1. Press the On/Off button for some

seconds to activate the appliance.

2. Load the laundry one item at a time.

3. Turn the programme dial to the

programme suitable for the items to
dry. The appliance defaults to the
washing only mode and the indicator
of the Wash button is on.

4. Tap on the Mode button twice to
perform drying only. The indicator of
Dry button illuminates and the
indicator of Wash button goes off.

When drying a big amount of
laundry, to have good drying
performances, make sure
that the laundry itself is not
rolled up and that is
uniformly distributed in the
drum.

14.2 Drying - Automatic levels

1. Tap on the Auto Dry button

repeatedly until the display shows the
required dryness level. The indicators
in the display illuminate accordingly:

a. Iron dry: for cotton items;

b. Cupboard dry: for cotton and

synthetic items;

c. Extra dry: for cotton items.

The display shows the drying
programme duration.

2. Touch the Start/Pause button to

start the programme.

In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.

14.3 Timed Drying

1. Tap on the Time Dry button

repeatedly to set the desired time
value (see the "Timed drying" table
the "Programmes" chapter). The

drying level indicator

the indicator comes on.

Each time you tap on this button the time
value increases by 5 minutes. The
display shows the set new time value.

2. Touch the Start/Pause to start

the programme.

In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.

goes off and

14.4 At the end of the drying programme

• The appliance stops automatically.

• The acoustic signals operate (if they

are active).

• In the display comes on.

• The indicator of the Start/Pause

button goes off. The door locked
indicator goes off and the door
unlocks.

• Press the On/Off button for some

seconds to deactivate the appliance.

After some minutes from
the end of the
programme, the energy
saving function
deactivates the appliance
automatically.

1. Remove the laundry from the

appliance.

2. Make sure that the drum is empty.

After drying phase, clean the
drum, the seal and the inside
of the door with a wet cloth.

www.electrolux.com34

15. FLUFF IN THE FABRICS

During the washing and/or drying phase,
some types of fabric, (sponge, wool,
sweatshirt) could release fluff.

The released fluff could stick to the
fabrics during the next cycle.

This inconvenient increases with
technical fabrics.

To prevent the fluff in your laundry, we
recommend that you:

• To do not wash dark fabrics after you
washed and dried light coloured
fabrics (hand towel, wool, sweatshirt )
and the contrary.

• To dry this type of fabrics at open air
when they are washed the first time.

• To clean the drain filter.

• After the drying phase, clean the
empty drum, the gasket and the door
with a wet cloth.

16. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

16.1 The laundry load

• Divide the laundry into: white,
coloured, synthetics, delicates and
wool.

• Follow the washing instructions on the
laundry care labels.

• Do not wash white and coloured items
together.

• Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first couple of times.

• Turn multilayered fabrics, wool and
items with printed illustrations inside
out.

• Pre-treat stubborn stains.

• Wash stubborn stains with a special
detergent.

• Be careful with curtains. Remove the
hooks and put the curtains in a
washing bag or pillowcase.

• A very small load can cause balance
problems with the spin phase leading
to excessive vibration. If this occurs:

To remove the fluff inside the drum,
set a special programme:

• Empty the drum.

• Clean the drum, the gasket and the
door with a wet cloth.

• Set the Machine Clean programme
and the Dry together to activate the
anti-fluff action.

• Touch the Start/Pause button to
start the programme.

If the appliance is frequently
used, carry out the cleaning
programme regularly.

a. interrupt the programme and

open the door (refer to "Daily
Use" chapter);

b. manually redistribute the load so

that the items are spaced evenly
around the tub;

c. press the Start/Pause button.

The spin phase continues.

• Button up pillowcases, close zippers,
hooks and poppers. Tie up belts,
cords, shoelaces, ribbons and any
other loose elements.

• Do not wash laundry without hems or
with cuts. Use a washing bag to wash
small and/or delicate items (e.g.
underwired bras, belts, tights,
shoelaces, ribbons, etc. ).

• Empty pockets and unfold the items.

16.2 Stubborn stains

For some stains, water and detergent is
not sufficient.

We recommend that you pre-treat these
stains before you put the items in the
appliance.

Special stain removers are available.
Use the special stain remover that is
applicable to the type of stain and fabric.

Do not spray stain remover on garments
near the appliance as it is corrosive to
the plastic parts.

16.3 Detergent type and quantity

The choice of detergent and use of
correct quantities not only affects your
wash performance, but also helps to
avoid waste and protect the environment:

• Use only detergents and other
treatments specially made for
washing machines. First, follow these
generic rules:

– powder detergents (also tablets

and single-dose detergents) for all
types of fabric, excluding delicate.
Prefer powder detergents
containing bleach for whites and
laundry sanitization,

– liquid detergents (also single-dose

detergents) , preferably for low
temperature wash programmes

ENGLISH 35

(60 °C max) for all types of fabric,
or special ones for woollens only.

• The choice and quantity of detergent
will depend on: type of fabric
(delicates, woollens, cottons, etc), the
colour of clothes, size of the load,
degree of soiling, wash temperature
and hardness of the water used.

• Follow the instructions that you find
on packaging of the detergents or
other treatments without exceeding

the indicated maximum level ( ).

• Do not mix different types of
detergents.

• Use less detergent if:

– you are washing a small load,
– the laundry is lightly soiled,
– there is large amounts of foam

during washing.

• When using detergent tabs or pods,
always put them inside the drum, not
in the detergent dispenser and follow
the manufacturer's
recommendations .

Insufficient detergent may cause:

• unsatisfactory washing results,

• the wash load to turn grey,

• greasy clothes,

• mould in the appliance.

Excessive detergent may cause:

• sudsing,

• reduced washing effect,

• inadequate rinsing,

• a greater impact for the environment.

16.4 Ecological hints

To save water, energy and to help
protect the environment, we recommend
that you follow these tips:

• Normally soiled laundry may be
washed without prewash in order to
save detergent, water and time (the
environment is protected too!).

• Loading the appliance to the

maximum capacity indicated for
each programmes helps to reduce
energy and water consumption.

• With adequate pre-treatment, stains
and limited soiling can be removed;
the laundry can then be washed at a
lower temperature.

• To use the correct quantity of
detergent, refer to the quantity
suggested by the detergent producer

www.electrolux.com36

and check the water hardness of you
domestic system. Refer to 'Water
hardness'.

• Set the maximum possible spin
speed for the selected programme for
saving energy during drying phase!

16.5 Water hardness

If the water hardness in your area is high
or moderate, we recommend that you
use a water softener for washing
machines. In areas where the water
hardness is soft it is not necessary to use
a water softener.

To find out the water hardness in your
area, contact your local water authority.

Use the correct quantity of water
softener. Follow the instructions that you
find on the packaging of the product.

16.6 Prepare the drying cycle

• Open the water tap.

• Check if the drain hose is connected
properly. Refer to installation chapter
for more information.

• For the maximum laundry load of the
drying programmes, refer to the
drying programmes table.

16.7 Items not suitable for

drying

Do not set a drying programme for
this laundry:

• Synthetic curtains.

• Pieces of clothing with metal inserts.

• Nylon stockings.

• Quilts.

• Bed covers.

• Duvets.

• Anoraks.

• Sleeping bags.

• Fabrics with residue of hair sprays,
nail solvents or similar.

• Garments with foam-rubber or
materials similar to foam-rubber.

•

= The item can be tumble dried

• = The drying cycle is at high
temperature

• = The drying cycle is at reduced
temperature

• = The item can not be tumble
dried.

16.9 Drying cycle duration

The drying time can change depending
on:

• speed of the last spin

• dryness level

• type of laundry

• weight of the load

16.10 Additional drying

If, at the end of the drying programme,
the laundry is still damp, set a short
drying cycle again.

WARNING!
To avoid creasing and
shrinkage do not overdry
the laundry.

16.11 General Tips

Refer to the «Drying programmes» table
to find the average drying times.
Experience will help you to dry the
laundry better. Take note of the duration
of the cycles done before.

To avoid the static charge at the end of
the drying cycle:

1. Use fabric conditioner in the washing

cycle.

2. Use special fabric conditioner for

tumble dryers.

When the drying programme is
completed remove the laundry promptly.

16.8 Garment labels

When you dry the laundry, obey the
indications on the labels of the
manufacturers:

17. CARE AND CLEANING

ENGLISH 37

WARNING!

Refer to Safety chapters.

17.1 Periodic cleaning schedule

Periodic cleaning helps to extend the
life of your appliance.

After each cycle, keep the door and the
detergent dispenser slightly ajar to get air
circulation and dry the humidity inside
the appliance: this will prevent mildew
and odours.

If the appliance is not used for a long
time: close the water tap and unplug the
appliance.

Indicative periodic cleaning schedule:

Descaling Twice a year

Maintenance wash Once a month

Clean door seal Every two months

Clean drum Every two months

Remove fluff inside
the drum

Clean detergent
dispenser

Clean drain pump
filter

Clean the inlet
hose and the valve
filter

1)

Refer to ''Fluff in the fabrics'' chapter.

The following paragraphs explain how
you should clean each part.

Twice a month

Every two months

Twice a year

Twice a year

1)

17.2 Removing foreign objects

Make sure that pockets are
empty and all loose
elements are tied up before
running your cycle. Refer to
'The laundry load' in 'Hints
and tips'.

Remove any foreign objects (such as
metal clip, buttons, coins, etc) that you
may find in the door seal, the filters and

the drum. Refer to 'Door seal with double
lip trap', 'Cleaning the drum', 'Cleaning
the drain pump' and 'Cleaning the inlet
hose and the valve filter' paragraphs. If
necessary, please contact the Authorised
Service Centre.

17.3 External cleaning

Clean the appliance with mild soap and
warm water only. Fully dry all the
surfaces. Do not use a scouring pads or
any scratching material.

CAUTION!

Do not use alcohol, solvents
or chemical products.

CAUTION!

Do not clean the metal
surfaces with chlorine-based
detergent.

17.4 Descaling

If the water hardness in your
area is high or moderate, we
recommend that you use a
water descaling product for
washing machines.

Regularly examine the drum to check for
limescale.

Regular detergents already contain water
softening agents, but we recommend to
run a cycle with an empty drum and a
descaling product.

Always follow the
instructions that you find on
the packaging of the
product.

17.5 Maintenance wash

The repeated and prolonged use of low
temperature programmes can cause
detergent deposits, fluff residues,
bacterial growth inside the drum and the
tub. This could generate bad odours and
mildew. To eliminate these deposits and
clean the inner part of the appliance, run
a maintenance wash regularly (at least
once a month).

2

1

www.electrolux.com38

Refer to "Cleaning the drum"
paragraph.

17.6 Door seal with double lip trap

This appliance is designed with a self
cleaning draining system, allowing light
fluff fibers that fall off the clothes to be
drained out with the water. Regularly
examine the seal. Coins, buttons, other
small items can be recovered at the end
of the cycle.

Clean it when needed, using ammonia
cream cleanser agent without scratching
the seal surface.

Always obey the instructions
that you find on the
packaging of the product.

Always follow the
instructions that you find on
the packaging of the
product.
Do not clean the drum with
acidic descaling products,
scouring products containing
chlorine or iron or steel wool.

For a thorough clean:

1. Remove all laundry from the drum.

2. Run the Machine Clean programme.

For more details, refer to washing

programme table.

3. Add a small quantity of powder

detergent into the empty drum, in

order to rinse out any left residues.

17.8 Cleaning the detergent dispenser

To prevent possible deposits of dried
detergent or clotted fabric softener
and/or formation of mould in the
detergent dispenser drawer, once in a
while carry out the following cleaning
procedure:

1. Open the drawer. Press the catch

downwards as indicated in the

picture and pull it out.

Check and remove objects (if there are
any) that could be trapped in the fold.

Make sure that no laundry remains
between the seal and the door.

Use a moist cloth to wipe off any dirt or
water residue left behind in the door seal
after completion of program cycle.

17.7 Cleaning the drum

Regularly examine the drum to prevent
unwanted deposits.

Rust deposits in the drum may occur due
to rusting foreign body in the washing or
tap water containing iron

Clean the drum with special products for
stainless steel.

2. Remove the top part of the additive

compartment to aid cleaning and

flush it out under running warm

water, to remove any traces of

accumulated detergent. After

cleaning, put the top part back into

position.

3. Make sure that all detergent residue

1

2

is removed from the upper and lower
part of the recess. Use a small brush
to clean the recess.

ENGLISH 39

Regularly check the drain
pump filter and make sure
that it is clean.

Clean the drain pump if:

• The appliance does not drain the
water.

• The drum does not turn.

• The appliance makes an unusual
noise because of the blockage of the
drain pump.

• The display shows the alarm code

.

WARNING!

• Do not remove the filter
while the appliance
operates.

• Do not clean the pump if
the water in the appliance
is hot. Wait until the water
cools down

Proceed as follows to clean the pump:

1. Open the pump cover.

4. Insert the detergent drawer into the

guide rails and close it. Run the
rinsing programme without any
clothes in the drum.

2. Place a suitable bowl below the drain
pump access to collect the water that
flows out.

3. Open the chute downwards. Always
keep a rag nearby to dry up any
water spillages when removing the
filter.

17.9 Cleaning the drain pump

WARNING!

Disconnect the mains plug
from the mains socket.

1

2

2

1

www.electrolux.com40

4. Turn the filter 180 degrees in anti-

clockwise direction to open it, without
removing. Let the water flow out.

5. When the bowl is full of water, turn
the filter back and empty the
container.

6. Repeat the steps 4 and 5 until the
water stops to flow out.

7. Turn the filter anti-clockwise to
remove it.

contact the Authorised Service
Centre.

10. Clean the filter under the water tap.

11. Put the filter back into the special

guides by turning it clockwise. Make
sure that you tighten the filter
correctly to prevent leakages.

12. Close the pump cover.

8. If it is necessary, remove fluff and

objects from the filter recess.

9. Make sure that the impeller of the
pump can rotate. If it does not rotate,

2

1

When you drain the water with the

1

2

3

45°

20°

emergency drain procedure, you must
activate the drain system again:

a. Put 2 litres of water in the main

wash compartment of the
detergent dispenser.

b. Start the programme to drain the

water.

17.10 Cleaning the inlet hose and the valve filter

ENGLISH 41

17.11 Emergency drain

If the appliance cannot drain the water,
carry out the same procedure, described
in 'Cleaning the drain pump' paragraph. If
necessary, clean the pump.

When you drain the water with the
emergency drain procedure, you must
activate the drain system again:

1. Put 2 litres of water in the main wash
compartment of the detergent
dispenser.

2. Start the programme to drain the
water.

17.12 Frost precautions

If the appliance is installed in an area
where the temperature can reach values
around 0° C or drop below, remove the
remaining water from the inlet hose and
the drain pump.

1. Disconnect the mains plug from the
mains socket.

2. Close the water tap.

3. Put the two ends of the inlet hose in

a container and let the water flow out
of the hose.

4. Empty the drain pump. Refer to the
emergency drain procedure.

www.electrolux.com42

5. When the drain pump is empty,

install the inlet hose again.

18. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

18.1 Alarm Codes and Possible failures

The appliance does not start or it stops during operation. First try to find a solution to the
problem (refer to the tables).

WARNING!

Deactivate the appliance before carrying out any check.

With some problems, the display shows an alarm code and the

Start/Pause button may flash continuously:

If the appliance is overloaded, remove some items
from the drum and/or keep pressed the door while
touching the Start/Pause button until the indicator

stops flashing (see the picture below).

WARNING!

Make sure that the
temperature is higher than
0 °C before you use the
appliance again.
The manufacturer is not
responsible for damages
caused by low temperatures.

Problem Possible solution

The appliance does
not fill with water
properly.

The appliance does
not drain the water.

The appliance door
is open or not closed
correctly.

Internal fail. No com‐
munication between
electronic elements
of the appliance.

The mains supply is
unstable.

ENGLISH 43

• Make sure that the water tap is open.

• Make sure that the pressure of the water supply is not too
low. For this information, contact your local water authority.

• Make sure that the water tap is not clogged.

• Make sure that the inlet hose has no kinks, damages or
bends.

• Make sure that the connection of the water inlet hose is
correct.

• Make sure that the filter of the inlet hose and the filter of
the valve are not clogged. Refer to 'Care and cleaning'.

• Make sure that the sink spigot is not clogged.

• Make sure that the drain hose has no kinks or bends.

• Make sure that the drain filter is not clogged. Clean the fil‐
ter, if necessary. Refer to "Care and cleaning".

• Make sure that the connection of the drain hose is correct.

• Set the drain programme if you set a programme without
drain phase.

• Set the drain programme if you set an option which ends
with water in the tub.

• Make sure that the door is properly closed.

• The programme was not finished properly or the appliance
stopped too early. Switch the appliance off and on again.

• If the alarm code appears again, contact the Authorised
Service Centre.

• Wait until mains supply is stable.

If the display shows other alarm codes, deactivate and activate the
appliance. If the problem continues, contact the Authorised Service
Centre.
In case of different problem with the washing machine check the
table below for possible solutions.

www.electrolux.com44

Problem Possible solution

• Make sure that the mains plug is connected to the mains
socket.

• Make sure that the appliance door is closed.

• Make sure that there is no damaged fuse in the fuse box.

The programme does

not start.

• Make sure that the Start/Pause has been touched.

• If the delay start is set, cancel the setting or wait for the
end of countdown.

• Deactivate the Child Lock function if it is on.

• Check the position of the knob on the selected pro‐
gramme.

The appliance fills
with water and drains
immediately.

• Make sure that the drain hose is in the correct position.
The hose may be positioned too low. Refer to "Installation
instruction".

• Set the spin programme.

The spin phase does
not operate or the
washing cycle lasts
longer than usual.

• Make sure that the drain filter is not clogged. Clean the fil‐
ter, if necessary. Refer to "Care and cleaning".

• Adjust manually the items in the tub and start the spin
phase again. This problem may be caused by balance
problems.

• Make sure that the couplings of the water hoses are tight
and there is not water leakages.

There is water on the
floor.

• Make sure that the water inlet hose and the drain hose
have no damages.

• Make sure you use the correct detergent and the correct
quantity of it.

• Make sure that a washing programme that ends with water
in tub, has not been selected.

• Make sure that the washing programme is finished.

• Set the drain or the spin programme if there is water in the

You cannot open the
appliance door.

drum.

• Make sure that the appliance receives electrical power.

• This problem may be caused by a failure of the appliance.
Contact the Authorised Service Centre.
If you need to open the door, please read carefully "Emer‐
gency door opening".

• Make sure the levelling of the appliance is correct. Refer

The appliance makes
an unusual noise and
vibrates.

to "Installation instruction".

• Make sure that the packaging and/or the transit bolts are
removed. Refer to "Installation instruction".

• Add more laundry in the drum. The load may be too small.

The programme du‐
ration increases or
decreases during
programme execu‐

• The SensiCare System is able to adjust the programme
duration according to the type and the laundry load size.
Refer to "The SensiCare System load detection" in "Daily
Use" chapter.

tion.

Problem Possible solution

• Increase the detergent quantity or use a different deter‐
gent.

The washing results
are not satisfactory.

• Use special products to remove the stubborn stains before
you wash the laundry.

• Make sure that you set the correct temperature.

• Decrease the laundry load.

Too much foam in
the drum during the

• Reduce the quantity of detergent or the number of tablets
or single-dose detergents.

washing cycle.

After the washing cy‐
cle, there are some
detergent residues in
the dispenser drawer.

• Make sure that the flap is in the correct position (UP for
powder detergent - DOWN for liquid detergent).

• Make sure you have used the detergent dispenser accord‐
ing the indications given in this user manual.

• Turn the water tap on.

The appliance does
not dry or does not
dry correctly.

• Make sure the drain filter is not clogged.

• Reduce the laundry load.

• Make sure you have set the correct cycle. if necessary, set
again a short drying time.

The fabrics washed in the previous cycle released fluff of a
different colour:

The laundry is full of
different colours fluff.

• The drying phase helps to eliminate some fluff.

• Clean the clothes with a fluff remover.

In case of an excessive amount of fluff in the drum run the
special programme to clean it (refer to “Fluff in the fabrics" for
more details).

ENGLISH 45

After the check, activate the appliance. The programme continues
from the point of interruption.
If the problem occurs again, contact the Authorised Service Centre.
The necessary data for the service centre are on the rating plate.

18.2 Emergency door opening

In case of power failure or functioning
failure the appliance door remains
locked. The washing programme
continues when the power is restored. If
the door remains locked in case of
failure, it is possible to open it using the
emergency unlock function.

Before opening the door:

CAUTION!
Risk of burns! Make sure
that the water temperature
is not too high and the
laundry is not hot. If
necessary, wait until they
cool down.

To open the door, proceed as follows:

CAUTION!
Risk of injury! Make sure
that the drum is not
rotating. If necessary, wait
until the drum stops
rotating.

Make sure that the water
level inside the drum is
not too high. If necessary,
proceed with an
emergency drain (refer to
«Emergency drain» in
«Care and cleaning»
chapter).

www.electrolux.com46

1. Press the On/Off button to switch the

appliance off.

2. Disconnect the mains plug from the
mains socket.

3. Open the filter flap.

4. Pull the emergency unlock trigger

downward once. Pull it downward
once again, keep it tensed and, in the
meanwhile, open the appliance door.

19. CONSUMPTION VALUES

19.1 Introduction

See the web link www.theenergylabel.eu for
detailed information about Energy Label.

5. Take out the laundry and then close
the appliance door.

6. Close the filter flap.

The QR code on the energy label supplied with the
appliance provides a web link to the information
related to the performance of the appliance in the
EU EPREL database. Keep the energy label for
reference together with the user manual and all
other documents provided with this appliance.
It is also possible to find the same information in
EPREL using the link https://eprel.ec.europa.eu
and the model name and product number that you
find on the rating plate of the appliance. Refer to
'Product description' chapter for the position of the
rating plate.

19.2 Legend

kg Laundry load. h:mm Programme duration.

kWh Energy consumption. °C Temperature in the laundry.

Litres Water consumption. rpm Spin speed.

ENGLISH 47

% Remaining moisture at the end of the cycle. The higher is the spin speed,

the higher is the noise and the lower is the remaining moisture at the end of
washing cycle.

Values and programme duration may differ depending on different
conditions (e.g. room temperature, water temperature and pressure, load
size and type of laundry, supply voltage) and also if you change the
default setting of a programme.

19.3 According to Commission Regulation Eu 2019/2023

Washing only

Eco 40-60 pro‐
gramme

Full load 8 0.720 57 3:30 52 37 1600

Half load 4 0.539 42 2:45 52 36 1600

Quarter load 2 0.150 27 2:45 54 24 1600

1)

Maximum spin speed.

Wash and dry cycle

Eco 40-60 pro‐
gramme and
Cupboard dry
level

Full load 5 3.955 80 6:10 0 37 1600

Half load 2.5 2.190 43 4:20 0 35 1600

1)

Maximum spin speed.

Power consumption in different modes

Off (W) Stand-by (W) Delay start (W)

0.50 0.50 4.00

Time to Off/Standby mode is 15 minutes maximum.

kg kWh Litres h:mm % °C

kg kWh Litres h:mm % °C

rpm

rpm

1)

1)

19.4 Common programmes -

Washing only

These values are indicative only.

www.electrolux.com48

Programme

2)

Cotton
90°C

Cotton
60°C

3)

Cotton
20°C

Synthetics
40°C

Delicate

4)

30°C

Wool
30°C

1)

Maximum spin speed.

2)

Suitable for washing heavily soiled textiles.

3)

Suitable for washing lightly soiled cottons, synthetic and mixed fabrics.

4)

It also performs as quick washing cycle for lightly soiled laundry.

kg kWh Litres h:mm % °C

8 2.75 100 3:30 44 85 1600

8 1.95 95 3:10 44 55 1600

8 0.36 95 3:00 44 20 1600

3 0.60 60 2:10 35 40 1200

2 0.35 55 1:10 35 30 1200

1.5 0.40 50 1:10 30 30 1200

19.5 Common programmes ­Wash and dry

These values are indicative only.

rpm

1)

Programme

Synthetics
40°C

1)

Maximum spin speed.

kg kWh Litres h:mm % °C

3 1.80 70 3:25 1 40 1200

20. ENVIRONMENTAL CONCERNS

Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of

appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.

*

rpm

1)

www.electrolux.com/shop

157035490-A-272021