ETK7000/D, ETK8000/D, ETK7070/D
ETK8080/D, ETK7080/D
Electrolux Refrigeration Trim Kit
Installation Manual
3
CONGRATULATIONS
Dear customer,
Congratulations and thank you for choosing our trim kit.
We are sure you will find your new trim kit a pleasure to
use. Before you use the trim kit we recommend that you
read through the relevant sections of this manual, which
provides a description of your trim kit and its functions.
To avoid the risks that are always present when you use an
electric appliance, it is important that the refrigerator and
trim kit are installed correctly and that you read the safety
instructions carefully to avoid misuse and hazards.
We recommend that you keep this instruction booklet
for future reference and pass it on to any future owners.
After unpacking the trim kit, please check it is not
damaged. If in doubt, do not install the trim kit but contact
your local customer care centre.
The symbols you will see in this booklet have these
meanings:
CONTENTS
Trim kit contents (Installation) .....................................4
Trim kit contents (Single refrigerators) ........................5
Trim kit contents (Dual installation only) ......................6
Cabinetry dimensions ................................................8
Single and Dual Installations ....................................10
Joining the refrigerators (Dual installation only) .........11
Installation ...............................................................13
Warranty Information ...............................................19
CAUTION
Be careful when unpacking components. Do not
use sharp objects when removing packaging
material. This may scratch the surface of the trim
components. Take care not to drop the trim kit as
this may damage the components.
WARNING
This symbol indicates information concerning your
personal safety.
CAUTION
This symbol indicates information on how to avoid
damaging the trim kit.
IMPORTANT
This symbol indicates tips and information about
use and installation of the trim kit.
ENVIRONMENT
This symbol indicates tips and information about
economical and ecological use of the trim kit.
CONDITIONS OF USE
This trim kit is designed and intended to be used in normal
domestic applications only.
IMPORTANT INFORMATION THAT MAY IMPACT
YOUR MANUFACTURER’S WARRANTY
Adherence to the directions for use in this manual is
extremely important for health and safety. Failure to
strictly adhere to the requirements in this manual may
result in personal injury, property damage and affect
your ability to make a claim under the Electrolux
manufacturer’s warranty provided with your product.
Products must be used, installed and operated in
accordance with this manual. You may not be able
to claim on the Electrolux manufacturer’s warranty in
the event that your product fault is due to failure to
adhere this manual.
WARNING
Use extreme care when handling the metal trim
pieces as the corners are very sharp.
• Use only the parts that come with the trim kit for
installation
• Keep ventilation openings in the appliance enclosure
or the built-in structure clear of obstruction.
• Ensure that the floor and surrounding cupboards are
adequately protected from damage during unpacking
and throughout the installation process.
• Ensure that one (two for dual refrigerator installations)
accessible powerpoints are installed before installing
and connecting your appliances. These powerpoints
should also be readily accessible after fridge
installation is completed. Connect the mains plug to
the mains outlet only after the installation is complete.
• Do not use extension leads or power board or double
adapter under any circumstances as it may lead
to electric shock and / or fire. Seek assistance of a
licensed electrician if required.
• Due to size and weight of the refrigerators as well
as complexity of the task ensure that installation is
attempted with at least two able-bodied persons
IMPORTANT
• If your fridge model has an external water filter, plan
ahead to locate the filter where you can access it
without needing to remove the trim and fridges
• Unpack the connection kit and check for
completeness by referring to the components
section.
• The floor where the refrigerator is to be placed must
be level, otherwise you will not be able to install your
refrigerator properly.
4 electrolux.com.au
TRIM KIT CONTENTS
(SINGLE & DUAL REFRIGERATOR INSTALLATION)
FOR STEP 1 - INSTALLING THE LEVELLING SYSTEM (PAGE 9)
Item description quantity
1
Replacement foot base
with M4 threaded holes
ETK7000/D / ETK8000/D
2 2
ETK7080/D / ETK7070/D
/ ETK8080/D
2
3
5
6
7
Replacement hinge
base
LH/RH
Leveller assembly 2 4
Space leveller 8.4mm 6 12
Screw trilobular M5 x
26mm
Screw self tapping 6 x
30mm
RH x 1
LH x 1
8 16
2 4
RH x 1
LH x 1
8
9
Leg leveller 2 4
Clip trim bottom 2 4
NOTE:
Kits contain additional parts for installation of various models.
TRIM KIT CONTENTS
(SINGLE REFRIGERATORS)
Item description quantity
ETK7000/D ETK8000/D
1
Bracket top trim LH & RH RH x 1
5
RH x 1
2
3
4
5
(2H)
6
(8H)
7
(6H)
LH x 1
Top hinge cover LH & RH RH x 1
LH x 1
Top trim 7000
Top trim 8000
Insert top trim 1 1
Spacer 3mm top trim bracket 2 2
Screw trilobular
M5 x 10mm
Shoulder bolt
M5 x 10mm
(No. 4 allen key)
1
4 4
2 2
LH x 1
RH x 1
LH x 1
1
8
9
(5H)
10
11
12
(10H)
13
(4H)
Side trim
LH & RH
Screw counter sunk M4 2 2
Bottom trim 7000
Bottom trim 8000
Insert bottom trim 1 2
Screw 6G x 1/4” type AB pan head
phillips
Screw 8G x 1/2” type AB pan head
phillips
RH x 1
LH x 1
1
1 2
4 4
RH x 1
LH x 1
1
NOTE:
Kits contain additional parts for installation of various models.
6 electrolux.com.au
TRIM KIT CONTENTS
(DUAL REFRIGERATORS INSTALLATION ONLY)
FOR STEP 2 - JOINING THE REFRIGERATORS (PAGE 10)
Item description quantity
ETK7080/D / ETK7070/D / ETK8080/D
1
Top front bracket 1
2
(8H)
3
4
5
Screw trilobular
M5 x 13mm
Bottom rear bracket 1
Bottom front bracket assembly
M4 screws x 2
Centre trim assembly 1
6
1
6
Screw thread cutting #8 x 5/8 1
NOTE:
Kits contain additional parts for installation of various models.