ELECTROLUX ERES35800 User Manual
User manual
Benutzerinformation
Notice d'utilisation
Gebruiksaanwijzing
refrigerator
kühlgeräte
réfrigérateur
koelkast
ERES35800
We were thinking of you
when we made this product
Welcome to the world of Electrolux
Thank you for choosing a first class product from Electrolux, which hopefully will
provide you with lots of pleasure in the future. The Electrolux ambition is to offer
a wide variety of quality products that make your life more comfortable. You find
some examples on the cover in this manual. Please take a few minutes to study
this manual so that you can take advantage of the benefits of your new machine.
We promise that it will provide a superior User Experience delivering
Ease-of-Mind. Good luck!
3
The following symbols are used in this manual:
T
Important information concerning your personal safety and
information on how to avoid damaging the appliance
General information and tips
Environmental information
Scrapping old appliances
he symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the en vironment and human
health, which could otherwise be caused by inappropriate waste h an dling of
this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the
shop where you purchased the product.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
4
Safety instructions
Your new fridge may have other
functions compared to your previous
one.
Carefully read these instructions
learn how the appliance works
how to care for it. Keep the
booklet. It will come in handy if
later sell the cabinet or give it
somebody else.
These warnings are provided in the
interests of your safety. Ensure that
you understand them all before
installing or u sing the appliance. Your
safety is of paramount importance. If
you are unsure about any of the
meanings or warnings contact the
Customer Care Department.
to
and
instruction
you
to
For the User
· The refrigerator is intended for the
storage of foodstuffs and the
production of cold water, with or
without carbon dioxide, for normal
household use in accordance with
these instructions.
· If the gas cylinder is used for other
purposes than that intended or if it is
filled by an un au thorised person, all
guarantees automatically become null
andvoid.Inordertoensurereliable
functioning, only an Electrolux Cylinder
may be used.
· Do not keep explosive gases or
liquids in the refrigerator or freezer
compartment. They may explode and
cause inju ry and material damage.
· Do not let sharp objects come into
contact with the refrigerating system
on the back of and inside the cabinet.
If the refrigerating system is punctured,
the cabinet will be damaged and
foodstuff inside may spoil.
· Do not keep carbonised drinks or
bottles in the freezer compartment.
The glass bottles may break.
· The cabinet is heavy. The edges
and projecting parts of the cabinet
may be sharp. Be careful when moving
the cabinet and always use gloves.
Child Safety
· Pay attention so that small children
do not gain access to the operating
controls or the inside of the cabinet.
WARNING
Keep ventilation openings, in the
appliance enclosure or in the built-in
structure, clear of obstruction.
WARNING
Do not use mechanical devices or
other means to accelerate the
defrosting process, other than those
recommended by the manufacturer.
WARNING
Do not damage the refrigerant circuit.
WARNING
Do not use electrical appliance inside
the food storage compartments of the
appliance, unless they are of the type
recommended by the manufacturer.
WARNING
Connect to potable water supply only.
5
Contents
Welcome to the world of Electrolux 3.
Scrapping old cabinets 4...........
Safety instructions 5............
Contents 6......................
USE 7...........................
Control Panel 7...................
DISPLAY 7.......................
Functions Menu 8.................
Select /Switch off /Switch on 8......
Temperature regulation 8...........
Switching off 8....................
Ambient Temperature Function 8.....
Child Lock Function 9..............
Shopping Function 9...............
Eco mode Function 9..............
Drinks Chill Function 9.............
Use of the fridge compartment 9.....
Temperature regulation 9...........
Holiday Function "H" 10............
Door open acoustic alarm 10........
Control Panel (water dispenser) 10...
Cabinet interior 12.................
HINT and TIPS 13.................
Saving energy 13..................
Food Storage 13..................
Protect the environment 13.........
MAINTENANCE and CLEANING 14..
Removing the ventilation grille 14....
Cleaning 14......................
Servicing and clean in g the water
dispenser. 14..................
Service during operation 15.........
To change the lamp 15.............
Change of carbon filter 15..........
Defrosting the fridge 16.............
When the appliance is not in use 16..
SOMETHING NOT WORKING 16....
TECHNICAL SPECIFICATION 18....
Permissible water pressure (to ensure
reliable function). 18............
INSTALLATION 19.................
Unpacking 19.....................
Remove the transport supports 19...
Cleaning 19......................
Connecting the water hose. 19......
Electrical cord 20..................
Installation of carbon filter 20........
Installing the cabinet 20............
When the water system is started for the
first time 22...................
Electrical connection 23............
6
USE
Position and clean the cabinet as
explained in the section "Installation".
Check that the drain hose at the rear
of the cabinet discharges into the drip
tray.
Before inserting the power plug into the outlet and switching on the cabinet for
the first time, leave it standing upright for about 2 hours. Otherwise the
compressor may sustain damage. This time will allow the oil sufficient time to
return to the compressor .
Control Panel
AE
B
A - Appliance button ON/OFF
B - Temperature regulation button
C - Temperature and function indicator
DISPLAY
Excessive temperature alarm an d
Door open acoustic alarm
Indicator (if foreseen)
If on the temperature indicated is
the ambient temperature
PositiveTemperature indicator
Temperature indicator
7
C
D
D - Function button
E - Confirmation button
If on the Child Lock function is on
If on the Shopping function is on
If on the Drink Chill mode function
is on
If on the Eco Mode function is on
First switch on
After plugging the plug into the power
outlet, if the display is not illuminated,
press key (A), appliance on.
For a correct storage of the food select
the Eco mode function that guarantee
the following temperature is set:
+5°C in the fridge
· To select a differen t temperature
see "Temperature regulation".
Functions Menu
By activating the key D the fun ctions
menu is operating. Each function
could be confirmed by pressing button
E. If there is no confirmation after
some seconds the display will go out
from the menu and return in normal
condi-tion.
The following functions are indicated:
Ambient Temperature
Child Lock function
Shopping function
Eco Mode function
the buzzer).
Then the indicator shows the inside
compartment temperature again.
The newly selected-temperature must
be reached after 24 hours.
It is not necessary to set the temperature again after long periods of non
use as the temperature remains
stored.
Attention!
During the stability period by the first
starting the temperature displayed can
not correspond to the setting temperature. During this time it is possible
that the temperature displayed is
different than the setting temperature.
Switching off
The appliance is shut off by pressing
key (A) for more than 1 second. After
this, a countdown of the temperature
from -3 -2 -1 will be shown.
Drinks Chill function
Select /Switch off /Switch on
Temperature regulation
The temperature may be regulated by
pressing the key (B) to set the desired
temperature.
By pressing the key B the current temperature setting flashes on the indicator and by pressing the key B again it
is possible to change it.
Youconfirmthechoiceofthetemperature either by pressing the key E,
(you will hear the buzzer) or by waiting
for some seconds (you will not hear
Ambient Temperature Function
The ambient temperature function is
activated by pressing key D (several
times if necessary) until the corresponding icon appears
In this condition the selected temperature is the ambient temperature.
You must confirm the choice by
pressing key E within few seconds.
You will hear the buzzer an d the icon
remains lighted.
It is possible to de-activate the function
atanytimebypressingkeyDuntilthe
corres po nding icon will flash and then
key E.
.
8
Child Lock Function
The Child Lock function is activated by
pressing key D (several times if
necessar y) until the cor responding icon
appears
You must confirm the choice by pressing key E within few seconds. Y o u will
hear the buzzer and the icon remains
lighted.
In this condition any possible operation
through the keys does not cause any
change as long as this function is
activated.
It is possible to de-activate the function
atanytimebypressingkeyDuntilthe
corresponding icon flashes and then
key E.
.
Shopping Function
If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest you
activate the Shopping function to chill
the pr od ucts more rapidly and to avoid
warming the other food which is
already in the refriger at or.
The Shopping function is activated by
pressing key D (several times if necessary) until the corresponding icon
appears
choice by pressing key E within a few
seconds. You will hear the buzzer and
the icon will remain lit.
The Shopping function shuts off automatically after approximately 6 hours.
It is possible to de-activate the function
atanytimebypressingkeyDuntilthe
corresponding icon will flashes and
then key E.
. You must confirm the
Eco mode Function
The Eco mode function is activated by
pressing key D (several times if necessary) until the corresponding icon
appears
choice by pressing key E within few
seconds. You will hear the buzzer and
the icon remains lighted.
In this condition the chosen temperatures are automatically set (+ 5°C and
- 18°C), in the best conditions for
storing food.
It is possible to de-activate the function
at any time by changing the selected
temperature in one of the compartments.
. You must confirm the
Drinks Chill Function
The Quick Chill function permits the
rapid cooling of cans and bottles
taking forced cold air into them.
Put the drinks on the Quick Chill shelf
and open the air lever to the
maximum.
The Quick Chill function is activated by
pressing key D (several times if
necessary) until the corresponding icon
appears
When the cooling is finished de-activate the function by pressing key D
until the corresponding icon will flash,
then key E and reset the air lever to the
minimum .
.
Use of the fridge compartment
Temperature regulation
The temperature of this compartment
may be regulated between +2°C and
+8°C.
During normal functioning the indicator
shows the temperature inside the
fridge.
9
Attention!
Difference between the temperature
displayed and temperature setting is
normal. Especially when:
- a new setting has recently been
selected
- the door has been left open for a
long time
- warm food has been placed in the
compartment.
Holiday Function "H"
The holiday function sets the temperature at + 15°C.
This function allows you to keep the
refrigerator shut and empty during a
long holiday period ( e. g. the summer
holidays) without the formation of a
bad smell.
The Holiday Function H may be regulated by pressing the key B. By pressing the key B the current temperature
setting flashes on the indicator. Press
the key B again. When the letter H
appears on the display, confirm the
choice of the temperature or by
pressing the key E, (you will hear the
buzzer) or by waiting for some
seconds (you will not hear the buzzer).
Now the refrigerator is in the H oliday
function in the energy saving mode
and the indicator shows the letter H.
It is possible to de-activate the function
at any time by changing the selected
temperature in the compartment.
Attention!
The fridge compartment must be
empty whilst the Holiday function is on.
Door open acoustic alarm
An acoustic alarm will sound when the
door is left open for around 5 minutes .
The door open alarm conditions are
indicated by:
- flashing of the icon
- sounding of buzzer.
Press the key (E) to stop the acoustic
alarm.
When normal conditions are restor ed
(door closed):
- the acoustic alarm will stop.
;
Control Panel (water dispenser)
I
H
H. Yellow indicator lamp
Lights up when the locking function
has been activated.
I. Button for carbonated water.
-Usedforthechoiceofcarbonated
water.
M
L
N
- For the en gagement and
disengagement of the locking function.
J. Button for ordinary water.
- Used for the choice of ordinary water.
- Switches the background lighting on
and off.
K
J
10
- Switches off the indicator lamp for
water filter replacement.
K. Yellow indicator lamp
Lights up when the water filter must be
changed.
L. Water out-feed
Activated when a glass or something
similar is pressed u pwards against the
flap.
M. Flap
N. Lighting
The functions of the waterdispenser
The locking function:
The locking function is activated by the
production plant.
For temporary unlocking:
Keep the button (I) pressed in for about
three seconds until the yellow indicator
lamp (H) goes out. The locking
function is re-activated automatically
after about three seconds.
For permanent unlocking:
Keep the buttons (I) and (J) pressed in
at the same time for about three
seconds. The button (I) or (J) lights up
to indicate unlocking.
To activate the locking function:
Keep the buttons (I) and (J) pressed in
at the same time for about three
seconds. Activation is in dicated by the
yellow indicator lamp (H) lighting up.
Selecting and obtaining water:
Before obtaining water, selection is
carried out either by pressing the
button for carbonated water (I) or the
button for ordinary water (J). The
actual choice is indicated by the
button which lights up. The selection
of water can be changed while the
water is running.
Water is obtained by pressing a glass
or other container against the opening
(M). Stop the water flow by moving the
glass or container downwards away
from the opening (M). Any water that
drips or is spilled is collected in the
drip bowl below the water dispenser.
When the carbonated water is being
obtained, there is a slight afterflow
when the glass is removed. The drip
bowl can be detached and emptied
when n ecessary.
Lighting:
The water dispenser lighting (N) illuminates automatically when water is
obtained.
For continuous lighting:
1. Make sure that the water dispenser
is unlocked.
2. Then hold the button for ordinary
water (J) pressed in for about three
seconds until the illuminates.
The lighting then illuminates with about
50 % of its fu ll intensity.
To switch off the lighting:
1. Ensure that the water dispenser is
unlocked.
2. Then hold the button for ordinary
water (J) pressed in for about three
seconds until the lighting goes out.
11
Indicator lamp for the water filter:
The water dispenser is fitted with an
indicator lamp (K) which shows when it
is time to change the water filter. When
the indicator lamp stays on, then the
water filter has been utilised to about
80 % of its expected lifetime. In this
situation, it is recommended that you
buy a replacement filter. When the
indicator lamp starts flashing, the
water filter has been utilised to 100%
of its lifetime. Replace the filter without
delay.
After replacing the filter cartridge, see
the section "Service during operation".
The indicator lamp can be switched off
by holding the button for ordinary
water (J) pressed in for about three
seconds until the indicator lamp goes
out.
Carbon filter's function:
The built-in carbon filter means that
strong smelling groceries can be
placed near other groceries without
affecting their taste or aroma.
Certain shelves must be lifted up by
the rear edge to enable them to be
removed.
The lower door compartment and the
glass shelf above the vegetable drawer
must not be moved. They are fitted to
ensure air circulation inside the
cabinet.
Shelves with a raised edge should be
placed with the raised edge facing the
rear wall of the cabinet.
The vegetable drawer has a ventilation
edging to increase the circulation of air
and reduce the risk of condensation.
Cabinet interior
The shelves and door compartments
are removable and can easily be
re-arranged.
Quick chill shelf:
The lower Quick chill shelf can be
placed in one of the upper grooves. To
maintain the best performance the
shelf should be placed in the second
groove from the top.
12
Bottleholder
Thesideofthebottleholderis
moveable to enable a more flexible
placement of bottles in front of the
grid. During chilling of bottles the
article should be centrally placed in
front of the grid to obtain the best
chilling effect.
The bottle support can be pulled out
when ch illing larger bottles.
For a description of this functions start
and stop, see under heading Quick
Chill.
Dismantling of the bottleholder.
To loosen the holder from the shelf.
HINT and TIPS
Saving energy
· Pay careful attention to where the
cabinet is placed. See the section
"Installation". When installed correctly,
the cabinet will consume less energy.
· Try to avoid keeping the door open
for long periods, or opening the door
too frequently as warm air will enter the
cabinet, and cause the compressor to
switch on unnecessarily often.
· Ensure there are no obstructions
preventing the door from closing
properly.
· Thaw frozen food in the fridge. This
will ensure safer defrosting of foods
and reduce the work of the
refrigeration unit
· It is advisable to periodically clean the
refrigeration system at the back of the
appliance with a duster or vacuum
cleaner.
· Always leave warm food to cool
down to room temperature before
placing in the fridge.
· Make sure the door gasket is
complete and always clean.
Food Storage
· To obtain the best results from your
appliance, neither hot foods nor liquids
which may evaporate, should be
placed in the l arder compartment.
· Avoid buying frozen food if you can
not store it straight away. The use of
an in sulated container is advisable.
When you arrive home place the
frozen food in the freezer immediately.
· Ensure that food placed in the freezer
is dated and labelled and used in date
order to ensure that food is consumed
at its best. Remove suspect food from
you appliance and clean, refer to
cleaning and maintenance.
Protect the environment
· H an d over the cabinet packaging
and discarded fridges an d freezers to a
recycling station. Contact your local
council or Environmental Health office
for more information.
· Keep foodstuff in re-usable
containers. Cut down on disposable
material as much as possible.
· When cleaning the cabinet, use a
mild washing-up detergent.
· F ollow the advice in the section
"Saving energy"
· The door gasket and coolant used in
this cabinet will not harm the ozone
layer.
· All parts in the packaging can be
recycled.
· The cabinet h as been designed for
easy dismantling and subsequent
recycling.
13
MAINTENANCE and
CLEANING
Removing the ventilation grille
The ventilation grille can be removed,
e.g. to wash the grille.
Make sure the door is open when
removing the ventilation grille. Unsnap
the upper edge of the grille by pulling
outward/downward. Then pull the grille
straight out to completely remove it.
Cleaning
Clean the cabinet at regular intervals.
Internal Cleaning
Disconnect the appliance from
electricity supply.
Clean the inside and accessories with
warm water and bicarbonate of soda
(5ml to 0,5 litre water) Rinse and dry
thoroughly.
Regularly check the door seals and
wipe clean to ensure they are clean
and free from debris.
External Cleaning
Use water/neutral soap emulsion for
cleaning the surface of stainless steel,
anti-finger-print coated. Do NOT use
abrasive paste.
Wash the outer cabinet with warm
soapy water. Remove the ventilation
grille (see the section "Removing the
ventilation grille") and vacuum-clean
under the cabinet. Once or twice a
year dust the condenser (black grille)
and the compressor at the back of the
appliance, with a brush or vacuum
cleaner, as an accumulation of dust
will affect the performance of the
appliance and cause excessive
electricity consumption.
When moving the cabinet, lift it by the
front edge to avoid scratching the floor.
Servicing and cleaning the water
dispenser.
Never use cleaning agents with a
grinding or aggressive effect.
When n ecessary, clean the surfaces of
the dispenser and the water container
that are accessible from the outside,
using only a soft cloth and warm water.
The dispenser drip bowl can be
cleaned with a tepid solution of
washing up liquid.
If the system is not be used for a long
period turn off the water connection to
the refrigerator. A filter that has been in
service shall not be exposed to
temperatures below 0 °C as cracking
of the filter body may occur due to
freezing expansion.
If the filter still is to be preserved for
later reuse, suitable storage
temperature will be +5 °C.
14
When the refrigerator is to be used
again, rinse the system through
thoroughly by draining off at least three
litres (5 pints) of water.
If necessary , all systems containing
water must be sanitized by ordering
the necessary sanitizing kit through
Electrolux Service Force Centre (tel:
+44 8705 929 929) or through our
website www.electrolux.co.uk.
Service during operation
The water filter is replaced as follows:
Place a piece of kitchen tissue or a
dishcloth in the space under the filter.
Remove the filter by turning it
clockwise. A small amount of water will
run out. Dry off and fit the new filter.
See the section "When starting the
water system for the first time".
The water connection does not need
to be switched off when changing the
filter.
Replacement filters can be ordered
from Electrolux Service Force Centre.
See the section "Service and
replacement parts".
The gas cylinder is replaced as follows:
remove the gas cylinder and transfer
the adapter to the new cylinder .
The replacement gas cylinder is
obtained through your local dealer.
into a centred position and press un til
it snaps into place.
Use a halogen bulb of the same type,
maximum rating of 20 W.
Change of carbon filter
To maintain the best performance the
carbon filter should be changed once
a year with normal usage.
New carbon filters can be purchased
from your local dealer. The filter is
placed behind the grill and can be
reached by opening the cover. The
cover can be opened by turning the
cover outward. The carbon filter is
pulled out of its slot.
The new carbon filter is placed in the
existing slot - The filter should be
handled carefully so fragments do not
loosen from the surface.
1
To change the lamp
The light is switched on automatically
when the door is opened. Before
replacing the light bulb, disconnect the
power plug from the outlet.
Disassemble the lamp by using a
screwdriver in the recess on the lamp
insert. To prise it out of its location.
Assemble a new lamp by guiding it
15
Defrosting the fridge
The fridge is defrosted automatically
every time the compressor stops. Frost
formation can be prevented by:
· not putting warm foodstuff inside
the cabinet.
· avoiding frequently opening the
door or keeping it open too long.
Disconnect the appliance from
electricity supply.
Empty all foods and clean the
appliance, leaving the doors ajar to
prevent unpleasant smells.
If the cabinet is to be kept on, ask
somebody to check it once in a while
to prevent the food inside from spoiling
in case of a power failure.
SOMETHING NOT WORKING
Before contacting your local Service Force Centre check the following point:
Problem Possible cause / Remedy
When the appliance is not in use
”” is displayed in the
temperature display.
It is too cold inside the
refrigerator.
It is too warm inside the
refrigerator.
Water comes out on the floor. Place the drain hose at the back of the
The compressor operates
continuously.
An error has occurred in measuring the
temperature. Call your service representative.
(The cooling system will continue to keep
food products cold, but temperature
adjustment will n ot be possible.)
Set a warmer temperature.
Set a lower temperature.
Put food products in the right place inside the
refrigerator. See the chapter "Temperature
inside the refrigerator".
Distribute the food products to allow cold air
to circulate around them.
Make sure that the door is completely closed
and that the insulating strip is complete and
clean.
cabinet above the drain bowl. See the
chapter "Before using the cabinet the first
time".
Set a warmer temperature.
Make sure that the door is completely closed
and that the insulating strip is complete and
clean.
16
Sound level in cabinet is too
high.
The cabinet does not operate
at all. Cooling or in terior light
does not operate. No indicator
lamps light.
Not enough carbon dioxide in
the water
Too much carbon dioxide in
the water
No carbon dioxide. The gas cylinder is empty. Replace the gas
Water flow very low Remove and clean the strainer in the
The refrigerating system will always produce
some sounds. A pulsing sound is heard when
coolant is pumped inside the cooling pipes.
A ticking sound from the thermostat can be
heard when the compressor switches on and
off. The sound level varies depending on the
operation of the cabinet.
If you feel the sound level is incorrect:
Make sure the pipes at the back of the
cabinet do not touch each other. Carefully
bend them if they do.
If the cushion spacers (between the cabinet
wall and pipes) come loose, put them back in
place again.
Carefully follow the instructions in the chapter
"Installing the cabinet".
Power does not reach the cabinet. (Try
connecting another electrical device to the
power outlet.)
The cabinet is not switched on.
Thefusehasblown.
The power plug is not properly connected.
Incoming water pressure too low.
The carbon dioxide is running out. Replace
the gas cylinder.
Dilute with ordinary water. (See the section
"The water dispenser functions")
cylinder.
Drain off a large amount of carbonated water
(about 1 litre)
Incoming water pressure too low.
connecting valve.
Sediment in the water. Replace the filter or
install a pre-filter.
17
Only gas comes out when
opening
The water dispenser lamp an d
the yellow indicator lamp
flashes
Indicator lamp for the water
filter flashes.
The indicator lamp stays on
and shows yellow
Delivery is interrupted after a
short time
If after above checks there is still a fault call your local Service Force Centre.
In-guarantee customers should ensure that the above checks have been made
as the engineer will make a charge if the fault is not a mechanical or electrical
breakdown.
Please note that proof of purchase is required for in-guarantee service calls.
Incoming water pressure too high. Install a
pressure- limiting device.
Capacity temporarily exceeded. Wait for ten
minutes.
Leakage at the water connection. Internal
leakage, please contact your local Electrolux
Service Force Centre.
The filter has been totally utilised. Replace the
filter.
80 % of the filter capacity expended. Buy a
new filter.
The maximum time of two minutes is
attained. Continue with delivery.
TECHNICAL SPECIFICATION
Model ERES35800W/ERES35800X
Net capacity Refrigerator l 324
Energy consumption kWh/y 175
Dimension mm
Height 1800
Width 595
Depth 650
Permissible water pressure (to ensure reliable function).
The total flow in the system can vary, depending on local water conditions
and/or water pressure.
Lowest permissible water
pressure. 2,5 bar (250kPa)
Highest permissible water
pressure. 5 bar (500kPa)
Consult your installer if water pressure is
less than 2,5 bar.
If water pressure exceeds 5 bar, than a
reduction valve must be fitted (available
from your specialist shop).
18
Do not connect the appliance in spaces where ambient temperature can
decrease to below freezing.
The appliance may only be connected to drinking water supplies.
The appliance may only be connected to cold water supplies.
INSTALLATION
Unpacking
Unpack the cabinet and check that it
is in good condition and free of any
transport damage. Notify the dealer
immediately of any damage. Hand the
packaging over for recycling. F or more
information, contact your local council
or the dealer.
Do not allow children to play with the
packaging. The plastic film can cause
suffocation.
Cleaning
Remove the transport supports
Removethetapeandthetransport
supports from
· the door sides
· inside the door hinges
·theshelves
Remove the transport support on the
glass shelf by pushing the support
forwardalongtheedgeoftheshelf
until it stops. Take hold of the rear
edge of the glass shelf and pull the
shelf and transport support forward
until the shelf tilts and the transport
support can be removed. Some
models are fitted with a silencing pad
under the cabinet. Do not remove this
pad.
Wash the inside of the cabinet using
lukewarm water, a mild washing-up
detergentandasoftcloth.
Connecting the water hose.
The water coupling is connected to a
water tap with an external 3/4 inch
thread.
This work is to be carried out by a
skilled plumbing installation technician.
The refrigerator is to be connected
with a shut-off cock. There are different
type-approved taps and tap
assemblies on the market.
The water hose must not be cracked,
squeezed or be in tight bends.
19
Before the refrigerator is taken into use
in its final location, ensure that the
water connection h as been correctly
carried out, that there is no leakage at
the connection to the water tap, and
that the four spacers are properly in
position, see the illustration.
We recommend that the appliance is
placed on a " run - off" mat intended for
refrigerators and freezers, which
makes it easier to detect possible
leakage.
it in order to avoid shock hazard for the
user.
Installation of carbon filter
On delivery the carbon filter is placed
in a plastic bag to secure the length of
the carbon filter life. The filter should
be placed behind the grill before the
cabinet is turned on.
The cover can be opened by tur n in g
the cover outward. The carbon filter is
then mounted in the slot found in the
back, see the illustration.
The filter should be handled carefully
so fragments do not loosen from the
surface.
1
Electrical cord
Do not remove the power cord by
pulling on its lead, particulary when the
product is being pulled out of its niche.
· Damage to the cord may cause a
short-circuit, fire and/or electric shock.
· In the event of damage to the
appliance's main cable, only an
authorised service company
recommended by the manufacturer or
a similarly qualified person may adjust
Installing the cabinet
When two appliances are placed
beside each other, the spacers
enclosed in the plastic wrapping
should be glued between the
appliances. As shown in the
illustration.
20
Make sure that the power plug is not
squashed or damaged by the back of
the product.
· A damaged power plug may
overheat and cause a fire.
Do not place heavy articles or the
product itself on the power cord.
· there is a risk of a short circuit and
fire.
If the power plug socket is loose, do not
insert the power plug.
· there is a risk of electric shock or fire.
the cabinet and that the air channels
below and behind the cabinet are not
blocked. The ventilation space above
the cabinet must be at least 4 cm.
The ventilation space can either be
a) directly above the cabinet, or
b) behind and above the top cupboard.
In this case, the space behind the
cupboard must be at least 50 mm deep.
a)
b)
50mm
Cabinet is placed at a location where
the ambient temperature corresponds
to the climate classification*, for which
the appliance is designed.
* See on the rating plate on the inside
of the appliance.
The following table shows which
ambient temperature is correct for
each climate classification.
To obtain the best performance from the
cabinet, ensure:
· the cabinet is placed in a dry, cool
place and is not exposed to direct
sunlight.
· the cabinet is not placed close to a
source of heat, e.g. a cooker or
dishwasher.
· the cabinet is level. The cabinet
should not lean against any wall. If
necessary adjust the feet using the
adjustment spanner supplied.
· there is good air circulation around
21
Climate
classifi-
for an ambient
temperature of
cation
SN
N
ST
T
+10°C to +32°C
+16°C to +32°C
+18°C to +38°C
+18°C to +43°C
Check that the drain hose at the rear
of the cabinet discharges into the drip
tray.
If the cabinet is placed in a corner and
the side with the hinges facing the
wall, the distance between the wall
and the cabinet must be at least 230
mm to allow the door to open enough
so that the shelves can be removed.
The power plug must be accessible
after installation of the cabinet.
When the water system is started for
the first time.
The following should be carried out
when the appliance is correctly
connected to the water supply in the
building:
Open the tap on the water connection
and start up the refrigerator. The water
system main valve opens and the
system starts to fill up. Wait for five
minutes.
Unpack the filter provided and connect
it as follows:
- Remove the filter protective cap an d
insert the filter connector into the filter
seat and turn as shown in the
illustration (2) until the filter en gages
and the projection on the filter
cartridge is opposite the mark on the
plastic cover. See also the illustration
and the instructions on the inside of
the service hatch.
- Unlock the water dispenser. See the
section "The water dispenser
functions" Select carbonated water
and drain off about 1.5 litres (2.5 pints)
of water. There may be some air to
start with.
Connect the gas cylinder provided as
follows:
- Take out the gas cylinder from plastic
bag and screw the gas cylinder into
the adapter (3) for this purpose, which
is located in the cabinet, doing this by
hand without tools.
3
- Place the gas cylinder with adapter in
the valve and ensure that the valve
bracket hooks are under the
counterhold on the adapter (5). Then
turn up the bracket lever (6) in one
continuous movement. See the
illustration and the instructions on the
inside of the service h atch.
4
1
2
5
6
22
- Unlock the water dispenser and drain
off a further 1.5 litres (2.5 pints) of
water or until there are signs that the
carbonated water in the water
dispenser is starting to run.
- The system is now ready for use. In
order to obtain the best possible
performance from the refrigerator, wait
until the set temperature is reached. A
low temperature provides more carbon
dioxide, a high temperature less
carbon dioxide.
Re-hanging the door.
It is not possible to re-hang the door.
The water supply goes through the
hinge to the water dispenser. Contact
your dealer for more information.
Electrical connection
Connect the cabinet to a grounded
electrical outlet.
Voltage: 230 V.
Fuse: 10 A.
Refer to the rating plate on the left
inside the cabinet.
23
Willkommen bei Electrolux!
Wir möchten uns bedanken, dass Sie sich für ein erstklassiges Produkt von
Electrolux entschieden haben, welches Ihnen sicherlich viel Freude bereiten wird.
Es ist unser Bestreben, eine breite Vielfalt von Qualitätsprodukten anzubieten,
die helfen, Ihr Leben etwas komfortabler zu machen. Sie finden einige Beispiele
auf der vorletzten Seite in diesem Heft. Bitte n eh men Sie sich einige Minuten,
diese Benutzerinformation zu lesen, um voll von den Vorteilen Ihres neuen
Gerätes profitieren zu können. Wir sind sicher, dass wird Ihr Leben zukünftig
etwas leichter machen.
Wir wün schen eine gute Zeit.
24
g
Einige Passagen in der Gebrauschsanweisung sind besonders gekennzeichnet.
Diese Kennzeichnungen haben folgende Bedeutung.
Mit dem Warndreieck und/oder durch Signalwörter (Warnung!, Vorsicht!,
Achtung!) sind Hinweise hervorgehoben, die für Ihre Sicherheit oder für
die Funktionsfähigkeit des Gerätes wichtig sind. Bitte unbedingt
beachten.
Nach diesem Zeichen erhalten Sie ergänzende Informationen zur
Bedienung und praktischen Anwendung des Gerätes
Mit der Blume sind Tips und Hinweise zum wirtschaftlichen und
umweltschonenden Einsatz des Gerätes
ekennzeichnet
Entsorgen alter Geräte
Das Symbol auf dem Produkt oder seiner Verpackung weist darauf
hin, dass dieses Produkt nicht als normaler Haushaltsabfall zu
behandeln ist, sondern an einem Sammelpunkt für das Recycling von
elektrischen und elektronischen Geräten abgegeben werden muss. Durch
Ihren Beitrag zum korrekten Entsorgen dieses Produkts schützen Sie die
Umwelt und die Gesundheit Ihrer Mitmenschen. Umwelt und Gesundheit
werden durch falsches Entsorgen gefährdet. Weitere Informationen ü ber
das Recycling dieses Produkts erhalten Sie von Ihrem Rathaus, Ihrer
Müllabfuhr oder dem Geschäft, in dem Sie das Produkt gekauft haben.
Das Gerät darf von Personen (einschließlich Kindern), deren physische,
sensorische Fähigkeiten und deren Mangel an Erfahrung und Kenntnissen einen
sicheren Gebrauch des Gerätes ausschließen nur u n ter Aufsicht oder nach
ausreichender Einweisung durch eine verantwortungsbewußte Person benutzt
werden, die sicherstellt, dass sie sich der Gefahren des Gebrauchs bewusst
sind.
25
WICHTIGE HINWEISE ZUR SICHERHEIT
Die Funktionen Ihres neuen
Tiefkühlgerätes unterscheiden sich
möglicherweise von denen Ihres
bisherigen Gerätes.
Bitte lesen Sie diese
Gebrauchsanleitung vor der
Inbetriebnahme des Gerätes sorgfältig
durch, um eine sachgerechte
Bedienung und Pflege sicherzustellen.
Verwahren Sie die Gebrauchsanleitung
anschließend an einem sicheren Ort.
Sie können dann später im Bedarfsfall
jederzeit darauf zurückgreifen oder die
Gebrauchsanleitung im Falle eines
Besitzerwechsels weitergeben.
Anwendungsbereich
· Der Schrank ist vorgesehen für die
Aufbewahrung von Lebensmitteln u n d
die Erzeugung von kaltem asser mit
oder ohne Kohlensäure für den
normalen Haushaltsgebrauch gemäß
dieser Bedienungsanleitung.
· Die Verwendung des Gaszylinders
für einen anderen Zweck als den
vorgesehenen, sowie das Nachfüllen
durch Unbefugte führt automatisch
dazu, dass jede Gewährleistung
entfällt. Um die Funktion zu
gewährleisten dürfen nur Zylinder von
Electrolux verwendet werden.
· Bewahren Sie niemals explosive
Gase oder Flüssigkeiten im Kühl- oder
Gefrierraum auf. Sie könnten
explodieren und sowohl Personen- als
auch Sachschäden verursachen.
· Lassen Sie keine scharfen
Gegenstände mit dem Kühlsystem auf
der Rückseite und im inneren des
Gerätes in Berührung kommen.
Löcher im Kühlsystem führen sowohl
zu einer Beschädigung des Gerätes
als auch zu einem Verderben der im
Gerät gelagerten Lebensmittel.
· Das Gerät ist schwer. Die Kanten
sowie hervorstehende Teile könnten
scharf sein. Transportieren Sie das
Gerät mit äußerster Vorsicht und
tragen Sie beim Transport
Handschuhe.
Kinder
· Achten Sie unbedingt darauf, daß
Kleinkinder weder an den
Bedienelementen spielen noch in das
Gerät hineinklettern.
WARNUNG!
Achten Sie darauf, dass die
Belüftungsöffnungen im Gehäuse um
das Gerät oder im Einbauschrank nicht
blockiert sind.
WARNUNG!
Versuchen Sie nicht, den
Abtauprozess durch andere als vom
Hersteller empfohlene mechanische
oder sonstige Hilfsmittel zu
beschleunigen.
WARNUNG!
Achten Sie darauf, den Kühlkreislauf
nicht zu beschädigen.
WARNUNG!
Betreiben Sie in den
Lebensmittelfächern des Geräts keine
anderen als die vom Hersteller
empfohlenen Elektrogeräte.
WARNUNG!
Verbinden Sie das Gerät ausschließlich
mit einer Trinkwasserzuleitung.
26
Inhaltsverzeichnis
Entsorgen alter Geräte 25...........
WICHTIGE HINWEISE ZUR
SICHERHEIT 26...............
Inhaltsverzeichnis 27...............
DISPLAY 28......................
Beschreibung 28..................
Vor der ersten Inbetriebnahme des
Gerätes 28....................
Bedienelemente 28................
Erste Betrieb 29...................
Funktionen Menu 29...............
Wählen/Abschlalten/Einschalten 29..
Temperatureinstellung 29...........
Gerät abschalten 29...............
Funktion Raumtemperatur 30.......
Funktion Child Lock 30.............
Funktion Shopping 30..............
Funktion Eco Mode 30.............
Funktion Drinks Chill 31............
Gebrauch des Kühlschrankes 31....
Temperatureinstellung 31...........
Funktion Holiday "H" 31............
Hörbarer Alarm bei offener Tür 32....
Bedienelemente (Wasserspender) 32.
Innenraum 34.....................
Demontage des Flaschenhalters 34..
PRAKTISCHE TIPS 35.............
Energiespartips 35.................
Das Gerät und die Umwelt 35.......
Umweltschutz 35..................
PFLEGE UND WARTUNG 35........
Entfernen des Lüftungsgitters 35.....
Reinigung 35.....................
Pflege und Reinigung des
Wasserspenders 36............
Wartung während des Betriebs 37...
Abtauen - Kühlraum 37.............
Wechsel des Kohlefilters 37.........
Wechseln der Lampe an der
Schalttafel. 37.................
Wenn Sie das Gerät nicht benutzen 38
WENN DAS GERÄT NICHT
FUNKTIONIRT 38..............
TECHNISCHE ANGABEN 40........
INSTALLATION 41.................
Auspacken 41....................
Reinigung 41.....................
Entfernen Sie die
Transportsicherungen 41........
Anschluss des Wasserschlauchs 41..
Anbringung des Kohlefilters 42......
Geräteanschlußkabel 42............
Aufstellen des Gerätes 43...........
Wenn das Wassersystem zum
ersten Mal gestartet wird 44.....
Elektrischer Anschluß 45...........
27
Beschreibung
A
Vor der ersten Inbetriebnahme des
Gerätes
Beziehen Sie sich bezüglich der
Aufstellung und Reinigung des Gerätes
auf das Kapitel "Aufstellen".
Kontrollieren Sie vor dem Aufstellen
des Gerätes, ob der Ablaufschlauch
auf der Rückseite in die Auffangschale
mündet.
Lassen Sie das Gerät vor Anschluß an das Netz und vor der ersten
Inbetriebnahme ca. 4 Stunden lang stehen, bevor es in Betrieb genommen
werden darf. Andernfalls könnte der Kompressor beschädigt werden. Währ end
der Ruhephase kann das Öl zum Kompresso r zurückflie ßen.
Bedienelemente
AE
B
A-EIN/AUSTaste
B - Taste der Temperaturregelung
C - Temperatur-und Funktionsanzeige
DISPLAY
larm Ubertemperatur und
Alarmanzeige geöffnete Tür (wenn
vorgesehen)
Falls eingeschaltet, ist die
angezeigte Temperatur, die
Raumtemperatur
PositiveTemperaturanzeige
C
D
D - Taste zur Aktivierung der
Funktionen
E - Bestätigungstaste
Temperaturanzeige
Falls eingeschaltet, wird die aktive
Funktion Child Lock angezeigt
Falls eingeschaltet, wird
angezeigt, dass die Funktion
Shopping aktiv ist
28
Loading...