Electrolux ERCE9025BK, ERCE9025SA, ERCE9025BA User Manual
User manual Canopy rangehood ERCE9025BK
ERCE9025SA
ERCE9025BA
2
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance.
You’ve chosen a product that brings with it decades
of professional experience and innovation. Ingenious
and stylish, it has been designed with you in mind.
So whenever you use it, you can be safe in the
knowledge that you’ll get great results every time.
Welcome to Electrolux.
BEFORE USING YOUR APPLIANCE
Before you use the rangehood, we recommend that you
read through the whole user manual which provides
the description of the rangehood and its functions. To
avoid the risks that are always present when you use an
electrical appliance, it is important that the rangehood is
installed correctly and that you read the safety instructions
carefully to avoid misuse and hazards.
For future reference, please store this booklet in a
safe place.
This rangehood is a domestic appliance which has been
manufactured and tested to comply with Australian and
New Zealand Standard AS/NZS 60335.2.31.
CONDITIONS OF USE
This appliance is intended to be used in household and
similar applications such as:
•
Staff kitchen areas in shops, offices and
other working environments
• Farm houses
•
By clients in hotels, motels and other residential
type environments
• Bed and breakfast type environments.
CONTENTS
3 Important safety instructions
4 Product description
5 Dimensions
6 Rangehood installation
9 Using the rangehood
9 Maintenance and cleaning
9 Changing the halogen lamps
10 Optional ducting accessories
11 Warranty
LEGEND
The symbols you will see in this booklet have
these meanings:
WARNING!
This symbol indicates information concerning your
personal safety
CAUTION!
This symbol indicates information on how to avoid
damaging the rangehood
IMPORTANT!
This symbol indicates tips and information about
use of the rangehood
ENVIRONMENT!
This symbol indicates tips and information
about economical and ecological use of the
rangehood.
BEFORE YOU CALL
Please ensure you read the instruction manual fully before
you call for service, or a full service fee could be applicable.
RECORD MODEL AND SERIAL
NUMBER HERE:
Model:
Serial No:
IMPORTANT SAFETY INSTRUCTIONS
3
This manual explains the proper use of your new Electrolux
rangehood. Please read this manual carefully before using
the product. This manual should be kept in a safe place for
handy reference.
This rangehood is a domestic appliance which has
been manufactured and tested to comply with Australian
and New Zealand Standard AS/NZS 60335.2.31.
CAUTION!
Meanings of symbols used in this manual are shown below:
This symbol indicates never to do this
This symbol indicates always do this
CAUTION!
Follow these instructions carefully to avoid an electric
shock or fire.
Young children should be supervised to ensure they
do not play with the rangehood.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by a
person responsible for their safety.
Ensure the rangehood is switched off before carrying
out maintenance, to avoid any possibility of electric
shock.
Never carry out flambé cooking under the rangehood.
This rangehood is not recommended for barbecues.
This rangehood cannot be installed for external use.
Grease filters must be removed every four weeks
(maximum) for cleaning to reduce the risk of fire.
The exhaust from the rangehood must not be
discharged into any heating flue, which may carry
combustion products from other sources. (Fig. 1)
Exhaust air must not be discharged into a wall cavity,
unless the cavity is designed for the purpose.
There must be adequate ventilation of the room when
the rangehood is used at the same time as appliances
burning gas or other fuels.
Always cover lit gas burners with pots or pans when
rangehood is in use.
Always switch off gas burners before you remove pots
or pans.
Do not leave lit gas burners exposed due to the risk
of fire. (Fig. 2)
Electrical connection
Check that the mains voltage matches with the voltage
on the data plate inside the rangehood. Check that the
installation complies with standards of local building, gas
and electrical authorities. Before connecting to the mains
supply ensure that the mains voltage corresponds to the
voltage on the rating plate inside the rangehood.
If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent or similarly qualified
person in order to avoid a hazard.
Safety warnings – for the installer
When installing the rangehood, make sure you
adhere to the minimum and maximum distances from
the rangehood base to the hob surface (as shown on
page 6).
Exhaust flue installation:
The following rules must be strictly followed to obtain
optimal air extraction.
• Keep exhaust flue short and straight.
• Donotreducethesizeorrestrictexhaustue.
• Keepbendsintheexhaustuetoaminimum.
• Whenusingexibleuealwaysinstallductwithhelix
pulled taut to minimise pressure loss.
• Failuretoobservethesebasicinstructionswill
drastically reduce the performance and increase the
noise levels of the rangehood.
Exhaust air must not be discharged into a wall cavity,
unless the cavity is designed for that purpose.
The exhaust from the rangehood must not be discharged
into any heating flue, which may carry combustion
products from other sources.
NOTE: Some installations may require the telescopic
exhaust cover to be cut to length. Cut with sharp tin
snips or a fine-tooth hack saw blade, taking care not to
distort or dent the exhaust cover.
Fig. 1 Fig. 2
4
PRODUCT DESCRIPTION
1
2
3
4
5
6
7
Additional items required for installation
body and anti-tilt points.
mounting brackets to the wall.
1
Screws x 4
2
eufl cipocseleT
cover set
3
3
revoc eufl reppU
mounting bracket
4
revoc eufl rewoL
mounting bracket
5
Flue transition duct
6
naf dna ydob niaM
housing assembly
7
Grease filters
Technical specification
Power supply: 220-240 Volts 50Hz.
Connects to 7.5A powerpoint.
Lights: 2 x 40 watt, 240 Volt halogen
Flue pipe.
DIMENSIONS
290mm
320mm
235mm
550mm
1090mm
(maximum)
ø150mm
900mm
55mm
500mm
NOTE: The fan housing e transition duct is 150mm in
diameter. (See page 10 for optional ducting accessories).
Loading...