Use a Care Guide
French Door Bottom Freezer/Refrigerator
Guia de Uso y Cuidado
Refrigerador con congelador inferior de puerta doble
Guide d'utilisation et d'entretien
R4frig4rateur i_ portes fran_aisesiCor_g41a_eur en bas
241940002 March 2(i)09
2 Finding information
P ease read and save this 9uide
Thank you for choosing Electrolux, our new premium
brand in home appliances.This Use & Care Guide is
part of our commitment to customer satisfaction and
product quality throughout the service life of your new
appliance.
Keep a record for quick
Purchase date
Etectrolux model number
Electrolux serial number
NOTE
Registering your product with Electrolux enhances
our ability to serve you. You can register online at
www.electroluxappliances.com or by sending your
Product Registration Card in the mail.
Table of contents
FindingInformation .............................................. 2
Surely............................................................... 3
Feature Overview ................................................. 5
installation......................................................... G
RemovingtheBoors ............................................ 10
Installing Boor Handles........................................ 12
Connectingthe Water Supply .................................. 13
Controls........................................................... 14
AutomaticIce & Water MakertDispenser.................... 19
Storage Features ................................................ 21
Storing Foodand Saving Energy.............................. 26
Normal OperatingSounds & Sights .......................... 27
ChangingtheWater andAir Filters........................... 28
CareandCleaning............................................... 30
For toll-free telephone support in the U.S. and Canada:
1-877-4ELECTROLUX (1-877-435-3287)
For online support and product information visit http:/i
www.electroluxappliances.com
Jnsta mation Checklist
Doors
[] Handles are secure and tight
rq Door seals completely to cabinet on all sides
[] Freezer door is level across the top
Leveling
[] Refrigerator is level, side-to-side and tilted 1/4"
(Cmm) front-to-back
13 Toe grille is properly attached to refrigerator
[] Cabinet is setting solid on all corners
Electrical Power
83 House power turned on
[] Refrigerator plugged in
Solutions to CommonProblems............................... 33
Warranty.......................................................... 37
Ice Maker
_3 House water supply connected to refrigerator
C3 No water leaks present at all connections -
recheck in 24 hours
[] Ice maker is turned ON
[] Ice & water dispenser operates correctly
[] Front filter must be flush with filter housing
(select models)
Final Checks
[] Shipping material removed
[] Fresh food and freezer temperatures set
[] Crisper humidity controls set
[] Registration card sent in
Important safety instructions
Safety 3
Safety Precautions
Do not attempt to install or operate your unit until
you have read the safety precautions in this manual.
Safety items throughout this manual are labeled with a
Danger, Warning, or Caution based on the risk type.
Definitions
_This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
DANGER
DANGER indicates an imminently hazardous
situation which, if not avoided, will result in death
or serious injury.
WARNING
WARNING indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
IMPORTANT
Indicates installation, operation, or maintenance
information which is important but not hazard-related.
General Safety
WARNING
Please read all safety instructions before using
your new refrigerator.
,, Do not store or use gasoline or other flammable
liquids near this or any other appliance.
Read product labels for 'warnings regarding
flammability and other hazards.
• Do not operate the refrigerator in the presence of
explosive fumes.
,, Avoid contact with any moving parts of the
automatic ice maker.
Remove all staples from the carton to avoid
injury. Staples can also damage finishes if
they come in contact with other appliances or
furniture.
Child Safety
Packing Materials:
o
Packing cartons covered with rugs, bedspreads,
plastic sheets, or stretch wrap may become
airtight chambers and can quickly cause
suffocation.
Destroy or recycle the product's carton, plastic
bags, and any other exterior wrapping material
immediately after the refrigerator is unpacked.
Children should never play with these items.
Child Entrapment and Suffocation:
. These problems are not limited to the past.
Whether junked, abandoned, or temporarily
stored (even for a few hours), unattended
refrigerators and freezers are dangerous. Please
take the precautions listed below.
Proper Disposal of Refrigerators/Freezers
We strongly encourage responsible appliance recycling/
disposal methods. Check with your utility,company or
visit www.recyctemyoldfridge.com for more information
on recycling your old refrigerator.
Before you recycle or dispose of your old refrigerator/
freezer:
o
Remove the doors.
o
Leave the shelves
and baskets in place
so children may not
easily climb inside.
Have refrigerant
and compressor
oil removed by a
qualified service
technician.
4 Safety
Emectdcal information
WARNING
You must follow these guidelines to ensure
that your refrigerator's safety mechanisms are
operating correctly,
. The refrigerator must be plugged into its own
dedicated 115 Volt, 60 Hz, AC-only non=GFCl
electric outlet. The power cord of the appliance
is equipped with a three-prong grounding plug for
your protection against electrical shock hazards.
It must be plugged directly into a properly
grounded three-prong receptacle. The receptacle
must be installed in accordance with local codes
and ordinances. Consult a qualified electrician.
Do not use an extension cord or adapter plug.
o If the power cord is damaged, it should be
replaced by the manufacturer, service technician,
or a qualified person.
• Never unplug the refrigerator by pulling on the
power cord. Always grip the plug firmly and
pull straight out from the receptacle to prevent
damaging the power cord.
• To avoid electrical shock, unplug the refrigerator
before cleaning and before replacing a light bulb
or LED light.
o Performance may be affected if the voltage varies
by 10% or more. Operating the refrigerator with
insufficient power can damage the compressor.
Such damage is not covered under your warranty.
• Do not plug the unit into an outlet controlled by a
walt switch or pull cord to prevent the refrigerator
from being turned off accidentally.
Grounding
wall reeeptac e
| IMPORTANT
To turn off power to your refrigerator, unplug the
power cord from the wall outlet.
Feature Overview 5
Understanding features and terms
Your Electrolux refrigerator is designed for optimal convenience and storage flexibility. The illustration below is
provided to assist you with familiarizing yourself with product features and terminology,
NOTE
Air
Filter
SpilISafeTM
Shelves
Crisper
Special Items
Rack
(inside PTD)
(select models)
LED Light
(select models)
Water
Filter
Adjustable
Hinges
(select models)
Features may vary according to model,
Incandescent Light (select models)
Ice Bin
Flipper Guide LED Light (select models)
Ice Maker Dairy
Model is shown without freezer drawer cover.
Flipper
_lien
Shelves
Crisper
Drawer
Tilt Can
Bin
)TMDrawer (PTD)
(select models)
or Dell Drawer
(with humidity slides)
Freezer Baskets
(top basket select
models only)
I1:_'b,
WireTilt-Out Shelf
(inside freezer drawer)
_---- Toe Grille
6
installation
Required Tools
You will need the following tools:
Components Provided:
Top Hi_ _ToP Ht_
CoverFro_
Screw _ _ 8c_
This Use & Care Guide provides general installation
and operating instructionsfor your model. We
recommend using a service or kitchen contracting
professional to install your refrigerator. Use the
refrigerator only as instructed in this Use & Care
Guide. Before starting the refrigerator, follow these
important first steps.
,, Choose a place that is near a grounded, non-
GFCI, electrical outlet. Do Not use an extension
cord or an adapter plug.
* If possible, place the refrigerator out of direct
sunlight and away from the range, dishwasher, or
other heat sources.
,, The refrigerator must be installed on a floor that
is level and strong enough to support a fully
loaded refrigerator.
,, Consider water supply availability for models
equipped with an automatic ice maker.
ToolsNecessary:
CAUTION
DO NOT install the refrigerator where the
temperature will drop below 55°F (13°O) or rise
above 110°F (43°C). The compressor will not be
able to maintain proper temperatures inside the
refrigerator,
DO NOT block the toe grille on the lower front
of your refrigerator. Sufficient air circulation
is essential for the proper operation of your
refrigerator.
&!8" Fb¢_::l
Wrench
Installation
* Allow the following clearances for ease of
installation, proper air circulation, and plumbing
and electrical connections:
Sides & Top ¾ inch (9.5 mm)
Back 1 inch (25.4 mm)
NOTE
If your refrigerator is placed with the door hinge
against a wall, you may have to allow additional space
so the door can be opened wider.
Door opening
NOTE
The refrigerator doors are designed to shut by
themselves within a 20 degree opening.
Your refrigerator should be positioned to aitow easy
access to a counter when removing food. For best
use of refrigerator drawers and freezer baskets, the
refrigerator should be in a position where both can be
fully opened.
Guidelines for fina[ positioning
of your refrigerator
* All four corners of the cabinet must rest firmly on
the floor.
e
The cabinet should be level at the front and rear.
o
The sides should tilt ¼ inch (6 mm) from front
to back (to ensure that doors close and seal
properly).
Doors should align with each other and be level.
Most of these conditions can be met by raising or
lowering the adjustable front rollers.
installation 7'
To level the cabinet using the front rollers (select
models):
1 Slightly open freezer drawer. Lift the left side
of the toe grille and gently pull forward (see
illustration).
2 Lift the right side of the toe grille and gently pull
forward to remove toe grille (see illustration).
34Close the drawer and use a flat-blade screwdriver
or %-inch socket wrench to raise or lower the
front rollers,
Ensure both doors are bind-free with their seals
touching the cabinet on all four sides.
5 After unit is leveled, lower anti-tip leg until it
contacts the floor,
NOTE
The anti-tip leg must be in contact with the floor to
keep the refrigerator stable. DO NOT use the anti-tip
leg to level the refrigerator.
6 Replace the toe grille by fitting it into place,
installation
To adjust the door stop:
Door stop is adjustable between 85 to 145 degrees.
NOTE
View shown is looking up at the bottom of the
refrigerator door,
Adjustable Door Stop
1 Open door to provide access to set screw.
2 Loosen set screw.
3 Adjust door to desired location,
5 Re-tighten set screw.
SetScrew
e
Re-tighten Set Screw
6 Ensure door stops in desired location before
resuming normal use.
To level the doors using the adjustable lower hinge
(select models):
1 Remove all food items from door bins on door
being adjusted.
2 Open doors to 90 degrees.
3 Loosen or remove set screw.
AdjustingDoor
Rotate door stop until it makes contact with the
lower hinge.
Bottom of Door
Loosen/RemoveSet Screw
installation 9
Lift the door while adjusting the washer. To
raise the door, rotate washer clockwise (when
viewed from the bottom). To lower door, rotate
washer counter-clockwise (when viewed from the
bottom).
Raising/Lowering Door
Re-tighten the set screw, ensuring it is between
the spokes of the set washer. Set screw will not
be tight, just insert until it is flush with the hinge.
To adjust the flipper mullion:
1 Loosen the set screw located on the flipper
mullion hinge.
SeE
8crew
Adjusting Flipper Mullion Screw
2
Adjust flipper mullion height. For proper
connection with the flipper mullion guide, there
should be a separation about the thickness of a
coin (0.060 inches, or 1.5 mm) between the guide
and flipper mullion.
Set Screw
NOTE
If after adjusting doors higher the door makes a
popping/clicking sound, remove set screw and
replace with a longer one.
Adjusting Flipper Mullion Height
3 Re-tighten set screw.
Removing e Doors
Getting through narrow spaces
if your refrigerator will not fit through an entrance area,
you can remove the doors, Check first by measuring the
entrance.
To prepare for removing the doors:
Make sure the electrical power cord is unplugged
from the wall outlet.
2 Open the freezer drawer and remove the toe
grille (see "1nstallation" section).
3 Remove any food from the door shelves and
close the doors,
To remove the top hinge covers:
1 Remove the two (2) screws from each cover over
the top door hinges,
2 Lift inside edge of hinge cover and tilt back.
i
Hi
To remove the refrigerator doors:
1 Trace tightly around the door's top hinges with a
pencil. This makes reinstallation easier,
Disconnect the harness by grasping both sides of
the connector firmly, depress the latch, and pull
apart. Remove the two (2) screws from the top
hinge, Lift the door off of the bottom hinge and
set it aside.
Mulll-v_
I
I scr_ jzF'--....f
I "%_b _"-. I1| "._,l,Qe
NOTE
DO NOT remove the ground screw from hinge.
Detach the water tube from the connector
located behind the refrigerator and pull the tube
back out to the front of the unit, The connector
releases when you press inward on the outer
sleeve while pushing the tube toward the
connector then while continuing to hold in the
sleeve, pull the tube away.
Removin
the Doors 11
NOTE
You will be pulling approximately three (3) feet of
water tube from the back of the refrigerator.
4 Unscrew the three (3) lower hinge screws and
hinge if necessary.
To reinstall the right door, reverse the above steps.
Lower Hinge Removal
L
Once both doors are in place, ensure they are aligned
with each other and level (Please see the "Installation"
section for more details), and replace the top hinge
cover.
CAUTION
3 Lift drawer up and out to remove.
CAUTION
Drawer is heavy. Use caution when lifting.
Installing Freezer Drawer
1 With lower slides and basket pulled out, mount
drawer in reverse of removal.
2 Tighten drawer screws then turn another 1/4 turn.
3 Check gasket seal around freezer drawer. Make
adjustments on drawer screws if necessary.
Be sure doors are set aside in a secure position
where they cannot fall and cause personal injury,
or damage to the doors or handles.
Removing Freezer Drawer
1 Open freezer drawer,
2 Remove drawer screws on right and left sides
(two (2) screws on each side),
i_ii _I _i _
NOTE
DO NOT remove center screw from freezer drawer.
This is a factory adjustment,
2 lnstallin Door andles
Door Handle
1 Remove handles from
protective packaging.
2 Position fresh food handle
end caps (A) over upper
and lower pre-installed
shoulder bolts (B) that
are fastened into door,
ensuring the holes for
the set screws are facing
towards the opposite door.
3 While holding handle firmly
against door, fasten upper
and lower Alien set screws
(C) with supplied Allen
wrench,
4
Repeat steps 2 and 3 to
install opposite handle.
Ensure the holes for the
set screws are facing
towards the first door.
5
Position freezer handle
end caps over left and right
pre-installed shoulder bolts
that are fastened to the
door, ensuring the holes for
the set screws are facing
down.
6
While holding handle firmly
against door; fasten left
and right Allen set screws
(C) with supplied Allen
wrench,
oEnd
Cap
Mounting Refrigerator Handles
Mounting Freezer Handle
NOTE
To ensure that handles are flush with door, make sure that set screws are completely tightened.