Page 1
User manualRefrigeration
ETE4600, ETE4607,
ETE5400, ETE5407,
EBE4500, EBE4507,
EBE5300, EBE5307,
EBE5367, EHE5267,
EFE4227, ERE5047
Page 2
2 electrolux.com.au
CONTENTS
Important safety instructions ....................................3
Refrigerator features .................................................4
Top mount refrigerator features .......................4
Bottom mount refrigerator features ..................5
Standard ...........................................................5
Ice & Water .......................................................7
French door features ..................................... 7
All refrigerator features .....................................8
All freezer features ............................................9
Installing your new refrigerator ...............................10
Unpacking your refrigerator ...........................10
Locating your refrigerator. ..............................10
Installing your refrigerator...............................10
Fitting the handles ..........................................11
Ice & Water models ................................................11
Installation ......................................................12
Changing the water filter ................................14
Using your refrigerator ............................................15
Removing Features ........................................15
Crisper Bin ......................................................15
Freezer Shelves ..............................................15
Drawers with telescopic slides .......................15
Twist & Serve ice ............................................16
LED Lighting ...................................................16
Controlling ..............................................................17
About the User Interface ................................17
Functions of the user interface .......................18
The freezer user interface ...............................20
Error Codes ....................................................21
General information ................................................22
Cleaning the refrigerator .................................22
Food storage guide ........................................23
Troubleshooting ..............................................24
Ice maker troubleshooting ..............................26
Noises ............................................................27
Warranty Information ..............................................31
CONGRATULATIONS
Dear customer,
Congratulations and thank you for choosing our
refrigerator. We are sure you will find your new refrigerator
a pleasure to use. Before you use the refrigerator we
recommend that you read through the relevant sections
of this manual, which provides a description of your
refrigerator and its functions.
To avoid the risks that are always present when you use
an electric appliance, it is important that the refrigerator is
installed correctly and that you read the safety instructions
carefully to avoid misuse and hazards.
We recommend that you keep this instruction booklet
for future reference and pass it on to any future owners.
After unpacking the refrigerator, please check it is not
damaged. If in doubt, do not use the refrigerator but
contact your local customer care centre.
The symbols you will see in this booklet have these
meanings:
WARNING
This symbol indicates information concerning your
personal safety.
CAUTION
This symbol indicates information on how to avoid
damaging the refrigerator.
IMPORTANT
This symbol indicates tips and information about
use of the refrigerator.
ENVIRONMENT
This symbol indicates tips and information about
economical and ecological use of the refrigerator.
CONDITIONS OF USE
This refrigerator is designed and intended to be used in
normal domestic applications only.
Record model and serial number here:
Model number: ....................................................................
Serial number: .....................................................................
Page 3
3
NOTE: You must read these warnings carefully before
installing or using the refrigerator. If you need assistance,
contact your customer care centre. The manufacturer will
not accept liability, should these instructions or any other
safety instructions incorporated in this book be ignored.
WARNING
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety. Children should
be supervised to ensure that they do not play with
the appliance.
• It is essential the power point is properly earthed to
ground. Consult a qualified electrician if you
are unsure.
• Do not use electrical appliances inside the food
storage compartments of the appliance, unless they
are of the type recommended by the manufacturer.
• Unplug the refrigerator before cleaning or moving it to
avoid electric shock.
• Never unplug the refrigerator by pulling the electrical
cord as this may damage it. Grip the plug firmly and
pull straight out.
• If the power cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• Don’t use a steam cleaner. If live components come
into contact with condensing steam, they may shortcircuit or cause an electric shock.
• Do not store explosive substances
such as aerosol cans with a flammable
propellant in this appliance. If
pressurised aerosol containers bear
the word ‘flammable’ and/or a small
flame symbol, do not store them inside
any refrigerator or freezer. If you do so
you may cause an explosion.
• Do not damage the refrigerant circuit.
• This appliance contains insulation formed with
flammable blowing gases. Avoid safety hazards by
carefully disposing of this appliance.
• If you wish to discard this refrigerator, please contact
your local authorities and ask for the correct method
of disposal.
• When you dispose of your old refrigerators and
freezers, remove any doors. Children can suffocate if
they get trapped inside.
• The plug must be accessible when the appliance is
in position.
• Never try to repair the refrigerator yourself, only use a
qualified or authorised service person for repairs.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
R600a refrigerant warning
This appliance contains flammable R600a
refrigerant. Avoid safety hazards by carefully
installing, handling, servicing and disposing of this
appliance.
• Ensure that the tubing of the refrigerant circuit is not
damaged during transportation and installation.
• Leaking refrigerant may cause eye injuries or ignite.
• The room for installing appliance must be at least
1m
3
per 8g of refrigerant. The amount of refrigerant in
the appliance can be found on the rating plate inside
the appliance.
• If you are unsure of the refrigerant check the rating
plate inside the refrigerator compartment.
• It is hazardous for anyone other than an Authorised
Service Person to service this appliance. In
Queensland Australia the Authorisation Service
Person MUST hold a Gas Work Authorisation for
hydrocarbon refrigerants to carry out servicing or
repairs which involve the removal of covers.
• Keep ventilation openings in the appliance enclosure
or in the built-in structure, clear of obstruction.
• Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer.
Page 4
4 electrolux.com.au
Features may vary depending on model. Not all models will have features listed.
REFRIGERATOR FEATURES
MultiZone™ deli drawer
Use the MultiZone™ deli drawer to store
foods like small goods, fresh or cooked
meat and cheese, or as an additional
crisper. The drawer will prevent strong
food odours from impacting the rest
of the refrigerator. To remove the deli
drawer, pull it forward, then lift it up and
pull it further forward.
FreshZone™ double
insulated crisper
Use the crisper to store vegetables,
fruit or small goods.
Bottle storage bin
Use the bottle bin for tall bottle
storage. The bottle bin can be
removed by lifting it up over the
support lugs. To replace, push down
over the support lugs to lock in place.
Twist & Serve Ice
Refer to the section “Using your
Refrigerator” for details on removing,
relocating and using this feature.
LED lighting
Your refrigerator is fitted
with LED lighting.
ETE4607 illustrated
Glass shelves
The glass shelves improve visibility.
Door storage bin
The door bin can be removed by
lifting it up over the support lugs.
To replace, push down over the
support lugs to lock in place.
LED light
Dairy compartments
These compartments can be used
to store dairy.
FlexStor™ door bins
Slide the bins to meet different
storage needs. To remove, lift and
tilt. To replace, tilt the top and
push down until locked in place.
Refrigerator/freezer control panel
From this panel you can control the temperature of the
refrigerator and freezer compartments as well as setting
the Boost function or resetting the door alarm.
For further information on how to use this feature refer to
the section “About the User Interface”.
Wine caddy
FreshSense™
deodoriser
FreshSense™
deodoriser
Door bin mats
Prevent items placed in the bins
from sliding around, catch small
spills in the door bins and allow
small spills to be cleaned up by
simply putting the mats in the
dishwasher.
TOP MOUNT
Page 5
5
EBE5300 illustrated
Twist & Serve ice
Refer to the section “Using
your Refrigerator” for details on
removing and using this feature.
LED lighting
Your refrigerator is fitted with
LED lighting.
Refrigerator/freezer control panel
From this panel you can control the temperature of the
refrigerator and freezer compartments as well as setting
the Boost function or resetting the door alarm.
For further information on how to use this feature refer to
the section “About the User Interface”.
Features may vary depending on model. Not all models will have features listed.
Freezer storage bin
Refer to the section “Using your
Refrigerator” for details on removing,
and using this feature.
FlexStor™ door bins
Slide the bins to meet different
storage needs. To remove, lift and tilt.
To replace, tilt the top and push down
until locked in place.
Bottle storage bin
Use the bottle bin for tall bottle
storage. The bottle bin can be
removed by lifting it up over the
support lugs. To replace, push down
over the support lugs to lock in place.
MultiZone™
deli drawer
Use the deli drawer to store foods
like small goods, fresh or cooked
meat and cheese, or as an additional
crisper. The drawer will prevent
strong food odours from impacting
the rest of the refrigerator. To remove
the deli drawer, pull it forward, then
lift it up and pull it further forward.
Glass shelves
The glass shelves improve visibility.
Wine caddy
Crisper divider
Use the crisper divider to keep
vegetables, fruit or small goods
separated. (selected models only)
Dairy compartments
These compartments can be
used to store dairy.
FreshZone™ double
insulated crisper
Use the crisper to store vegetables,
fruit or small goods.
FreshSense™ deodoriser
Door bin mats
Prevent items placed in the bins from
sliding around, catch small spills in the
door bins and allow small spills to be
cleaned up by simply putting the mats
in the dishwasher.
BOTTOM MOUNT
Door storage bin
The door bin can be removed by
lifting it up over the support lugs.
To replace, push down over the
support lugs to lock in place.
Page 6
6 electrolux.com.au
EBE5367 illustrated
REFRIGERATOR FEATURES
LED lighting
Your refrigerator is fitted with
LED lighting.
Refrigerator/freezer control panel
From this panel you can control the temperature of the
refrigerator and freezer compartments as well as setting
the Boost function controlling the Ice Maker or resetting
the door alarm.
For further information on how to use this feature refer to
the section “About the User Interface”.
Features may vary depending on model. Not all models will have features listed.
Freezer storage bin
Refer to the section “Using your
Refrigerator” for details on removing,
and using this feature.
Door storage bin
The door bin can be removed by
lifting it up over the support lugs.
To replace, push down over the
support lugs to lock in place.
Bottle storage bin
Use the bottle bin for tall bottle
storage. The bottle bin can be
removed by lifting it up over the
support lugs. To replace, push down
over the support lugs to lock in place.
LED lighting
Automatic ice maker
Refer to the section “Using your
Refrigerator” for details on using
this feature.
Replaceable water filter
FreshZone™ double
insulated crisper
Use the crisper to store vegetables,
fruit or small goods.
MultiZone™ deli drawer
Use the deli drawer to store foods like
small goods, fresh or cooked meat and
cheese, or as an additional crisper. The
drawer will prevent strong food odours
from impacting the rest of the refrigerator.
To remove the deli drawer, pull it forward,
then lift it up and pull it further forward.
Glass shelves
The glass shelves improve visibility.
Crisper divider
Use the crisper divider to
keep vegetables, fruit or
small goods separated.
Dairy compartments
These compartments can be used
to store dairy.
Wine caddy
FreshSense™ deodoriser
FlexStor™ door bins
Slide the bins to meet different
storage needs. To remove, lift and
tilt. To replace, tilt the top and push
down until locked in place.
Door bin mats
Prevent items placed in the bins from
sliding around, catch small spills in the
door bins and allow small spills to be
cleaned up by simply putting the mats
in the dishwasher.
ICE & WATER
Page 7
7
7
FEATURES
EHE5267S illustrated
FRENCH DOOR ICE & WATER
Automatic ice maker
Refer to the section “Using your
Refrigerator” for details on using
this feature.
LED lighting
Your refrigerator is fitted
with LED lighting.
Features may vary depending on model. Not all models will have features listed.
Freezer storage bin
Refer to the section “Using your
Refrigerator” for details on using
this feature.
Bottle storage bin
Use the bottle bin for tall bottle
storage. The bottle bin can be
removed by lifting it up over the
support lugs. To replace, push
down over the support lugs to
lock in place.
Refrigerator/freezer control panel
From this panel you can control the temperature of the
refrigerator and freezer compartments as well as setting
the Boost function controlling the Ice Maker or resetting
the door alarm.
For further information on how to use this feature refer to
the section “About the User Interface”.
Dairy compartments
These compartments can be used
to store dairy.
Wine caddy
Glass shelves
The glass shelves improve visibility.
Crisper divider
Use the crisper divider to keep
vegetables, fruit or small goods
separated.
Replaceable
water filter
FreshSense™ deodoriser
MultiZone™
deli drawer
Use the deli drawer to store
foods like small goods, fresh or
cooked meat and cheese, or as an
additional crisper. The drawer will
prevent strong food odours from
impacting the rest of the refrigerator.
To remove the deli drawer, pull it
forward, then lift it up and pull it
further forward.
FreshZone™ double
insulated crisper
Use the crisper to store vegetables,
fruit or small goods.
FlexStor™ door bins
Slide the bins to meet different storage
needs. To remove, lift and tilt. To
replace, tilt the top and push down until
locked in place.
Door bin mats
Prevent items placed in the bins from
sliding around, catch small spills in the
door bins and allow small spills to be
cleaned up by simply putting the mats
in the dishwasher.
Page 8
8 electrolux.com.au
Features may vary depending on model. Not all models will have features listed.
SINGLE DOOR
ERE5047 illustrated
Door storage bin
The door bin can be removed by lifting
it up over the support lugs. To replace,
push down over the support lugs to
lock in place.
Bottle storage bin
Use the bottle bin for tall bottle storage.
The bottle bin can be removed by lifting
it up over the support lugs. To replace,
push down over the support lugs to
lock in place.
Refrigerator control panel
From this panel you can control the temperature of the
refrigerator compartments as well as setting the Boost
function or resetting the door alarm.
For further information on how to use this feature refer to
the section “About the User Interface”.
8 FEATURES
LED lighting
Your refrigerator is fitted
with LED lighting.
Glass shelves
The glass shelves improve visibility.
Wine caddy
Dairy compartments
These compartments can be used to
store dairy.
Replaceable
water filter
FreshZone™ double
insulated crisper
Use the crisper to store vegetables,
fruit or small goods.
MultiZone™ Deli drawer
Use the deli drawer to store foods
like small goods, fresh or cooked
meat and cheese, or as an additional
crisper. The drawer will prevent
strong food odours from impacting
the rest of the refrigerator. To remove
the deli drawer, pull it forward, then lift
it up and pull it further forward.
FreshSense™ deodorisor
FlexStore™ door bins
Slide the bins to meet different storage
needs. To remove, lift and tilt. To
replace, tilt the top and push down until
locked in place.
Door bin mats
Prevent items placed in the bins from
sliding around, catch small spills in the
door bins and allow small spills to be
cleaned up by simply putting the mats
in the dishwasher.
REFRIGERATOR FEATURES
Page 9
9
Features may vary depending on model. Not all models will have features listed.
SINGLE DOOR
Storage bins
Refer to the section “Using your
Refrigerator” for details on removing, and
using this feature.
LED lighting
Your freezer is fitted with LED lighting.
Freezer control panel
From this panel you can control the temperature of the
freezer as well as setting the fast ice function or reset the
door alarm.
For further information on how to use this feature refer to the
section “About the User Interface”.
EFE4227 illustrated
Automatic ice maker
Refer to the section “Using your
Refrigerator” for details on using
this feature.
9
FEATURES
Glass shelves
The glass shelves improve visibility.
FREEZER FEATURES
Page 10
10 electrolux.com.au
UNPACKING
ENVIRONMENTAL TIPS
ENVIRONMENT
Most of the packing materials are recyclable.
Please dispose of those materials through your
local recycling depot or by placing them in
appropriate collection containers.
Important – check for any damages or marks. If you find
the refrigerator is damaged or marked, you must report it
within 7 days should you wish to claim for damage/ marks
under the manufacturers warranty. This does not affect
your statutory rights.
Clean your refrigerator thoroughly following the instructions
in the “Cleaning” section and wipe off any dust that has
accumulated during shipping.
LOCATING THE REFRIGERATOR
CAUTION
Automatic aerosol systems (such as insect control)
should not be located adjacent to the product as
the spray may cause long term damage to the
external surfaces of the appliance.
Do not put the refrigerator in a location that is too cold or is
unprotected, for example in a garage or on a veranda. The
ambient temperature should be above 10°C.
Put the refrigerator in a dry place avoiding areas of high
moisture or humidity.
Ensure the refrigerator is located on an even surface.
Adequate ventilation around your refrigerator
The diagram below shows the recommended airspace to
allow for ventilation of your refrigerator.
350mm
50mm
Recommended
airspace
CABINET
DOOR
30mm
30mm
X
Y
If you have a cupboard above the refrigerator with a rear gap
of less than 100 mm (Y), recommended clearance at the top of
the refrigerator increases from 50mm to 90mm (X) minimum.
When positioned in a corner area, spacing of at least
350mm (300mm for multi-door models) on the hinge side
will allow the doors to open enough to enable the removal
of bins and shelves.
NOTE: Doors are designed to sit proud of cabinetry (not
flush). The clearances shown above are the recommended
minimum clearances.
The clearance at the rear must not exceed 75mm.
INSTALLING YOUR NEW APPLIANCE
INSTALLING YOUR REFRIGERATOR
1. Roll the refrigerator into place.
10 - 15mm
Fixed rear rollers
Height adjusting nut
The rollers are designed for forward or backward
movement only. They are not castors. Moving the
refrigerator sideways may damage your floor and the
rollers. Before moving your refrigerator ensure height
adjusting nut and the stability foot are fully wound up
off the floor.
2. Wind the large height adjusting nut under door hinge
down until the refrigerator is tilted back by 10mm
(see diagram).
3. Wind the large height adjusting nut on the handle
side down until the refrigerator is level and stable. If
you have difficulty winding the nut or height adjusting
foot down, have someone tilt the refrigerator back so
you have better access.
stability foot
wound up
4. Check the alignment of the refrigerator to the
surrounding cupboards to see if it is level. You can
adjust the level as detailed in step 2 and 3.
adjust front feet for
uneveness of oor
eg. wind this foot
down or up.
top of refrigerator is
level ie horizontal.
aligned to
cupboards
ie even gap.
Page 11
11
5. If you find your refrigerator rocks from corner to
corner, it means your floor is uneven. Find a piece
of plastic or hardboard etc. and pack it firmly under
the roller.
6. You may now need to fine-tune the installation by
repeating steps 3, 4 and 5.
7.
When you have the appliance in its final position, it
needs to be stabilised. Wind the stability foot under
the door hinge down to the floor until it just makes
contact with the floor. Lift the front of the appliance
to take the weight off the stability foot, then turn it
half a turn further to ensure firm contact with the
floor. Wind the large height adjusting nut back up to
ensure all the weight is now on the front stability foot.
8. Repeat step 7 for the stability foot on the handle
side. Whenever you need to move the appliance,
be sure to wind the feet back up so that the
appliance can roll freely and be sure to reset it
when reinstalling.
stability foot
wound down
Large height
adjusting nut
wound up.
9. Plug your refrigerator straight into its own power
point and never use a double adapter. If you need
to roll the refrigerator to get to the plug, remember
to raise the stability foot first.
10. Before you put any food in your refrigerator, it’s
recommended you leave it on for 2 or 3 hours to
check it is running properly.
FITTING THE HANDLES
For models with ‘Pole’ handles, the handles are supplied
prepackaged with your refrigerator and will require fitting.
Refer to the instructions provided in the pack.
Congratulations! You have successfully installed your
new refrigerator.
WARNING
Connect to potable water supply only, if using tank
or bore water in a model with an internal filter it is
recommended to also use an external filter
(not supplied).
The new hose sets supplied with the appliances
must be used and old hose sets should not
be reused.
Never connect the appliance to a hot water supply.
WATER FILTER
It should not be used on water that is micro biologically
unsafe or with water of unknown quality. The service life of
the filter may be reduced in water supplies that contain an
excess of particles or other impurities. Reduced flow rate is
an indication that a new filter is required. Failure to replace
the filter when required can affect the function of the ice
maker. Service calls caused by a failure to replace the filter
are not covered by warranty. Replacement water filters
are available from Electrolux Home Products Spare Parts
Centres and can be posted to you for your convenience
(refer to spare parts contact numbers on the warranty page).
Contents of installation kits
1 x water filter with push fit connections
2 x mounting brackets and screws
4 + 1 metres of water tubing
1 x 1/2” tap fitting
DATE FITTED___/___/___
2 x circlips
Filter Kit for single door freezer
4 metres of water tubing
1 x 1/2” tap fitting
Installation Kit
Bottom mount &
single door all refrigerator)
Water supply and plumbing
A drinkable water supply to suit a 1/2” tap fitting is
required adjacent to the refrigerator. It is recommended
that a licensed plumber install a new water supply outlet
nearer to the appliance should the tubing supplied not be
long enough. It is not recommended that the tubing be
extended as this could adversely affect the flow of water
to the ice maker or water dispenser. The water dispenser
and automatic ice maker require a drinkable water supply
with a pressure range of between 206kPa and 689kPa
(30PSI and 100PSI). If the water supply is above 100psi a
pressure limiting valve should be installed.
ICE AND WATER MODELS
Page 12
12 electrolux.com.au
ICE AND WATER MODELS (CONTINUED)
It is recommended that a noise reduction valve also
be fitted in the water supply line. This will reduce water
hammer and its effects from quick action household taps
and fast acting valves on appliances.
The refrigerator water valve is pre-fitted with a push-fit
connector for inserting the water tube. When the tap
connection is other than 1/2”, adapters can be purchased
from plumbing supply stores or good hardware stores.
INSTALLATION
Please read before beginning installation.
The water connection to your ice and water product can
be self installed. However, it is recommended that you
seek advice from a licensed plumber before commencing
the installation.
IMPORTANT
Check for water leaks at all water connection
points in the first 2 to 3 hours after installation, and
correct it in case of any water leak. Recheck after
24 hours; if a leak still occurs, it is recommended
to contact a licensed plumber for advice.
Water is to be connected as per diagrams below.
Internal Filter
Single door freezer with external filter
sink
brackets
mains
water inlet
kitchen
cupboard
filter
Step 1.
Ensure that the refrigerator is
disconnected from
power supply.
Step 2.
Connect tap fitting to water
supply tap. Tap must be close
to the refrigerator.
Step 4.
Install brackets for filter close
to tap. Plan to leave as much
tubing as possible behind the
refrigerator to enable it to be
moved easily for cleaning
or service.
Do not screw the brackets into
the refrigerator as this may void
your warranty and permanently
damage the refrigerator.
Step 5.
Write date on filter. The filter
will need to be replaced every
6 months.
Step 6.
Extend the collar and clip a
circlip around the collar at both
ends of the filter.
Step 7.
Fit the filter to brackets with
water flow arrow pointing up.
water
flow
direction
Step 3.
Push the tube into tap fitting past insertion mark.
(NOTE: step 4 to step 10 relate to models with an
external filter only).
Page 13
13
Step 8.
Push shorter tube into tap
fitting past insertion mark.
Step 9.
Push other end into filter INLET.
Step 10.
Connect remaining tube length
into filter OUTLET. Water filter
contains carbon dust which
is non-toxic. Using a large
container, turn on water and
purge the residual carbon dust
from filter until water runs clear.
Step 11.
Connect other end of remaining
tube length to inlet on bottom
right hand side of refrigerator.
Step 12.
Turn on water and check all
joints and tubes for leaks.
Step 13.
Reconnect the power.
Step 14.
Switch On Water Dispenser (except model EFE4227.)
Using a large container, run the water dispenser to clear air
from lines. This may take a few minutes. Purge and
dispense a minimum of 2 litres of water. Initial water may
be black in colour. This is residual carbon dust from the
filter and is non-toxic. If the water is slow to shut off or the
dispenser is dripping, air may still be in the lines. Either
purge more water through the system to remove this air or
allow some time for the air to be removed over subsequent
dispensing. For normal use, water dispenser will
automatically shut off after 2 minutes of continuous
operation.
IMPORTANT
As the water cut off is not instant, leave the glass
under the dispenser briefly until the water has
stopped flowing to avoid spills.
Clean and empty the dispenser drip tray regularly
to avoid overflow.
If you have not used the dispenser for some time,
discard the first seven or eight cups of water
(contaminants could have settled in the
water pipes).
Step 15.
Switch ON Ice Maker. (except model ERE5047.)
Refer to Controlling section
Once the refrigerator has been running for at least 24
hours remove the ice bin and dispose of the first few
batches of ice to ensure that impurities have been flushed
from the system.
Party Ice (except model EFE4227)
When the Ice Bin is removed from the cabinet the
Auto Ice Maker will continue to dispense ice into the top
freezer drawer.
CAUTION
Water dispenser should not be used for extended
periods of time. After 2 minutes of continuous use
the water dispenser will automatically shut off.
Page 14
14 electrolux.com.au
CHANGING THE WATER FILTER
IMPORTANT
• Always fit the filter as per
manufacturer’s instructions.
• If you need to replace water tube, only use
approved water quality piping that meets the
pressure requirements.
• Make sure your refrigerator is level to avoid
uneven ice cubes.
• Replace filter at suggested intervals to avoid
water/ice reduction and irregularities in taste.
• Remove and clean ice bin once a month,
discarding unused ice cubes. This will ensure
fresh, clean ice and smooth operation of your
ice maker.
• Clean and empty the dispenser drip tray
regularly to avoid overflow.
WARNING
If you have not used the dispenser for some time,
discard the first seven or eight cups of water and
any ice that the ice maker produces in the first
24 hours (contaminants could have settled in the
water pipes).
Internal Water filter
The water filter is located at the top left side of the fresh
food compartment.
Replacing the water filter
You should change the water filter every six months to
ensure the highest possible water quality.
If your refrigerator has not been used for a period of time
(during a house move for example), change the filter before
reinstalling the refrigerator.
It is not necessary to turn the water supply off to change
the filter. Be ready to wipe up any small amounts of water
released during the filter replacement.
1. Ensure that the ice maker is turned off (Diagram 1).
2. Remove the filter by turning anti-clockwise 180˚.
3. Slide the old water filter cartridge straight out of the
housing and discard it. (Diagram 2).
4. Unwrap the new filter cartridge and using the
alignment guide, slide it gently into filter housing until
it stops against the filter connection at the back of the
housing. (Diagram 3).
5. Engage the filter by firmly rotating clockwise until
the filter snaps into position (once engaged the filter
cannot be rotated further). (Diagram 4).
6. Press a drinking glass against the water dispenser
while checking for any leaks at the filter housing. Any
spurts and sputters that occur as the system purges
air out of the dispenser system are normal.
7. After filling one glass of water, continue flushing the
system for about four minutes.
8. Turn on the ice maker. (Diagram 5).
9. When the filter has been replaced press and hold the
‘Ice and Water’ button for three seconds to reset the
filter replace timer.
Diagram 2
Diagram 3
Diagram 4
Diagram 1
Diagram 5
ICE AND WATER MODELS (CONTINUED)
Page 15
15
USING YOUR REFRIGERATOR
Refrigerators work by transferring heat from the food inside
to the outside air. This operation makes the back and sides
of the refrigerator feel warm or even hot particularly at
start-up and on warm days – this is normal.
Avoid placing food against the air vents in the refrigerator
as it affects efficient circulation. If the door is opened
frequently, a light frosting will occasionally occur on the
freezer’s interior. This is normal and will clear after a few
days. If the freezer door is accidentally kept open, a heavy
frost will coat the inside walls and should be removed.
Your new refrigerator uses a high-speed compressor,
along with other energy-efficient components, which may
make unusual sounds and be more noticeable at night
and quieter times. These sounds simply indicate your
refrigerator is working how it should. They include:
• Compressor running noises;
• Air movement noise from the small fan motor;
• A gurgling sound, similar to water boiling;
• A popping noise, heard during automatic
defrosting; and
• A clicking noise, prior to compressor start-up.
Further details can be found in the Troubleshooting Guide.
IMPORTANT
For top mount refrigerators (where the freezer is
on top of the fresh food compartment).
• Don’t place food forward of the ribs on the freezer
floor, as it will keep the door open.
Ribs
For bottom mount refrigerators (where freezer is below the
fresh food compartment):
• Ensure all freezer drawers and shelves are pushed
back completely to prevent them from keeping the
door open.
REMOVING FEATURES
FreshZone™ Double Insulated crisper
Removal
1. Empty food from the crisper. On some models it will
be necessary to remove the bottle storage bins.
2. Pull the crisper drawer to the fully open position and
lift off the extension slides.
3. Remove the double insulated insert by lifting vertically
out of the crisper drawer.
The double insulated insert and crisper drawer assembly
should be cleaned using a soft cloth and mild detergent
diluted in warm water.
Double Insulated Crisper Shelf
- Removal, disassembly and cleaning (Bottom
mount models)
1. Remove the crisper drawer from the extension slides
and take out of the refrigerator.
2. Pull to remove the crisper shelf assembly from
the refrigerator.
3. Unclip the rear of the shelf glass by flexing the rear
of the shelf frame.
4. Slide the glass out of the shelf frame by pulling it
towards the rear of the shelf frame.
Page 16
16 electrolux.com.au
IMPORTANT
Handle the glass carefully, taking care not to strike
the edges of the glass.
5. Remove the double insulated insert.
6. Clean the frame assembly, glass and double
insulated insert using a soft cloth and mild detergent
in warm water. Dry using a soft cloth.
Freezer shelf
Remove the freezer shelf by lifting the catches on the right
and left underside of the shelf to release the shelf then
pull the shelf toward you.
Drawers fitted with telescopic slides
To remove the drawer for cleaning.
1. Empty food from the drawer.
2. Remove the drawer by pulling it forward and lifting
the front to unhook it from the slides. Once you have
removed the drawer, ensure the slides are pushed
back so they are fully closed.
WARNING
Never close the door while the telescopic slides
are extended. This may damage the slide and/
or refrigerator or cause the slide to become
disengaged from the refrigerator.
To replace the drawer:
1. Ensure the telescopic slides are pushed in all the way.
2. Slide the drawer into place over the slides and push
the bin in until it stops.
3. Drop drawer into position.
Door bin mats
The door bin mats prevent items placed in the bins from
sliding around, catch small spills in the door bins and allow
small spills to be cleaned up by simply putting the mats in
the dishwasher.
The mats are constructed from food-grade silicon and are
dishwasher safe.
To remove the door bin mats, pull on the tab and lift
vertically from the door bin. To refit, align the mat in the
door bin and push down into place.
Freezer bottom bin
To remove the bin, pull the drawer out until it is open all the
way then lift bin out from the front of the bin. When refitting
insert the rear of the bin first then lower into position.
When replacing the bins after cleaning, we recommend
fitting the lower bin first.
Twist and Serve Ice
Mounting the twist & serve dispenser to the other side of
the freezer.
NOTE: this is only possible on Top mount models.
1.
Remove the ice bin and ice cube tray. If the ice tray
assembly is frozen to the carriage, simply squeeze
the tray and shelf together to break the ice.
USING YOUR REFRIGERATOR (CONTINUED)
Page 17
17
CONTROLLING
ABOUT THE USER INTERFACE
The following pages explain the various functions of the
user interface to help you better understand how to get the
most out of your new refrigerator.
IMPORTANT
NOTE: When you set a temperature, you set an
average temperature for the whole refrigerator
cabinet. Ensuring that you make only small
adjustments and wait at least 24 hours to see if the
new temperature is correct to your liking.
Checking the softness of ice cream is a good indication
that your freezer is the right temperature, while checking
the temperature of water kept in the refrigerator is a good
way of checking the temperature of the food compartment.
Temperatures inside each compartment may vary,
depending on how much food you store and where you
place it.
High or low room temperature may also affect the actual
temperature inside the refrigerator.
2. Before you remove the ice carriage, remember to
disengage it from the glass shelf as it may result in
damage to the assembly.
3. Remove the centre runner by disengaging it at the
front of the shelf, and removing it from the rear.
Insert into the slot at the rear of the shelf Then engage into the front of the shelf
4. Refit the runner into the rear of the shelf on the right
hand side and then engage the front.
5. Fit the carriage by sliding it into the runners until the
front if the carriage engages with the shelf.
6. Refit the ice tray and ice bin.
WARNING
Fill the ice cube tray with potable water only.
CAUTION
LED lighting
Your appliance is fitted with long life LED lighting.
In the unlikely event the LED lights should fail,
then the LED lights should be serviced by the
manufacturer.
Refer to the warranty page for contact details.
Page 18
18 electrolux.com.au
FUNCTIONS OF THE USER INTERFACE
IMPORTANT
The factory default settings for the refrigerator
is “3°C” and “-18°C” for the freezer. If you want
to change the temperature, remember to make
only small adjustments and wait 24 hours to
see if it’s correct.
Button / Icon Description Primary Function
1 Compartment Selector button Selects controllable compartment.
2 Lock Icon Indicates if the user interface is locked.
3 Compartment Icon Indicates controllable compartment.
4
ECO Icon
Indicates if the appliance is operating in its most energy
efficient mode.
5 Digital display Indicates temperature of selected compartment.
6 Decrease button Decreases temperature of selected compartment.
7 Increase button Increases temperature of selected compartment.
8 Mode indicators (Boost, Fast Ice, Holiday) Indicates appliance operation mode.
9 Display Lock button Selects lock state of user interface.
10 Mode select button Selects operation mode of appliance.
11 Drinks Chill button Selects drinks chill timer.
12 Filter status indicators Indicates filter replacement timing.
13 Icemaker and Water on off indicators Shows operational status.
14 Ice & Water or Water on/off button Selects operation status.
15 Door sensor Senses door state (open or closed).
ETE4600, ETE4607, ETE5400,
ETE5407, EBE4500, EBE4507,
EBE5300, EBE5307
2
4
5
7
10
11
12
13
15
3
6
8
9
14
1 1
4
5
7
10
11
12
13
15
2
3
6
8
9
14
9
1
4
5
7
10
11
15
2
3
6
8
9
EBE5367, EHE5267 ERE5047
CONTROLLING (CONTINUED)
Page 19
19
Function Icon Operation (depending on model)
Setting the temperature Press button 1 to select compartment on icon 3
Press buttons 6 or 7 to adjust temperature up or down.
Boost mode
Increases the chill rate of the
refrigerator for 90mins before returning
to pre-set mode.
Press button 10 until the snowflake icon is illuminated.
Boost mode can be deselected using button 10.
Fast Ice
Decreases the freezer temperature to
-23°C for 12 hours before returning to
pre-set mode.
Press button 10 until the fast ice icon is illuminated.
Fast ice mode can be deselected using button 10.
Holiday mode
The refrigerator minimises defrosting
to save energy when doors remain
closed for an extended period.
Press button 10 until the holiday icon is illuminated.
When holiday mode is enabled the temperature settings will be set to 3°C for
the refrigerator and -18°C for the freezer.
Holiday mode can be deselected using button 10 or opening the fridge door.
When holiday mode is disabled the temperature settings will revert to the
previous settings.
Holiday mode can be deselected using button 10 or opening the fridge door.
Display Lock
Deactivates the user interface controls.
To turn on/off press and hold button 9 for 3 seconds,
the lock icon is illuminated when activated.
Drinks Chill
Sets a timer for between 1 and 30
minutes as a reminder for when drinks
are placed in the freezer for quick chill.
To turn on press button 11 and initial time of 20 mins will appear on digital display.
To adjust time use buttons 6 and 7.
Alarm will sound when time is finished.
Press button 11 to turn off during or after countdown. The time taken to chill
depends on the size of your bottle.
Do not leave the bottle inside the freezer longer than the time needed
for chilling.
Ice Maker on/off
Enables/disables ice maker and water
dispensing features.
To enable/disable press button 14 to cycle through on/off modes.
Indicator 13 will illuminate when either the ice maker or water dispenser are
deactivated.
Ice Cube Size
Ice cube size can be adjusted for
personal preference or to suit supply
water pressure.
Press and hold buttons 10 and 14 for 3 seconds.
Press button 6 to cycle through cube sizes, small (S), medium (M), large (L) &
extra large (EL). Medium symbol shown.
To confirm the setting press button 10.
The display will return to the preset mode after 45 seconds.
Sabbath Mode
Disables all lights and other electrical
activity from occurring when the
refrigerator door is opened.
To enable and disable Sabbath mode, press and hold buttons 7 and 9 for
3 seconds.
When enabled/disabled an alarm will beep 4 times and “Sb” will appear on
digital display when active.
Indicator Icon Operation
Eco Mode
Enabled when appliance set to energy
efficient operating temperatures.
ECO icon automatically appears when refrigerator is set between +3°C and
+7°C and freezer is set between -14°C and -18°C
Order Filter
Reminder when the water filter
periodically requires replacement.
Order filter icon will appear as a reminder to order a replacement water filter.
When the filter has been replaced press and hold button 14 for 3 seconds to
reset the filter replacement timer.
Replace Filter
Reminder when the water filter requires
replacement.
Replace filter icon and alarm will activate as a reminder to replace the water filter.
Mute alarm for 1 week by pressing any button on the user interface.
When the filter has been replaced press and hold button 14 for 3 seconds to
reset the filter replacement timer.
TIPS & INFORMATION
IMPORTANT
The factory default settings for the refrigerator is “3°C” and “-18°C” for the freezer. If you want to change
the temperature, remember to make only small adjustments and wait 24 hours to see if it’s correct.
Page 20
20 electrolux.com.au
Description Operation / Primary Function
Fast Ice on/off LED Indicates the status of the Fast Ice function.
Ice Maker on/ off LED Indicates the status of the Ice Maker function.
Fast Ice/Ice Maker button
Turning Automatic Ice Maker
On/Off
Use the Fast Ice function when you add a large amount of food to the freezer
compartment;
• Press the ‘Fast Ice/Ice Maker’ button. The Fast Ice icon will flash indicating that the
Fast Ice is active. and the compressor will run continuously for 12 hours
• After 12 hours the freezer will automatically return to normal mode.
•
The Fast Ice function can be cancelled anytime by pressing the button again.
• Press and hold the ‘Fast Ice’/Ice Maker button for 3 seconds.
The Ice Maker LED will activate indicating that the Ice Maker is active.
• Ice Maker can be turned off at any time. Press and hold the 'Fast Ice'/Ice Maker
button for 3 seconds.
Ice cube size
Ice cube size can be adjusted
for personal preference or to
suit supply water pressure
Extra large
Large
Medium
Small
Press “Temp” and “Fast Ice” buttons together for 3 seconds
within first 12 seconds of appliance starting. Four pre-set ice
cube sizes can be selected by the user. Press “Fast Ice” button to
scroll through options and press “Temp” button to confirm.
Freezer temperature
scale icons
Indicates the temperature setting of the freezer compartment.
Temperature adjust button Press any button to awaken control.
Press the ‘Temp’ button to decrease the compartment temperature. Once the coldest
temperature is reached the display will return to the warmest setting with the next press.
Replace filter
Reminder for when the water
filter requires replacement.
Replace filter alarm will activate as a reminder to replace the water filter.
An alarm will sound and the Fast Ice on/off icon will flash. Hold "TEMP" button for
3 seconds to reset.
IMPORTANT
The factory default settings for the freezer is “-18°C”. If you want to change the temperature,
remember to make only small adjustments and wait 24 hours to see if it’s correct.
THE FREEZER USER INTERFACE
Fast Ice/ Ice maker on/off button
Temperature adjust/Replace filter button
Freezer
temperature
scale LEDs
Fast Ice
on/off LED
Ice Maker
on/off LED
EFE4227
CONTROLLING (CONTINUED)
Page 21
21
ERROR CODES & ALARMS
Error code What it means… What to do…
Communication Error
If you see this icon displayed (electronic
display models) or the top temperature
icon is flashing it means that the control
has lost contact with the main
control board.
The appliance will operate at its last
known setting, all auxiliary functions will
not work.
Turn the unit off at the power
point for 5 minutes and then turn it
back on.
Under most circumstances this will
reset the display enabling normal
function to continue.
If the error re-occurs then call
for service.
Sensor
– Open Circuit /Short Circuit
If you see this icon displayed (electronic
display models) or any combination of the
second and fourth temperature icons are
flashing it means that an error has been
detected on a sensor.
The refrigerator will run in a default cycle
to prevent food spoilage.
Call for service.
Alarm Icon What it means Operation
Freezer Temperature Alarm
(Except Single door freezer)
Activates if the freezer temperature is
10°c over set temperature for a period of
50 minutes (except during a defrost).
An alarm will sound the temperature
icons will flash.
To deactivate the alarm for 50 minutes
press any button.
To deactivate alarm for 12 hrs on the ice &
water model press and hold Select Mode for
10 seconds for non ice and water models
press and hold any button for 10 seconds.
All Freezer Model
Door Alarm
Activates if the refrigerator or freezer
doors are left open for longer than
2 minutes.
An alarm will sound the affected
compartment icon will flash and
the temperature and icons will fade
on and off.
• Alarm will sound and icon will flash
indicating which door is open.
(Ice & water models)
• To silence the alarm for 8 minutes while
the door is open press any button (the
icons will continue to flash until door
is closed).
Alarms
Error codes
Page 22
22 electrolux.com.au
CLEANING YOUR REFRIGERATOR
WARNING
BEFORE CLEANING: Turn the refrigerator off at the
power point and unplug the cord to prevent any
chance of electrocuting yourself.
Your stainless steel refrigerator is manufactured
from mark-resistant stainless steel. This
stainless steel has a special advanced protective
coating that eases the removal of marks such
as fingerprints and water spots. To keep its
appearance, clean it regularly with lukewarm
soapy water and a soft cloth.
CAUTION
Never use stainless steel cleaners, abrasive pads
or other cleaners that will scratch the surface.
Damage to the appliance after delivery is not
covered by your warranty.
Interior
Clean the inside of your refrigerator regularly with a
soft cloth, unscented mild soap and lukewarm water.
Thoroughly dry all surfaces and removable parts and
avoid getting water on the controls. Replace removable
parts, plug power cord in and switch the power on before
returning the food.
Ice and Water
Clean the components of the ice maker /water dispenser
regularly with a soft cloth, unscented mild soap and rinsing
thoroughly with lukewarm water.
For further information on the care and cleaning of your
Icemaker, Ice dispenser of water dispenser refer to the
section "Ice and Water Models"
Door seals
Always keep door seals clean by washing them with a mild
detergent and warm water, followed by a thorough drying.
Sticky food and drink can cause seals to stick to the
cabinet and tear when you open the door.
Never use hot water, solvents, commercial kitchen
cleaners, aerosol cleaners, metal polishes, caustic or
abrasive cleaners, or scourers to clean your refrigerator.
Many commercially available cleaning products and
detergents contain solvents that will damage your
refrigerator. Use only a soft cloth with an unscented mild
soap and lukewarm water.
CAUTION
To clean a crisper or freezer bin with telescopic
extension slides, simply wipe with a damp cloth
and warm soapy water.
Never immerse the cover in water, as this could affect the
operation of the slide.
Switching off your refrigerator
If you switch off your refrigerator for an extended period,
follow these steps to reduce the chances of mould:
1. Remove all food.
2. Remove the power plug from the power point.
3. Thoroughly clean and dry the interior.
4. Ensure that all the doors are wedged open slightly for
air circulation.
GENERAL INFORMATION
Page 23
23
FOOD STORAGE GUIDE
TIPS & INFORMATION
IMPORTANT
Please note, use this information as a guide only, actual storage times will vary depending on how
you use your refrigerator, climatic conditions and the freshness of the food.
Category Product Refrigerator Freezer Storage Tips
Meat Sausages and Mince 1-2 D ays 2-3 Months Keep cold meat at the back of the
refrigerator where it is coldest.
Chops and Steak 3-4 Days 4-6 Months
Cold Meats 3-5 Days 4-6 Months Plastic can cause meat to sweat if
stored in refrigerator for more than a
day.
Cuts for roasting 3-5 Days 12 Months Cuts for roasting can take up to 48
hours to defrost properly. Transfer
frozen cuts to the refrigerator 2 days
before use.
Poultry Chicken 1-2 Days 2 Months If poultry takes on a smell or colour
you are unsure about it is best to
throw it out.
Roast Chicken 3-5 Days 12 M on t h s
Eggs 6 Weeks Not Suitable Whole eggs are not suitable for freezing,
slightly beaten eggs may be frozen for
four months.
Seafood Whole fish and fillets 2-3 Days 2 Months Store in an airtight container or foil.
Lobster and crabs 1-2 Days 2 Months
Prawns 1-2 Days 2 Months Never freeze prawns in salty water as
this will dehydrate the flesh.
Dairy Milk Until Expiry Date Not Suitable If dairy takes on a smell or colour and
you are unsure about it, it is best to
throw it out.
Yoghurt 7- 10 Days Not Suitable
Hard Cheeses 2 Weeks – 2
Months
2 Months (Grated) Depending on the variety hard cheese
can last from 2 weeks to 2 months.
Soft Cheeses 1-2 We e ks Not Suitable
Butter 8 Weeks 12 M on t h s
Fruit &
Vegetables
Every fruit and vegetable has a different
shelf life.
Some stay fresh for a couple of days e.g
beans, others can last for a couple of
months e.g. onions.
8-12 Months
When freezing
chop and blanch
in small portions.
Keep vegetables in the crisper
and away from the air vents to
avoid freezing.
If you wash fruit and vegetables before
storing them make sure they are dry or
wrap in absorbent paper before storing
in the refrigerator as this can make them
susceptible to rotting.
Try to keep fruit and vegetables
separated as fruits that give off high
levels of ethylene (the ripening agent)
can prematurely ripen and spoil
surrounding vegetables
Page 24
24 electrolux.com.au
TROUBLESHOOTING
Appliance does not operate at desired temperature
In a modern frost free refrigerator / freezer, cold air is circulated around the various compartments through air vents using
a high efficiency fan.
Concern What to do
Refrigerator is too warm. Ensure food is allowed to cool before placing inside the refrigerator.
Ensure the appliance is set up as per instructions on page 11.
Ensure that contents are not obstructing the cooling vents.
Ensure the door is not held open or is being opened too frequently.
Freezer is too warm. Adjust temperature to a colder setting.
Ensure food is allowed to cool before placing inside the freezer.
Ensure the appliance is set up as per instructions on page 11.
Ensure that contents are not obstructing the cooling vents.
Ensure the door is not held open or is being opened too frequently.
Food is freezing in the
refrigerator.
Adjust temperature to a warmer setting.
Ensure that fruit and vegetables are stored in the crisper. Items with a high water
content should not be placed near the cooling vents.
Unable to change temperature
settings.
Refer to function guide in Controlling Your Refrigerator.
Ensure that user interface is in "awake" mode before trying to adjust temperature settings.
Appliance noise
Your new refrigerator may make sounds that your old one didn’t make. Because the sounds are new to you, you might be
concerned about them. Most of the new sounds are normal. Hard surfaces, like the floor, walls and cabinets, can make the
sounds seem louder than they actually are. The following describes the kinds of sounds and what may be making them.
Concern What to do
Motor noise (compressor).
Nothing. This is normal as your new refrigerator uses a variable speed compressor and
fan that at start up and on warm days runs at a high speed to provide additional cooling.
When less cooling is required the compressor and fan will run at a lower speed
Note that the compressor noise may seem louder at the start of the on cycle.
A clicking noise heard just before
the compressor starts.
Nothing. This is normal as your new refrigerator has an automatic switching action of
the temperature control, turning the compressor on and off.
Occasional gurgling, similar to
water boiling.
Nothing. As each refrigeration cycle ends, you may hear a gurgling sound due to the
refrigerant flowing in your refrigerator system.
Airflow noise.
Nothing, this is normal as your new refrigerator uses high efficiency fans to circulate
air. Fan speed and noise may increase during periods of heavy usage or hot weather.
Rattling and other noises.
Ensure that the cabinet is level and stable, refer to Installation Instructions on page 11.
Check the surrounds of the appliance to ensure there is nothing touching or placed
on top of the appliance.
Ensure that contents of the appliance are not placed in such a way that they are
vibrating (such as bottles).
Crisper Operation
Concern What to do
Excess moisture build up in crisper.
It is normal for there to be some
moisture and humidity in the
crisper bin.
Ensure that the crisper is not over packed.
Adjust crisper humidity slides.
Crisper bin can not be removed. If crisper bin interferes with the door bins, remove door bins before removing crisper.
Position cabinet so that the door can be fully opened.
Freezing items in the crisper. Adjust temperature to a warmer setting.
GENERAL INFORMATION (CONTINUED)
Page 25
25
TROUBLESHOOTING
Refrigerator operation
Concern What to do
Appliance will not run
It is normal for the freezer fan not
to operate during the automatic
defrost cycle, or for a short time
after the appliance is switched on.
Ensure that the cord is plugged into a live power outlet and outlet is switched on.
Ensure that the household circuit breaker has not tripped or that the fuse has not blown.
The appliance maybe in defrost mode, check again in half an hour.
Compressor motor seems to run
too long
At normal room temperatures,
expect your motor to run about
40% to 80% of the time. Under
warmer conditions, expect it to run
even more often.
The variable speed compressor
and fan that at start up and on
warm days runs at a high speed
to provide additional cooling.
When less cooling is required the
compressor and fan will run at a
lower speed.
Ensure that the doors are not held open.
Check that large amounts of warm food have not just been placed inside the appliance.
Note that the appliance will run more than normal just after you install it or when adjusting to
temperature setting changes.
The exterior of the appliance is
warm or hot to touch
This is normal because the
appliance transfers heat from the
inside out through the outer panels
and the divider between the doors.
Ensure the appliance has the external clearances recommended in the section “Installing your new
appliance”.
The exterior of the cabinet will be much warmer on warmer days it may even feel hot to touch, as the
appliance is working harder.
User interface will not respond
To ensure settings are not
accidentally changed the user
interface will go into sleep mode
when not in use.
Press any button to wake user
interface.
Check that the user interface is in awake mode, refer to section “About the user interface”.
Check that the user interface is not locked, refer to section “About the user interface”.
If the user interface is frozen turn the appliance off for five minutes for the memory to clear, then turn
back on.
Check that the user interface is not in Sabbath Mode, refer to control instructions.
(I&W models only).
Alarms sounding Check that all doors are fully closed.
Ensure that the over temperature alarm is not being activated by hot food placed in the freezer.
Check if the drinks timer has ended, refer control instructions.
Check if the Filter Replacement alert is activated, refer control instructions. (I&W models only)
Frost build up Check that all doors are fully closed.
Ensure that the doors are not opened too often.
Ensure that the return air vents are not blocked with packaging.
Ensure the seals are clean and not obstructed.
Odours The interior may need cleaning, refer to cleaning guide.
Ensure that food is stored correctly as some food, containers and wrapping can
produce odours.
Check appliance for old or unusual food.
Lights not working
The LED lighting is designed to
dim automatically if the door is left
opened for more than 5 minutes
and turn off completely if the door
is open for more than 7 minutes.
Closing the door will reset the
ti m e r.
The LED lighting is also designed
to turn on gradually.
Ensure that the cord is plugged into a live power outlet and outlet is switched on.
Ensure that the household circuit breaker has not tripped or that the fuse has not blown.
Check that the user interface is not in Sabbath Mode, refer to control instructions.
Close and re-open the door. When door has been open for 5 minutes the lights fade to 50% then
after 7 minutes they will turn off.
Page 26
26 electrolux.com.au
If you still require service
If you have a problem, and the problem persists after you
have made the checks mentioned, contact your nearest
Electrolux approved Service Centre or the dealer you
bought the refrigerator from. Be ready to quote the model
number, the 9-digit PNC and 8-digit serial number, which
is stated on the label inside the refrigerator compartment.
Automatic Ice maker system
Concern What to do
Ice maker does not produce ice or not
enough ice
The icemaker is designed to
produce a tray of ice approximately
every 3 hours, depending on room
temperature and water temperature..
Ensure that the cord is plugged into a live power outlet and outlet is
switched on.
Ensure that water is connected and turned on and there are no kinks in
the water line.
Ensure that the Ice Maker is switched on at the user interface refer to
"About the User Interface" for details.
Check that the water filter is not blocked or out of date.
Check the water supply flow rate.
If the freezer compartment is too warm, refer to "freezer is too warm" then
wait 24 hours for the freezer to reach ideal temperature.
Turn the unit off at the mains and leave for 2 minutes then turn the
appliance back on (this will reset the icemaker unit). Check for ice
production after 24 hours.
Check that there is no obstruction under the ice maker and ensure the ice
bin is fitted correctly.
Ice has bad odour or taste Cover food to ensure ice does not absorb foreign odours.
Check that the water filter is not out of date.
Interior of appliance or ice bin may require cleaning, refer to “Cleaning
your refrigerator”.
Discard stale ice monthly and allow ice maker to produce a fresh supply.
TROUBLESHOOTING
Door operation
Concern What to do
Freezer door pops open. This is normal and should re-close. This happens when the refrigerator
door is closed too quickly.
If the freezer door stays open, it indicates that the appliance needs to
be tilted backwards a little further. Refer to section “Installing your
new appliance”.
Self close not working. Check if your appliance has self closing hinges as not all models do.
It indicates that the appliance needs to be tilted backwards a little further.
Refer to section “Installing your new appliance”.
Door not sealing properly Ensure there is nothing that is preventing the door from closing such as
appliance contents or items placed near the appliance.
Ensure that the crisper/freezer bin is closed completely. Refit if required as
referred to in the section "Using your refrigerator".
Ensure the appliance is set up as per recommendations.
Door difficult to open and close If the door is difficult to open just after you have closed it this is due to the
pressure equalising, the door will open normally after a few minutes.
GENERAL INFORMATION (CONTINUED)
Page 27
27
NOISES
BRRR
!
HISSS!
CLICK!
BLUBB!
CRACK!
SSSRR
R!
OK
CLICK!
CLICK!
SSSRRR!
SSSRRR!
BRRR!
BRRR!
HISSS!
HISSS!
BLUBB!
BLUBB!
CRACK!CRACK!
Page 28
28 electrolux.com.au
NOTES
Page 29
29
NOTES
Page 30
30 electrolux.com.au
NOTES
Page 31
31
This document sets out the terms and conditions of the product
warranties for Electrolux Appliances. It is an important document.
Please keep it with your proof of purchase documents in a safe place
for future reference should you require service for your Appliance.
1. In this warranty:
(a) ‘acceptable quality’ as referred to in clause 10 of this warranty has
the same meaning referred to in the ACL;
(b) ‘ACL’ means Schedule 2 to the Competition and Consumer Act 2010;
(c) ‘Appliance’ means any Electrolux product purchased by you and
accompanied by this document;
(d) ‘ASC’ means Electrolux authorised service centres;
(e) ‘Electrolux’ means Electrolux Home Products Pty Ltd of 163
O’Riordan Street, Mascot NSW 2020, ABN 51 004 762 341 in
respect of Appliances purchased in Australia and Electrolux (NZ)
Limited (collectively ‘Electrolux’) of 3-5 Niall Burgess Road, Mount
Wellington, in respect of Appliances purchased in New Zealand;
(f) ‘major failure’ as referred to in clause 10 of this warranty has the
same meaning referred to in the ACL and includes a situation when
an Appliance cannot be repaired or it is uneconomic for Electrolux,
at its discretion, to repair an Appliance during the Warranty Period;
(g) ‘Warranty Period’ means the Appliance is warranted against
manufacturing defects in Australia and New Zealand for 24 months
and for the Appliance’s compressor, condenser, evaporator and drier,
an additional 36 months parts only warranty applies, following the
date of original purchase of the Appliance;
(h) ‘you’ means the purchaser of the Appliance not having purchased
the Appliance for re-sale, and ‘your’ has a corresponding meaning.
2. This warranty only applies to Appliances purchased and used in Australia
or New Zealand and used in normal domestic applications and is in
addition to (and does not exclude, restrict, or modify in any way) any
non-excludable statutory warranties in Australia or New Zealand.
3. During the Warranty Period Electrolux or its ASC will, at no extra charge
if your Appliance is readily accessible for service, without special
equipment and subject to these terms and conditions, repair or replace
any parts which it considers to be defective. Electrolux or its ASC may
use remanufactured parts to repair your Appliance. You agree that
any replaced Appliances or parts become the property of Electrolux.
This warranty does not apply to light globes, batteries, lters or similar
perishable parts.
4. Parts and Appliances not supplied by Electrolux are not covered by
this warranty.
5. To the extent permitted by law, you will bear the cost of transportation,
travel and delivery of the Appliance to and from Electrolux or its ASC. If
you reside outside of the service area, you will bear the cost of:
(a) travel of an authorised representative;
(b) transportation and delivery of the Appliance to and from Electrolux
or its ASC.
In all instances, unless the Appliance is transported by Electrolux or an
Electrolux authorised representative, the Appliance is transported at the
owner’s cost and risk while in transit to and from Electrolux or its ASC.
6. Proof of purchase is required before you can make a claim under
this warranty.
7. You may not make a claim under this warranty unless the defect claimed
is due to faulty or defective parts or workmanship. Electrolux is not liable
in the following situations (which are not exhaustive):
(a) the Appliance is damaged by:
(i) accident
(ii) misuse or abuse, including failure to properly maintain or service
(iii) normal wear and tear
(iv) power surges, electrical storm damage or incorrect power supply
(v) incomplete or improper installation
(vi) incorrect, improper or inappropriate operation
(vii) insect or vermin infestation
(viii) failure to comply with any additional instructions supplied with
the Appliance;
(b) the Appliance is modied without authority from Electrolux in writing;
(c) the Appliance’s serial number or warranty seal has been removed
or defaced;
(d) the Appliance was serviced or repaired by anyone other than
Electrolux, an authorised repairer or ASC.
8. This warranty, the contract to which it relates and the relationship
between you and Electrolux are governed by the law applicable where
the Appliance was purchased. Where the Appliance was purchased in
New Zealand for commercial purposes the Consumer Guarantee Act
does not apply.
9. To the extent permitted by law and subject to your non-excludable
statutory rights and warranties, Electrolux excludes all warranties and
liabilities (other than as contained in this document) including liability for
any loss or damage whether direct or indirect arising from your purchase,
use or non use of the Appliance.
10. For Appliances and services provided by Electrolux in Australia,
the Appliances come with a guarantee by Electrolux that cannot be
excluded under the ACL. You are entitled to a replacement or refund
for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the Appliance
repaired or replaced if the Appliance fails to be of acceptable quality and
the failure does not amount to a major failure.
The benets to you given by this warranty are in addition to your other
rights and remedies under a law in relation to the Appliances or services
to which the warranty relates.
11. At all times during the Warranty Period, Electrolux shall, at its discretion,
determine whether repair, replacement or refund will apply if an
Appliance has a valid warranty claim applicable to it.
12. For Appliances and services provided by Electrolux in New Zealand,
the Appliances come with a guarantee by Electrolux pursuant to the
provisions of the Consumer Guarantees Act, the Sale of Goods Act and
the Fair Trading Act.
13. To enquire about claiming under this warranty, please follow these steps:
(a) carefully check the operating instructions, user manual and the terms
of this warranty;
(b) have the model and serial number of the Appliance available;
(c) have the proof of purchase (e.g. an invoice) available;
(d) telephone the numbers shown below.
14. You accept that if you make a warranty claim, Electrolux and its ASC
may exchange information in relation to you to enable Electrolux to meet
its obligations under this warranty.
Warranty
FOR SALES IN AUSTRALIA AND NEW ZEALAND
APPLIANCE: REFRIGERATION
Important Notice
Before calling for service, please ensure that the steps listed in clause 13 above have been followed.
FOR SERVICE
or to nd the address of your nearest
state service centre in Australia
PLEASE CALL 13 13 49
For the cost of a local call (Australia only)
SERVICE AUSTRALIA
ELECTROLUX HOME PRODUCTS
electrolux.com.au
FOR SPARE PARTS
or to nd the address of your nearest
state spare parts centre in Australia
PLEASE CALL 13 13 50
For the cost of a local call (Australia only)
FOR SERVICE
or to nd the address of your nearest
authorised service centre in New Zealand
FREE CALL 0800 10 66 10
(New Zealand only)
SERVICE NEW ZEALAND
ELECTROLUX (NZ) Limited
electrolux.co.nz
FOR SPARE PARTS
or to nd the address of your nearest
state spare parts centre in New Zealand
FREE CALL 0800 10 66 20
(New Zealand only)
GFR_Warr_Sep15
Page 32
shop.electrolux.com.au
Electrolux Home Products Australia
telephone: 1300 363 640
fax: 1800 350 067
email: [email protected]
web: electrolux.com.au
Electrolux Home Products New Zealand
telephone: 0800 436 245
fax: 0800 225 088
email: [email protected]
web: electrolux.co.nz
To add a touch of
professional inspiration
to your home,
visit electrolux.com.au
or electrolux.co.nz
electrolux.com.au
or electrolux.co.nz
P/No. 811948424
© 2016 Electrolux Home Products Pty Ltd.
ABN 51 004 762 341
EMAN_TFBFMDSD_Jun16
Loading...